Stromversorgung und Verbrenner

Spezifikationen:
Konstanter Strom: 90A
Burst-Strom: 120A
Akku: 2-6S LiPo
BEC: 5.5V / 4A
Motortyp: Sensorlos Brushless
Kühlung: Wassergekühlt
Größe: 87 x 38 x 22mm
Gewicht: 105g

Programmierfunktionen:
Laufmodus: Vorwärts mit Bremse / Vorwärts und Rückwärts mit Bremse / Vorwärts und Rückwärts
Beschleunigung: 6% / 9% / 12%
Niederspannungsschutz: Keine / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Startmodus (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Umkehrkraft: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatisch

Hobbyking ESC Programmierkarte

Anzüge Folgende Hobbyking WSR

Hobby König 120A ESC 4A UBEC
Hobby König 80A ESC 4A SBEC
Hobby König 60A ESC 4A UBEC
Hobby König 40A ESC 4A UBEC
Hobby König 30A ESC 3A UBEC
Hobby König 20A ESC 3A UBEC

Siehe unten zugehörige Artikel.

Dieser 45A gebürstet ESC ist ein guter Ersatz für Ihr Modell Lager des ESC oder zum Setzen eines neuen gebürstetem Energiesystem im Auto oder LKW auf. Es verfügt über eine niedrige Spannungsabschaltung für den Einsatz mit LiPoly Batterien. Sein kompaktes und leichtes Design machen es ideal für den Einsatz in 1/10 Maßstab Drift- Verwendung Bürstenmotoren.

Eigenschaften:
• Niederspannungsabschaltung für die Verwendung mit Lipo-Akkus
• Kompaktes und leichtes Design
• 5.6V / 2A BEC

Specs:
Dauerstrom: 45A
Burst - Strom: 320A (10sec)
Geeignete Auto: 1/10 auf und abseits der Straße
Batterie: 2 Zelle Lipo (5-6 Zellen NI-xx)
BEC - Ausgang: 5,6 V / 2A Schalter Modus eingebaut in
Motortyp: gebürstet
Operation: Vorwärts / Bremse / Rückwärts
Dimension: 38x28x22mm
Gewicht: 40g

Der Hobbyking Red Brick ESC s gewinnen wird nicht den ersten Platz für Stil, obwohl sie oben Punkte für Einfachheit und Zuverlässigkeit stattfinden wird. Mit einer Reihe von grundlegenden Programmierfunktionen diese ESC s eine perfekte Lösung für alle auf der Suche nach einem einfachen , aber robusten Drehzahlregler.

Die Red Brick ESC s wurden mit Wärmeableitung im Mittelpunkt . mit übergroßen Aluminium Kühlkörper sind die Red Brick ESC s etwas größer als viele ESC s in ihrer Klasse, aber dieser Kompromiss in der Größe unterstützt werden sollen , die Probleme mit Überhitzung assoziiert zu beseitigen.

Eigenschaften:
• Glatte, lineare Ansprechverhalten
• Verwendet leistungsstarke, Hochleistungs-MCU
• Mehrere Selbstschutzfunktionen: abnormal Spannungseingang, Batterieschutz, über Wärmeschutz, Drosselsignalverlust
• Programmierbare über Gasknüppel (siehe Anweisungen unter "Dateien" tab)

Specs:
Konstantstrom: 70A
Max Burst Strom: 90A
Eingangsspannung: 2 ~ 7S (7,4 ~ 25,9), 6 ~ 20 NiCd / NiMH
BEC: 5V / 5 A
Abmessungen: 60x35x18mm
Gewicht: 70g
Servo Lead: JR Typ

Der Hobbyking Red Brick ESC s gewinnen wird nicht den ersten Platz für Stil, obwohl sie oben Punkte für Einfachheit und Zuverlässigkeit stattfinden wird. Mit einer Reihe von grundlegenden Programmierfunktionen diese ESC s eine perfekte Lösung für alle auf der Suche nach einem einfachen , aber robusten Drehzahlregler.

Die Red Brick ESC wurde mit Wärmeableitung im Mittelpunkt . eine übergroße Aluminium Kühlkörper mit der FETS und und individuelle Kühlkörper für die MCU der Red Brick ESC ist etwas größer als viele ESC s in seiner Klasse, aber dieser Kompromiss in der Größe unterstützt werden sollen , die Probleme mit Überhitzung assoziiert zu beseitigen.

Eigenschaften:
• Glatte, lineare Ansprechverhalten
• Verwendet leistungsstarke, Hochleistungs-MCU
• Mehrere Selbstschutzfunktionen: abnormal Spannungseingang, Batterieschutz, über Wärmeschutz, Drosselsignalverlust
• Sicherer Start, Motor wird erst ESC ausgeführt wird bewaffnet richtig

Specs.
Max Amps: 200A
Ubec: 5V / 5A
Zellen: 2 ~ 7S 7.4 ~ 25.9V Lipo
Größe: 65x40x26mm
Gewicht: 128 g

Specs:
Konstantstrom: 50A
Burst - Strom: 70A
Batterie: 2-6S Lipo
BEC: 5.5V / 4A
Motor - Typ: Sensorless Brushless
Kühlung: Wassergekühlt
Größe: 87 x 38 x 22mm
Gewicht: 105 g

