Stromversorgung und Verbrenner

A replacement Motor Aerodrive SK3 F5055-500KV with X mount for the Avios Grand Tundra 2 1700mm

A replacement Aerodrive SK3 F5055-500KV brushless motor with X-mount for the Avios Extra-300 NG 1600mm.

An ACE RC Ripper 3720-1100KV brushless motor with prop shaft to upgrade your  H-King MX2 Extreme 30E.

Features:
• Precision bearing design: Equipped with high-precision bearings that effectively reduce friction and operating noise, delivering smoother rotation and enhanced overall stability.
• Steel output shaft: Features a high-strength steel shaft with excellent wear and impact resistance, ensuring dependable performance even under heavy loads.
• Anodizing process: The housing is treated with an anodized finish to improve corrosion resistance while enhancing surface texture and long-term durability.
• 16×16mm standard mounting hole pattern: Designed to meet common installation specifications, offering strong compatibility for quick and secure mounting or replacement.
• Multi-strand winding structure: Utilizes a multi-strand winding design to improve electrical conductivity and power output, resulting in more stable and consistent performance.
• 120mm 20AWG silicone wire: Comes with a flexible, heat-resistant 20AWG silicone wire that provides ample length for easier routing and long-lasting reliability.

Features:
• Precision bearing design: Equipped with high-precision bearings that effectively reduce friction and operating noise, delivering smoother rotation and enhanced overall stability.
• Steel output shaft: Features a high-strength steel shaft with excellent wear and impact resistance, ensuring dependable performance even under heavy loads.
• Anodizing process: The housing is treated with an anodized finish to improve corrosion resistance while enhancing surface texture and long-term durability.
• 16×16mm standard mounting hole pattern: Designed to meet common installation specifications, offering strong compatibility for quick and secure mounting or replacement.
• Multi-strand winding structure: Utilizes a multi-strand winding design to improve electrical conductivity and power output, resulting in more stable and consistent performance.
• 120mm 20AWG silicone wire: Comes with a flexible, heat-resistant 20AWG silicone wire that provides ample length for easier routing and long-lasting reliability.

Features:
• Precision bearing design: Equipped with high-precision bearings that effectively reduce friction and operating noise, delivering smoother rotation and enhanced overall stability.
• Steel output shaft: Features a high-strength steel shaft with excellent wear and impact resistance, ensuring dependable performance even under heavy loads.
• Anodizing process: The housing is treated with an anodized finish to improve corrosion resistance while enhancing surface texture and long-term durability.
• 16×16mm standard mounting hole pattern: Designed to meet common installation specifications, offering strong compatibility for quick and secure mounting or replacement.
• Multi-strand winding structure: Utilizes a multi-strand winding design to improve electrical conductivity and power output, resulting in more stable and consistent performance.
• 120mm 20AWG silicone wire: Comes with a flexible, heat-resistant 20AWG silicone wire that provides ample length for easier routing and long-lasting reliability.

Features:
•A brand new design with a rounded bell and stronger attachment points for increased durability.
•Fully mirror-polished finish that shines and glistens with even the smallest hint of light.
•Upgraded N52SH curved arc magnets for tighter airgap and better performance.
•EZO 9mm bearing for unparalleled smooth operation.
•16x16mm motor mounting

Features:
•A brand new design with a rounded bell and stronger attachment points for increased durability.
•Fully mirror-polished finish that shines and glistens with even the smallest hint of light.
•Upgraded N52SH curved arc magnets for tighter airgap and better performance.
•EZO 9mm bearing for unparalleled smooth operation.
•16x16mm motor mounting

Features:
•A brand new design with a rounded bell and stronger attachment points for increased durability.
•Fully mirror-polished finish that shines and glistens with even the smallest hint of light.
•Upgraded N52SH curved arc magnets for tighter airgap and better performance.
•EZO 9mm bearing for unparalleled smooth operation.
•16x16mm motor mounting

Features:
•X2807 brushless motor is the upgraded motor, 12N14P high torque motor design, which is smooth, reliable and powerful.
•The motor is characterized by support 2~6S lipo. Suitable for multicopter, RC aircraft, drone.
•Motor KV 1300KV, shaft size 4 x 14mm, motor mount M3*19, which is compatible with 6-7inch propeller.
•FPV brushless motor provides the most incredible power and thrust in the lightest weight. Give you a more satisfied experience with your model.
•Each rotor was dynamically balanced with high speed. High purity copper windings maximize efficiency, good insulation and heat resistance.

Features:
•X2807 brushless motor is the upgraded motor, 12N14P high torque motor design, which is smooth, reliable and powerful.
•The motor is characterized by support 2~6S lipo. Suitable for multicopter, RC aircraft, drone.
•Motor KV 1700KV, shaft size 4 x 14mm, motor mount M3*19, which is compatible with 6-7inch propeller.
•FPV brushless motor provides the most incredible power and thrust in the lightest weight. Give you a more satisfied experience with your model.
•Each rotor was dynamically balanced with high speed. High purity copper windings maximize efficiency, good insulation and heat resistance.

