$10 - $49.99

A replacement wing set with ailerons for the red and white XFLY 850mm Partenavia P68 Twin.

A replacement fuselage for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of wings for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of horizontal stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the grey 750mm XFLY Sukhoi Su-27 Flanker.

A replacement pair of vertical stabilizers for the blue 750mm XFLY Sukhoi Su-27 Flanker.

A replacement battery hatch and cockpit with a pilot for the grey 750mm XFLY Sukhoi Su-27 Flanker.

Suche nach soliden, ein hohes Drehmoment Servos für Ihre 1 / 5. Skala Auto, LKW oder Buggy? Die Track TS-500HD Servos sind genau das Richtige! Die Servos haben einen Drehmomentbereich von 27,3 - 32 kg, während noch das Beibehalten der guten Arbeitsgeschwindigkeiten über seine 4,8 - 7,4 V Eingangsbereich. Die Temperatur des Servo wird durch seine schön gefrästen Kühlkörper Gehäuse gehalten, die einen kühlen rot eloxierte Oberfläche hat.

Die Track TS500HD Servos sind eine ausgezeichnete Wahl für everday Bashing und kann sogar die härtesten Offroad-Pisten in fast allen Rennbedingungen umgehen!

Servos werden komplett mit Ruderhörner und alle notwendigen Einbauten.

Specs:
Betriebsspannung: 4,8 ~ 7,4 V
Gewicht: 188 g
Maße: 68 x 60 x 30 mm
Drehmoment: 27.3kg (4.8V) 30.5kg (6,0 V) 32kg (7,4V)
Geschwindigkeit: 0.22sec / 60deg (4.8V) 0.20sec / 60deg (6,0 V) 0,19 sec / 60deg (7,4V)
Motor: Brushed DC - Motor
Räderwerk : Metall

Ersatzteile - RC Adapter Multiplex für Scherrer Rx700LR Long Range UHF-System

Rx700NR is a small and very light weight receiver with 9 channels that has a range of up to 20km! It also has an optimized input filter which will prevent interference from strong 2.4 GHz video systems.

The Rx700NR will work with any Scherrer long range transmitter and will provide you with a solid and safe signal for your flights. The antenna is mounted directly on the board and with a total weight of only 8 grams this receiver is perfect for UAVs where the focus is on weight and longer flight times.

Features:
• Up to 20km range
• External firmware upgrade port
• Running LED
• Completely new software
• Selectable PPM/PWM
• Sequential failsafe

Specs:
Board Dimensions: 26 x 53mm
Weight: 8g
Number of channels: 9
Output: PPM output 
Rssi output: 0.5 to 3.3V from min to mix
Supply voltage: 4 -10 V
Supply current RX: 18mA at 5V
System: Wideband frequency hopping 
Band: 433 and 440 MHz 
User firmware upgradeable: Yes
Wide user temperature range: -40C to +70C ambient

Die Turnigy MX-Serie von Servos für ihre Qualität und Zuverlässigkeit sind reknown. Jeder Servo ist mit Befestigungsschrauben, Ösen und einer Vielzahl von Servoarmen geliefert.

Specs:
Spannung: 4,8 ~ 6V
Drehmoment: 2,5 ~ 3,0 kg / cm
Geschwindigkeit: 0,14 ~ 0.12sec / 60 °
Gewicht: 17 g
Abmessungen: 28.2x12.8x27mm
Gears: Kunststoff
Lager: Single BB
Motor: Cored
Typ: Digital
Servo Stecker: JR Typ
Servo Leitungslänge: 260 mm

Die HobbyKing® ™ GT2E ist eine erschwingliche, 2-Kanal 2,4 GHz Boden Radio, mit einstellbarer Lenkung Dual-Rate-und Servo-Umkehr, es ist ein sehr einfaches Setup für Ihr Auto oder Boot zu machen. Die automatische Frequenz digitales System-Hopping bietet eine starke, zuverlässige 2,4-GHz-Signal, so sicher sein, Sie werden immer in der Steuerung. Im Paket enthalten ist ein 3-Kanal Mini-Empfänger, der in den meisten Fahrzeugen passen. Der ergonomische Griff der trasnsmitter wird in die Hände auch nach langen Track-Sessions ein gutes Gefühl.

