Fahrzeuge

Rear sway bar set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy

This is an incredibly well made upgrade kit for the Orlando OH35A01 and will not only improve the strength of your drive train but, more importantly with scale crawlers, will look awesome at the same time.

WL Toys K989 1:28 Scale Rally Car - Replacement Body Pins K989-11 (10pc)

WL Toys K989 1:28 Scale Rally Car - Replacement Rear Body Mount K989-51 (2pc)

WL Toys K989 1:28 Scale Rally Car - Replacement Drive Reduction Gears K989-31

WL Toys K989 1:28 Scale Rally Car - Replacement Rally Tires K989-53 (4pc)

WL Toys K989 1:28 Scale Rally Car - Replacement Rear Hubs K989-33

WL Toys K989 1:28 Scale Rally Car - Replacement Steering knuckles K989-34

WL Toys K989 1:28 Scale Rally Car -  Replacement Front Axle (2pc)

WL Toys K989 1:28 Scale Rally Car - Replacement Steering Linkage K989-41 (2pc)

Turnigy-Batterien sind weltweit für ihre Leistung und ihren Preis bekannt. Daher ist es für uns keine Überraschung, dass sie die erste Wahl für Kenner sind.

Turnigy Hardcase-Batterien halten dem Stress und Schock stand, der mit den strafenden Extremen von Straßen- oder Offroad-Rennen verbunden ist. Unabhängig von der Art des Fahrens, die Sie bevorzugen, sind Turnigy Hardcase-Packs die ideale Wahl.

Turnigy Hardcase LiPo-Packs verwenden IR-angepasste Zellen, liefern die Nennkapazität und arbeiten, wenn Sie Gas geben. Sie werden einfach nirgendwo ein günstigeres Hardcase-Paket finden!

Have you crashed recently? Dust yourself off and keep racing with these quality spare parts. Designed for the 1/28 Mini-Q On Road Car, this racing car shell is made with hardy plastic and will have you back on the roads in no time.

Designed for the 1/28 Mini-Q DIY On Road Car, these replacement chassis parts are made with quality materials and will have you back on the roads in no time.

Tuned specifically for for use with 3.7v LiPo

Das Turnigy GT5 Surface Radio wird mit dem stets zuverlässigen 6-Kanal 2.4 GHz AFHDS 2A (Automatic Frequency Hopping Digital System) geliefert, um die zuverlässigste Verbindung zwischen Radio und RC-Car oder RC-Boot zu bieten. In diesem Paket enthalten ist der Turnigy GT5 Receiver mit einem eingebauten Gyro für eine fantastische Driftkontrolle. Das ergonomische Design liegt gut in der Hand.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

The Turnigy TrackStar range of 1/10th Brushed Motors is ideal for those that require a no-nonsense motor that will power your vehicle in any conditions. These motors are an ideal solution for backyard bashers or anyone wanting to cross rivers or travel in a wet environment.

TrackStar 30mm High-Speed Cooling Fan

Aluminium Rear Bumper Type A - OH35A01 for the 1/35 Rock Crawler.

Keep the adventure going with high-quality spare parts for your TR-4. The replacement front C hubs are made of aluminum and are an excellent spare part to have handy.

This Mini Vibrating Cleaning set is perfect for removing grease, dust, and other contaminants from small objects. Ideal for bearings, gears, springs, shafts, jewelry, watch parts, and even small precision instruments.

This bearing detergent is the perfect partner to Mini Vibrating Cleaning Unit. Mix this detergent with water for removing grease, dust and other contaminants from bearings, gears, watch parts, jewelry and lots of other small intricate parts.

The QUICRUN 880 Dual ESC is a durable, highly reliable waterproof electronic speed controller that has been designed for twin brushed motors in 1/10 and 1/8th scale vehicles. The HobbyWing patented copper heat conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the aluminum heatsink for faster and greater heat dissipation.

Der FLYSKY FGR4S-Empfänger verwendet das neue AFHDS3-Protokoll (automatisches Frequenzsprung-Digitalsystem der dritten Generation). Es verwendet eine interne Einzelantenne für die Zwei-Wege-Übertragung und ist kompakt und einfach zu installieren. Es kann Standard-PPM- und i-BUS-Signale ausgeben. Es ist eine großartige Ergänzung zu Ihrem FLYSKY Noble NB4 Oberflächenradio.

Keep your car running smoothly with these high-quality spare parts designed specifically for the Blaze 1/10 Scale Cars. These 6-degree caster blocks work with the DCJ conversion as an option for different caster settings.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.