Fernsteueranlagen und Servos

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

The FrSky RX8R has been upgraded to the PRO version but retains all the old features. The new PRO version has increased precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. It also has improved anti-interference from the ignition system on combustion engines.

The Turnigy GT5 receiver is perfectly matched to work with the outstanding Turnigy GT5 6CH 2.4GHz AFHDS 2A Surface Radio to provide the most reliable link. Stop changing receivers from model to model and get an extra receiver now.

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

Der FLYSKY FGR4S-Empfänger verwendet das neue AFHDS3-Protokoll (automatisches Frequenzsprung-Digitalsystem der dritten Generation). Es verwendet eine interne Einzelantenne für die Zwei-Wege-Übertragung und ist kompakt und einfach zu installieren. Es kann Standard-PPM- und i-BUS-Signale ausgeben. Es ist eine großartige Ergänzung zu Ihrem FLYSKY Noble NB4 Oberflächenradio.

Walkera F210 Racing Quad - DEVO-RX713 Receiver

Teilenummer: F210-Z-25

Der OrangeRx 6-Kanal-Kompaktempfänger wurde für FPV-Renndrohnen mit Carbonrahmen entwickelt. Die extra lange Antenne ermöglicht es Ihnen, sie außerhalb des Rahmens zu verlegen, um eine größere Reichweite und eine robuste Verbindung zu Ihrem Sender zu erzielen.

Kompatibel mit Futuba Fasst Sendern die Corona R14FA bietet eine kostengünstige Alternative für Futaba Radio-Nutzer.

Specs:
Betriebsstrom:
70mA @ FASST 7-Kanal-Modus normal und 110 mA max,
80mA @ FASST Multi-Channel-Modus normal und 110 mA max
Betriebsspannung: 4,0 ~ 10V
Latenz:
7MS für High-Speed-PPM (HS), 14ms für niedrige Geschwindigkeit PPM (LS) @ FASST Multi-Channel-Modus,
8ms für High-Speed-PPM (HS), 16 ms für niedrige Geschwindigkeit PPM (LS) @ FASST 7-Kanal-Modus
Empfindlichkeit: ~ -96dBm
Fail Safe: Ja
Größe: 53x37x16mm
Gewicht: 22 g
Antennenlänge: 136mm

Kompatibilität:
FUTABA FASST 2,4 GHz-Sender
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Der RMILEC Adapter Konverterkarte ist die perfekte Lösung eine einfache Verbindung zu einem S-Bus-Empfänger zu ermöglichen. Der T4363NB18 Adapter unterstützt Stromversorgung 5V und kann zur Anpassung 12FG oder 14MZ Sender nicht nur verwendet werden, sondern können auch einzeln als Relaisstation an einem anderen Ort aufgestellt werden.

Das Board wird komplett mit Hardware einschließlich, JST Batterie-Anschlüsse, Ein- / Ausschalter, Terminals, Betriebs- und Geschäftsausstattung.

Bitte beachten Sie: Löten von Ein / Aus-Schalter und Anschlüsse erforderlich.

Specs:
Material: PCB
Gewicht: 39.65g
Maße: 90 x 115 mm

FrSky TFR6 7-Kanal 2,4 GHz Empfänger FASST Kompatibel

Kompatibilität:
FASST 2.4G: Air Systems (7CH Mode / Multi - Modus)
FrSky TF Module: TF-8M, TF-14M


Eigenschaften:
Geringes Gewicht und die geringe Größe
Zwei wählbare Fail-safe-Einstellmöglichkeiten


Technische Daten:
Anzahl der Kanäle: 7
Spannungsbereich Betrieb: 3.5V ~ 10V
Betriebstemperaturbereich: -10 ° C ~ 60 ° C
Dimension: 37 * 22 * 8mm
Gewicht: 7,8 g

Die FrSky S.BUS zu PWM-Decoder können Sie einen beliebigen Standard-Analog oder Digital-Servos mit Ihrem S.BUS kompatiblen Receiver zu verwenden. Dadurch entfällt die Notwendigkeit für den Einsatz von teuren S.BUS spezifischen Servos so dass Sie Ihre Modelle vorhandenen Servos zu verwenden.

Mit 4 programmierbare Ausgänge, können Sie unabhängig jeden Servo auf einen Kanal Ihrer Wahl zuweisen, während nur eine Eingangsleitung aus dem Receiver anschließen zu müssen. Das macht Ihre Verdrahtung viel mehr ordentlich und ermöglicht eine einfache Einrichtung von Servos, ohne die Notwendigkeit für mehrere Verlängerungskabel läuft.

Dies ist ein großartiges Gerät in Verbindung mit unserem orange 7CH und 9CH S.BUS kompatible Empfänger zu verwenden!

Eingeschlossen sind:
FrSky S.BUS zu PWM-Decoder

Specs:
Kanalausgänge: 4 programmierbare
Kanal Ouput Leitungslänge: 200 mm
Gesamtlänge: 350 mm

* Hinweis: FrSky Servo - Channel Changer erforderlich (separat erhältlich, verwandte Artikel unten) Zuordnung der Kanalausgänge zu ändern.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Der Oberflächenmikroempfänger FGr8B verwendet das automatische Frequenzsprung-Digital-System (AFHDS 3) der dritten Generation von FLYSKY und ist perfekt für die Palette der PL18-, NB4- und NB4-Lite-Sender geeignet. Es verwendet ein bidirektionales Übertragungssystem mit einer Antenne, das speziell für die Installation und Ausgabe von PWM / PPM und iBUS in Signalen entwickelt wurde.

The FTr10 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a double-antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr10 is a small, lightweight 2.4GHz receiver that will accept a wide input voltage of between 3.5~18V, has an incredible range in interference-free open areas of up to 10km, and its unique design includes i-BUS, S-BUS, PPM, PWM, and UART data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18 radio system. With all these features it is the perfect choice for drone flying, drone racing, FPV, and other long-range applications.

The FTr4 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr4 is a small, lightweight 2.4GHz receiver that will accept an input voltage of between 3.5~8.4V, has a range in interference-free open areas of up to 500m, and its unique design includes i-BUS, S-BUS, PPM, and PWM data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18, and NB4 radio systems. With all these features it is the perfect choice for drone flying, gliding, and small fixed-wing aircraft.

The Archer line of receivers has been enhanced further with the Plus Series, they include some exciting new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, they also feature ACCESS and ACCST D16 modes where the RF protocol is smart matched during the binding process. Another feature is a Black-Box function, which records basic flight details such as power and signal-related data.

The FrSky Plus SR8 receiver is designed for use in RC airplanes, it works as a traditional 8-Channel PWM Rx, but it also has a built-in 3-axis gyro and a 3-axis accelerometer sensor module. With the built-in sensors, the Plus SR8 will compensate for outside forces on the airplane and will enhance the stability making it easier and smoother to fly. The Plus SR8 supports multiple flight modes, Auto-level, Stabilisation, Hover, and Knife-Edge. Also available are several configuration methods, these include LUA, or the FrSky S.port Airlink+ combined with the Freelink App.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.