Fernsteueranlagen

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

Want to experience the efficiency, long range, and low latency of the ELRS protocol without purchasing a new radio? Then RADIOMASTER has you covered!

The Ranger Nano 2.4GHz ELRS module represents the cutting edge in ELRS technology, and it's compatible with the RADIOMASTER Zorro series and more. It features F-1000Hz refresh rates, a high-efficiency cooling system, WiFi, and Bluetooth connectivity, and a T antenna. Enjoy all that ELRS has to offer with a RADIOMASTER Ranger Nano TX module.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RADIOMASTER MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by the EdgeTX and ExpressLRS multi-module project. The MT12 is available as either an ELRS or 4-in-1 multi-module version (see specs) and boasts 10 physical inputs, and the capability to handle either 16 or 32 channels (4-in-1 version only). The ELRS (ExpressLRS) version is designed to provide a reliable long-range, ultra-fast response, super low latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm. Each version is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

Kompatibel mit Futuba Fasst Sendern die Corona R14FA bietet eine kostengünstige Alternative für Futaba Radio-Nutzer.

Specs:
Betriebsstrom:
70mA @ FASST 7-Kanal-Modus normal und 110 mA max,
80mA @ FASST Multi-Channel-Modus normal und 110 mA max
Betriebsspannung: 4,0 ~ 10V
Latenz:
7MS für High-Speed-PPM (HS), 14ms für niedrige Geschwindigkeit PPM (LS) @ FASST Multi-Channel-Modus,
8ms für High-Speed-PPM (HS), 16 ms für niedrige Geschwindigkeit PPM (LS) @ FASST 7-Kanal-Modus
Empfindlichkeit: ~ -96dBm
Fail Safe: Ja
Größe: 53x37x16mm
Gewicht: 22 g
Antennenlänge: 136mm

Kompatibilität:
FUTABA FASST 2,4 GHz-Sender
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Die Turnigy TGY-i6 ist ein großer Eingangsstufe 6-Kanal-Telemetrie 2,4 GHz Computer-Sender, der solide und zuverlässige automatische Frequenzhopping Digital System (AFHDS) Spread-Spectrum-Technologie nutzt. Die Turnigy TGY-i6 hat sowohl eine schöne Qualität Look and Feel, während die Programmierung einfach zu bedienen ist. Die TGY-i6 hat auch eine beeindruckende Liste von Features und beinhaltet eine TGY-iA6 6-Kanal-Empfänger. Geeignet sowohl für Modell Heli und Flugzeug, die Turnigy TGY-i6 ist ein hervorragendes Budget Computer Radio für neue Piloten und erfahrene Piloten gleichermaßen!

Die ultraflachen Gehäuse-Design ergonomisch passt Ihre Hände zu weniger Ermüdung der Hand führt vor allem bei langen Flügen. Digital-Trimmung, hintergrundbeleuchtetes LCD-Display und eine einfache Programmierung geben dem TGY-i6 ein modernes Ambiente mit allen Funktionen, die Sie wollen. Mit einem Low-Profile-Antenne ist die TGY-i6 leicht zu lagern und keine Sorgen um sie zu brechen. Einstellbare Länge Sticks und eine Schleife für einen Halsband runden die Liste der Komfort Befestigung bietet Ihnen dieses Radio bietet. Flugmodi oder mehrere Klappenstellung Optionen hat der TGY-i6 einen 3-Stufenschalter sowie zwei einstellbare Knöpfe zum Ändern.

Erweitern Sie die Möglichkeiten Ihrer Modelle oder einfach nur wissen, was mit den optionalen Telemetrie-Empfänger und verschiedene Sensoren vor sich geht. Normalerweise würden Sie Hunderte von Dollar ausgeben, um einen Sender mit dieser Fähigkeit zu erhalten. Nicht so bei der Verfügbarkeit des TGY-i6.

Für den Preis machen die Funktionen der TGY-i6 bietet dieses eine der besten Radios verfügbar Dollar für Dollar.

Eigenschaften:
• Entry Level 6-Kanal 2,4 GHz Funk mit Telemetriefähigkeit
• Dual-Rate / Borten / Getriebe / Flap / Gyro Einstellung der Verstärkung / Flight Mode / Gas Hold / Hover Pitch Schalter
• Einfache Bedienung Programmierung & Navigationstasten
• Unterstützt Heli / Standard Flügel / Elevon / V-Leitwerk
• 20 Modellspeicher
• 8 Zeichenmodellname
• Trainer und Ladeanschlüsse
• Von hinten beleuchtete LCD-Display zeigt in Echtzeit Sender und Empfänger Spannungs
• 4-Stick-Modus wählbar
• Optionale Telemetrie-Empfänger und Sensoren einzeln erhältlich

Grund Programm Funktionen:
Dual-Rate
Sub Trim
Travel Adjust
Kanal umge
Swash Mix
Gyro-Empfindlichkeit
Gaskurve
Monitor
Pitch-Kurve
Gas Hold
Modellname
Timer

Turnigy TGY-i6 Transmitter Specs:
Frequenz: 2,4 GHz ISM - Frequenzbereich
Modulation: GFSK
Spread - Spectrum - Modus: AFHDS 2A und AFHDS
Band: 142
Anzahl der Frequenzkanäle: 20
Ausgangsleistung: <= 20dBm
Arbeitsstrom: <= 100mA
Betriebsspannung: 1.5vx 4 AA
Abmessungen: 174x89x190mm
Gewicht: 392g
Auflösung: 1024 Bit
Stick - Mode: Mode 2 (Gas links)

Turnigy iA6 Empfänger Spezifikationen:
Channel: 6
Frequenz: 2.4g ISM - Frequenzbereich
Leistung: 4,5 V ~ 6,6 V / <30mA
Netto - Gewicht: 6,4 g
Abmessungen: 40.4x21.1x7.35mm

Benötigt:
4 x AA Typ Batterie für den Einsatz

* Hinweis: Die Empfängerstrom Telemetrie Feedback ist verfügbar , um die Standard - i6 - Receiver. (- CTM01 TGY) müssen Sie die TGY-IA10-Empfänger oder die Turnigy TGY iA6B V2 gesamte Spektrum Empfänger nutzen zu können, um Telemetriesensoren wie die RPM / Speed ​​(TGY-CPD01 magnetische oder TGY-CPDO2 Optical), oder Temperatur verwenden Alle aufgelisteten Informationsfunktionen Flug Telemetrie in den unten aufgelistet sind. Wenn Sie mehr Kanäle für größere Flugzeuge benötigen, die TGY-CEV01 helfen Ihnen, von einem Kanal auf vier weitere Kanäle zu erweitern.