Eigenschaften:
• Zuverlässig, störungsfreie 2,4 GHz AFHDS Signalbetrieb
• 2-Kanal-Betrieb
• Verwenden Sie nur 4xAA Batterien für Sender
• Einstellbarer Lenk Dual-Rate
• Einfache Bindung Verfahren

Transmitter Specs:
RF Power: 20dBm (100mW) max
Modulation: GFSK
Systemtyp: AFHDS 2A
Empfindlichkeit: 1024
Low Voltage Warnung: Ja
DSC - Port: 3,5 mm
Ladebuchse: Ja (3,5 Zoll)
Leistung: 4 x AA, 6 V DC
Gewicht: 241g

Empfänger Spezifikationen:
HF - Empfänger - Empfindlichkeit: -105dBm
Modulation: GFSK
Systemtyp: AFHDS 2A
Empfindlichkeit: 1024
Failsafe: Ja (Kanal 2)
Stromanschluss: Ja (VCC)
Leistung: 4,5 ~ 6,5 VDC
Gewicht: 5g
Antennenlänge: 26mm
Abmessungen: 37x22x12mm

Eingeschlossen sind:
HK-GT2E Sender
HK-GT2E 3CH Empfänger
Antennenröhre
bind Stecker
Benutzerhandbuch

Der HobbyKing GT2B verfügt über 3-Kanal-Betrieb, austauschbare Handgriffe, einstellbare Dual-Rate-Lenkung, Servo-Reversierung und einen wiederaufladbaren Lithium-Ionen-Akku, der den Kauf teurer AA-Batterien überflüssig macht. Der Li-Ion-Akku macht diesen Sender auch viel leichter, was dem Benutzer ein tolles Gefühl bei der Verwendung gibt. Kein Herumschleppen eines schweren Senders mit 8 x AA-Batterien mehr!

The Orange OpenLRSng is an open-source receiver that can be programmed to use your choice of protocol and any channel in the 915MHz range. It is a fully user-customizable RF receiver that can even be programmed to utilize additional features such as telemetry, operative remote control via sticks (cPPM ready), and mission control.

Digitale Brushless Servos, die ultimative Präzision und Haltekraft. Track von Turnigy kennt diese Bedeutung durch eine Reihe von digitalen Brushless Servos für 1/8 zu bringen und 1/10-Skala Fahrzeuganwendungen. Diese robusten Servos verfügen Legierung Fällen mit Doppelkugellager Abtriebswellen, und eine Titanräderwerk.

Bereitzustellen, um die beste und effizienteste Leistungs diese Servos Design sind auf einer Vielzahl von Spannungen von 6,0 bis 7,4 V zu betreiben. In Tests konnten sie den Missbrauch von On-Road und Off-Road-Rennen zu widerstehen und immer noch mehr zurückkommen.

Der TS-910 ist ein Standard-Größe Servo perfekt für 1/8 Skala Truggy und Monster-Truck-Anwendungen. Wir sind mehrere verschiedene Servohebel und ein komplettes Montage-Hardware-Paket.

Specs:
Gewicht: 66g
Größe: 39mmx19mmx38.5mm
Drehmoment: 25.8kg.cm (6,0V) - 30.6kg.cm (7,4V)
Geschwindigkeit: 0.16sec / 60deg (6,0V) - 0,14 sec / 60deg (7,4V)
Spannung: 6.0 ~ 7.4V
Motor: Japan Brushless
Typ: Digital
Räderwerk : Titan
Kugellager: N2 Kugellager
Leitungslänge: 300 mm
Stecker: JR / Futaba

Wenn Sie sich für das ultimative Lenkservo für 1/8 Skala Truggy suchen, haben wir genau das Richtige!