Programmierfunktionen:
Betriebsmodus: Vorwärts mit Bremse / Vorwärts und rückwärts mit Bremse / Vorwärts- und Rückwärts
Beschleunigung: 6% / 9% / 12%
Niederspannungs - Schutz: Keine / 2,6V / 2,8V / 3,0V / 3,2V / 3,4V
Startmodus (Punch): Stufe 1 / Stufe 2 / Stufe 3 / Stufe 4 / Stufe 5 / Stufe 6 / Stufe 7 / Ebene 8 / Stufe 9
Reverse - Kraft: 25% / 50% / 75% / 100%
Timing: 0 ° / 5 ° / 10 ° / 15 ° / 20 ° / 25 ° / 30 ° / Automatik

35mm Durchmesser Motorhalterung - Clamp Stil für Inrunner Motor

Spec.
Durchmesser: 35mm (Passt 540 Größe Inrunner)
Länge: 41 mm
Gewicht: 16 g

Quanum MT-Serie Motoren sind Spec von DYS gebaut, gut in der Industrie für ihre Qualität und Leistung bekannt.

Die MT Linie verwendet Qualität NMB Lager, hohe Polzahlen für Drehmoment und einen reibungslosen Betrieb und alle Universal-Halterungen in ihrer gegebenen Größe standardisiert. Quanum hat die Motoren mit N42sh Magneten und .2mm Lamellen für optimale Effizienz geskilled. Das MT auch reichlich Motorkabellänge haben für einen Schnitt Installation passen, mit dem mitgelieferten Rundstecker und Rohr schrumpfen. Ein weiteres großartiges Feature ist, dass Quanum alle Motoren geskilled mit Montagematerial in verschiedenen Längen zu kommen, sowie beide Nabe und direkt angebautem Propeller-Optionen, so dass die Installation ist ein Kinderspiel.

Jeder Quanum Motor ist QC für die Balance überprüft, Wind, Leistung und mechanische Toleranz. Die DYS Marke ist bekannt für ihre BE-Serie und die neue Spezifikation gebaut MT Linie neue Wertmaßstäbe vs Performance setzen wird.

Eigenschaften:
• High Power N42sh Magnete
• Präzisions-NMB Lager
• .2mm Lamellen für optimale Effizienz
• Ausreichend auf Länge geschnitten Motorleitungen für eine saubere Installation
• Direktmontage Propeller oder Hub-Stil kompatibel
• Multi-Länge Montagematerial

Specs:
KV (RPM / V): 2000KV
Lipo - Zellen: 2-3S
Max Leistung: 84.4W
Max Amps: 7.6a
Nein Ladestrom: 0,6 / 11,1 V
Interner Widerstand: 0.98ohm
Anzahl der Pole: 14
Abmessungen (Dia.xL): 28 x 17 mm
Motorwelle: 2mm
Kardanwelle: 5mm CW Prop - Adapter
Gewicht: 33 g
Schraubenlochabstand: 16 * 19 M3
Schichtstärke: 0,2 mm
Magnete: 42SH
Draht: 18AWG
Anschluss: 3,5 - mm - Kugel

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

The pocket sized Trackstar LED program card has been specifically designed to work with the brushed Trackstar crawler ESCs. It is very easy and intuative to use and makes the programming of the Trackstar brushed ESC's a simple matter.

Volantex Ranger 1600 and Phoenix 1600 Replacement 2212-1400KV Brushless Motor.

A pair of replacement Aerostar 40A ESCs with wiring and connectors for the AVIOS KingTwin 1700.

A replacement Aerostar 3748-820KV brushless motor with mount and connectors for the AVIOS KingTwin 1700.

An excellent open carbon brush gear 540 35T motor that has been designed for, and is perfect for RC crawlers. Having the brush gear open means that maintenance, cleaning, and brush changing is a very simple task. The low 1320KV means masses of low down torque which makes it ideal for climbing steep and rough terrain at controllable low speeds.

This SH Engines R5 (Medium Cold) glow plug is perfect for .12~.36 size engines using 16~36% nitro fuels.

Custom-made propeller adapter and X motor mount for the Turnigy G90 series of brushless motors. Pack includes the mounting screws for the propeller adapter and motor mount.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

Performance Data (5S):
15x6: 796W, 45A, 3338g static thrust
15x8: 970W, 56A, 4151g static thrust
16x7: 1053W, 60A, 4259g static thrust

Performance Data (6S):
13x6.5: 896W, 42A, 3567g static thrust
13x8: 1042W, 50A, 4214g static thrust
14x7: 1170W, 56A, 4439g static thrust

A replacement 3720-900KV brushless motor with prop shaft for the H-King MX2 Extreme 30E.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Plush-32 Brushless ESC programming card is designed to make life easy. No more listening to the beeps, and guessing when to move your throttle to make changes to your ESC settings. This programming card changes settings with the press of a button, and easy-to-read LED’s let you know exactly how your ESC has been programmed. This programming card is a must for your Plush-32 series brushless ESC.

Now with the updated Rev1.1.0 firmware, this program card offers a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available for the 150A ESC). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this delay can be set from between 1 and 10mins using this program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use this programming card to program earlier versions of the Plush 32 series but only ESC's with the Rev1.1.0 firmware will show the revised functions.