DYS D2225/13 2000KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 2000kv
Max current: 11A
Max power: 122W
Internal resistance: 0.143 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x4/6x5

DYS D2225/19 1350KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1350kv
Max current: 8.2A
Max power: 105W
Internal resistance: 0.203 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x5/7x3

A replacement 5020-550KV brushless motor for the H-King Yak-11 Steadfast Single-Seat Racer.

Quanum MT-Serie Motoren sind Spec von DYS gebaut, gut in der Industrie für ihre Qualität und Leistung bekannt.

Die MT Linie verwendet Qualität NMB Lager, hohe Polzahlen für Drehmoment und einen reibungslosen Betrieb und alle Universal-Halterungen in ihrer gegebenen Größe standardisiert. Quanum hat die Motoren mit N42sh Magneten und .2mm Lamellen für optimale Effizienz geskilled. Das MT auch reichlich Motorkabellänge haben für einen Schnitt Installation passen, mit dem mitgelieferten Rundstecker und Rohr schrumpfen. Ein weiteres großartiges Feature ist, dass Quanum alle Motoren geskilled mit Montagematerial in verschiedenen Längen zu kommen, sowie beide Nabe und direkt angebautem Propeller-Optionen, so dass die Installation ist ein Kinderspiel.

Jeder Quanum Motor ist QC für die Balance überprüft, Wind, Leistung und mechanische Toleranz. Die DYS Marke ist bekannt für ihre BE-Serie und die neue Spezifikation gebaut MT Linie neue Wertmaßstäbe vs Performance setzen wird.

Eigenschaften:
• High Power N42sh Magnete
• Präzisions-NMB Lager
• .2mm Lamellen für optimale Effizienz
• Ausreichend auf Länge geschnitten Motorleitungen für eine saubere Installation
• Direktmontage Propeller oder Hub-Stil kompatibel
• Multi-Länge Montagematerial

Specs:
KV (RPM / V): 2000KV
Lipo - Zellen: 2-3S
Max Leistung: 84.4W
Max Amps: 7.6a
Nein Ladestrom: 0,6 / 11,1 V
Interner Widerstand: 0.98ohm
Anzahl der Pole: 14
Abmessungen (Dia.xL): 28 x 17 mm
Motorwelle: 2mm
Kardanwelle: 5mm CW Prop - Adapter
Gewicht: 33 g
Schraubenlochabstand: 16 * 19 M3
Schichtstärke: 0,2 mm
Magnete: 42SH
Draht: 18AWG
Anschluss: 3,5 - mm - Kugel

B36-60-06L Brushless Inrunner 4000kv

KV: 4000
Max Strom: 100A
Max Leistung: 1300W
Ruhestrom: 6.2A
Widerstand: 0.005Ω
Schaft: Φ5.0mm
Gewicht: 260g
Empfohlene ESC: 120A
Zellenzahl: 2-3SLipo
Bolzenlöcher Abstand: 25 mm
Bolzengewinde: M3.0 * 4
Gold - Anschluss: Φ4.0

Die Turnigy Track Sensored Brushless Motoren bieten hervorragende Leistung zu einem unglaublichen Preis!

eine Qualität CNC-Motor können als hochreine Kupferwicklungen und starken Magneten gesinterten Neodym-Handaufzug, finden Sie nicht einen besseren Preis Motor dieser anderswo Kaliber! Der integrierte Sensor sorgt für einen reibungslosen Start-ups und Beschleunigung.

Die Track Brushless-Motoren machen ein großes Upgrade für 1/8-Kurzplatz LKW, Monster Trucks, Buggys oder irgendetwas anderes, das 42 die Größe von Motoren verwendet.

Eigenschaften:
• Sensor-Based für Hervorragendes Drehmoment und Low-Speed ​​Fahrbarkeit
• Kompatibel mit allen Sensored / Sensorless ESC
• CNC-Aluminiummotor
• Hochreiner Kupfer Windings
• Abnehmbare / Austauschbare Rotor
• Leistungsstarke gesinterter Neodym-Magnet
• Präzisions-Engineered für maximale Energieumwandlung

* Hinweis: Sensor - Kabel im Lieferumfang

Specs:
Größe: 4270
RPM / v: 1900kv
Polen: 4
Sensored: Ja (Standard 6 - Pin - Geschirr)
Max Spannung: 15V (4S)
Max Strom: 120A
Max Watt: 1800W
Widerstand: 0.012ohm
Schachtgröße: 5mm
Kann Durchmesser: 42mm
Kann Länge: 70 mm
Gewicht: 329g