Elektronische Drehzahlregler

Spezifikationen:
Konstanter Strom: 90A
Burst-Strom: 120A
Akku: 2-6S LiPo
BEC: 5.5V / 4A
Motortyp: Sensorlos Brushless
Kühlung: Wassergekühlt
Größe: 87 x 38 x 22mm
Gewicht: 105g

Programmierfunktionen:
Laufmodus: Vorwärts mit Bremse / Vorwärts und Rückwärts mit Bremse / Vorwärts und Rückwärts
Beschleunigung: 6% / 9% / 12%
Niederspannungsschutz: Keine / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Startmodus (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Umkehrkraft: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatisch

Hobbyking ESC Programmierkarte

Anzüge Folgende Hobbyking WSR

Hobby König 120A ESC 4A UBEC
Hobby König 80A ESC 4A SBEC
Hobby König 60A ESC 4A UBEC
Hobby König 40A ESC 4A UBEC
Hobby König 30A ESC 3A UBEC
Hobby König 20A ESC 3A UBEC

Siehe unten zugehörige Artikel.

Dieser 45A gebürstet ESC ist ein guter Ersatz für Ihr Modell Lager des ESC oder zum Setzen eines neuen gebürstetem Energiesystem im Auto oder LKW auf. Es verfügt über eine niedrige Spannungsabschaltung für den Einsatz mit LiPoly Batterien. Sein kompaktes und leichtes Design machen es ideal für den Einsatz in 1/10 Maßstab Drift- Verwendung Bürstenmotoren.

Eigenschaften:
• Niederspannungsabschaltung für die Verwendung mit Lipo-Akkus
• Kompaktes und leichtes Design
• 5.6V / 2A BEC

Specs:
Dauerstrom: 45A
Burst - Strom: 320A (10sec)
Geeignete Auto: 1/10 auf und abseits der Straße
Batterie: 2 Zelle Lipo (5-6 Zellen NI-xx)
BEC - Ausgang: 5,6 V / 2A Schalter Modus eingebaut in
Motortyp: gebürstet
Operation: Vorwärts / Bremse / Rückwärts
Dimension: 38x28x22mm
Gewicht: 40g

Der Hobbyking Red Brick ESC s gewinnen wird nicht den ersten Platz für Stil, obwohl sie oben Punkte für Einfachheit und Zuverlässigkeit stattfinden wird. Mit einer Reihe von grundlegenden Programmierfunktionen diese ESC s eine perfekte Lösung für alle auf der Suche nach einem einfachen , aber robusten Drehzahlregler.

Die Red Brick ESC s wurden mit Wärmeableitung im Mittelpunkt . mit übergroßen Aluminium Kühlkörper sind die Red Brick ESC s etwas größer als viele ESC s in ihrer Klasse, aber dieser Kompromiss in der Größe unterstützt werden sollen , die Probleme mit Überhitzung assoziiert zu beseitigen.

Eigenschaften:
• Glatte, lineare Ansprechverhalten
• Verwendet leistungsstarke, Hochleistungs-MCU
• Mehrere Selbstschutzfunktionen: abnormal Spannungseingang, Batterieschutz, über Wärmeschutz, Drosselsignalverlust
• Programmierbare über Gasknüppel (siehe Anweisungen unter "Dateien" tab)

Specs:
Konstantstrom: 70A
Max Burst Strom: 90A
Eingangsspannung: 2 ~ 7S (7,4 ~ 25,9), 6 ~ 20 NiCd / NiMH
BEC: 5V / 5 A
Abmessungen: 60x35x18mm
Gewicht: 70g
Servo Lead: JR Typ

Der Hobbyking Red Brick ESC s gewinnen wird nicht den ersten Platz für Stil, obwohl sie oben Punkte für Einfachheit und Zuverlässigkeit stattfinden wird. Mit einer Reihe von grundlegenden Programmierfunktionen diese ESC s eine perfekte Lösung für alle auf der Suche nach einem einfachen , aber robusten Drehzahlregler.

Die Red Brick ESC wurde mit Wärmeableitung im Mittelpunkt . eine übergroße Aluminium Kühlkörper mit der FETS und und individuelle Kühlkörper für die MCU der Red Brick ESC ist etwas größer als viele ESC s in seiner Klasse, aber dieser Kompromiss in der Größe unterstützt werden sollen , die Probleme mit Überhitzung assoziiert zu beseitigen.