Der Track TS-621MG ist eine Standard-Größe digitalen Servo ein Metall geartrain, kernlosen Motor und einen schnellen 0.14sec Laufzeit kennzeichnet. Hinzu kommt, dass es eine ausgezeichnete Leistung ist und ausgetrickst aussieht, und Sie haben eine hervorragende Lenkservo für den Preis!

Specs:
Gewicht: 57 g
Größe: 39.0mmx19.5mmx38.5mm
Drehmoment: 16.8kg.cm (4,8V) ~ 21.2kg.cm (6,0V)
Geschwindigkeit: 0.16sec / 60deg (4,8V) ~ 0.14sec / 60deg (6,0V)
Spannung: 4.8 ~ 6.0V
Typ: Digital Standard
Motor: Coreless Motor
Räderwerk : Legierung Gears
Kugellager: Doppel Japan NSK Kugellager
Leitungslänge: 255mm
Stecker: JR / Futaba

There's a lot to be said for the simple things in life, and with RC equipment becoming ever more flexible it's a refreshing change to find a simple, 4 channel radio that dispenses with the need for programming before you can use it.

The Turnigy TGY-i4X AFHDS/2A does exactly that and is a great entry level 4-channel telemetry 2.4ghz transmitter that can be switched between 1st and 2nd generation Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology. The Turnigy TGY-i4X has a nice quality look and feel, while the programming is limited to one-switch V-tail/elevon mixing and servo reversing only. The transmitter is capable of being upgraded to up to 10 channels, see manual for details.

An ergonomically designed, ultra slim case design fits comfortably in your hands, an advantage during long flights. Digital trims and easy to read battery indicator LEDs give the TGY-i4X a modern feel with all the essential features you need. With a low profile antenna, the TGY-i4X is easy to transport and store. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers.

The TGY-i4X comes with the TGY-i4X 4-channel receiver and is a superb budget radio for both new and experienced pilots alike!

Features:
• Entry level 4 channel 2.4ghz radio
• One switch V-tail/elevon mixer
• Easy to use servo reversing switches
• Standard Wing/Elevon/V-Tail
• Trainer port
• Simple LED battery indicator
• 1-Button binding

Transmitter Specs:
Channels: 4 (Expandable to 10)
Frequency: 2.40~2.48GHz
Bandwidth: 500KHz
DSC Port: PS2
Output: PPM Charger
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142 RF
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 6V (4 x AA batteries)
Range: 100~300m
Dimensions: 174 x 89 x 190mm
Weight: 335g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Receiver Specs:
Channel: 4
Frequency: 2.40~2.48GHz
Power: 4.5V~6.6V/<30ma
Weight: 13g
Antenna length: 26mm
Dimensions: 45 x 23 x 9mm

Included:
Turnigy TGY-i4X transmitter
Turnigy TGY-i4X receiver
Bind plug
Manual

Requires:
4 x AA batteries

Instruction Manual is available under the "Files" tab.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Der Oberflächenmikroempfänger FGr8B verwendet das automatische Frequenzsprung-Digital-System (AFHDS 3) der dritten Generation von FLYSKY und ist perfekt für die Palette der PL18-, NB4- und NB4-Lite-Sender geeignet. Es verwendet ein bidirektionales Übertragungssystem mit einer Antenne, das speziell für die Installation und Ausgabe von PWM / PPM und iBUS in Signalen entwickelt wurde.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

A replacement set of landing gear with wheels for the 750mm XFLY Sukhoi Su-27 Flanker.

This optional CNC main gear set with oleo, wheels, and shock absorption for the XFLY Sukhoi Su-27 Flanker will make for smoother take-offs and landings, they also look great as well.

The Rhino VE40A electronic speed controller with 32-bit MCU has been designed primarily for competitive 1/10, and 1/12 RC rock crawlers, but it is also very suitable for other types of cars and trucks. The preloaded AM32 custom firmware is optimized for RC rock crawlers, but the firmware can be configured for other applications by using the DYS USB-Link (not supplied).

A replacement battery hatch and cockpit with pilot for the 1000mm XFLY A-10 Thunderbolt II Twin.