Eigenschaften:
• Glatte, lineare Ansprechverhalten
• Verwendet leistungsstarke, Hochleistungs-MCU
• Mehrere Selbstschutzfunktionen: abnormal Spannungseingang, Batterieschutz, über Wärmeschutz, Drosselsignalverlust
• Sicherer Start, Motor wird erst ESC ausgeführt wird bewaffnet richtig

Specs.
Max Amps: 200A
Ubec: 5V / 5A
Zellen: 2 ~ 7S 7.4 ~ 25.9V Lipo
Größe: 65x40x26mm
Gewicht: 128 g

Specs:
Konstantstrom: 50A
Burst - Strom: 70A
Batterie: 2-6S Lipo
BEC: 5.5V / 4A
Motor - Typ: Sensorless Brushless
Kühlung: Wassergekühlt
Größe: 87 x 38 x 22mm
Gewicht: 105 g

Programmierfunktionen:
Betriebsmodus: Vorwärts mit Bremse / Vorwärts und rückwärts mit Bremse / Vorwärts- und Rückwärts
Beschleunigung: 6% / 9% / 12%
Niederspannungs - Schutz: Keine / 2,6V / 2,8V / 3,0V / 3,2V / 3,4V
Startmodus (Punch): Stufe 1 / Stufe 2 / Stufe 3 / Stufe 4 / Stufe 5 / Stufe 6 / Stufe 7 / Ebene 8 / Stufe 9
Reverse - Kraft: 25% / 50% / 75% / 100%
Timing: 0 ° / 5 ° / 10 ° / 15 ° / 20 ° / 25 ° / 30 ° / Automatik

The QUICRUN series of ESCS is the latest range of competitively priced brushed and brushless Speed Controllers for use in a wide range of RC vehicle applications. 

The QuicRun WP 1625 is specially designed for beginners and intermediate modelers.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and programmable start mode.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Machen Sie das Beste aus Ihrem RC-Boot mit diesem leistungsstarken Regler. Das Schaltungsdesign wurde mit einer Hochleistungs-MCU entwickelt und sorgt für eine starke Entstörung und intelligente Technologie. Das wasserdichte Design bietet eine schnelle Gasannahme, eine reibungslose lineare Gassteuerung und einen programmierbaren Startmodus.

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and a low-voltage protection threshold.

Machen Sie das Beste aus Ihrem RC-Boot mit diesem leistungsstarken Regler. Das Schaltungsdesign wurde mit einer Hochleistungs-MCU entwickelt und sorgt für eine starke Entstörung und intelligente Technologie. Das wasserdichte Design bietet eine schnelle Gasannahme, eine reibungslose lineare Gassteuerung und einen programmierbaren Startmodus.

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

The AeroStar WiFi Connect offers an easier way to program an AeroStar WiFi electronic speed controller (ESC). This controller connects to your ESC via your Android phone or iOS device using WIFI to make it simple to configure and monitor your ESC.

For Android users you need to use this link and download the Android APK: https://drive.google.com/file/d/1Tkev-d0ggqEVN9QZy86MJ4tL8nVJDWdv/view

For iOS users you will need to download it via the Apple Store, APP name: Flycolor Configurator

The QUICRUN 880 Dual ESC is a durable, highly reliable waterproof electronic speed controller that has been designed for twin brushed motors in 1/10 and 1/8th scale vehicles. The HobbyWing patented copper heat conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the aluminum heatsink for faster and greater heat dissipation.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

The pocket sized Trackstar LED program card has been specifically designed to work with the brushed Trackstar crawler ESCs. It is very easy and intuative to use and makes the programming of the Trackstar brushed ESC's a simple matter.

A pair of replacement Aerostar 40A ESCs with wiring and connectors for the AVIOS KingTwin 1700.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Plush-32 Brushless ESC programming card is designed to make life easy. No more listening to the beeps, and guessing when to move your throttle to make changes to your ESC settings. This programming card changes settings with the press of a button, and easy-to-read LED’s let you know exactly how your ESC has been programmed. This programming card is a must for your Plush-32 series brushless ESC.

Now with the updated Rev1.1.0 firmware, this program card offers a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available for the 150A ESC). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this delay can be set from between 1 and 10mins using this program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use this programming card to program earlier versions of the Plush 32 series but only ESC's with the Rev1.1.0 firmware will show the revised functions.