Akkus / Ladegeräte

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

Use this adapter lead to charge batteries with 4MM Bullet Connector plugs, even those with reversed polarity Connectors using the supplied adaptors.

A Parallel Harness is a common way to double the capacity rating (mAh) while keeping the same voltage.

XT30 Male Connector w/24AWG Silicone Wire 55mm (1pc).

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

One end has an XT60 male connector and the other end has a Micro Losi male connector.

4mm Solder Type Banana/Charge Plug (2 pairs).

XT60 Male to 2 x DC Jack Plug Connectors 220mm (2pcs)

Specs:
Connector 1: XT60 Male
Connector 2: 2 x DC Jack Plug
Length: 220mm
Weight: 16.7g each
Quantity: 2pcs

These are good quality balance lead extensions with a 5S JST-XH male connector on one end and a female on the other.

Der SKYRC IMAX B6 war schon immer ein beliebtes fortschrittliches Ladegerät, das in der Lage ist, LiIon, LiPo, LiFe (A123), NiCd, NiMH und Pb-Akkus zu laden, zu balancieren und zu entladen, mit der V2 ist es jetzt noch besser geworden. Er ist mikroprozessorgesteuert wie die besten Ladegeräte und balanciert die einzelnen Zellen in Ihren Li-XX-Akkus und vieles mehr. Das B6 V2 ist ein reines DC-Eingangsladegerät, es benötigt einen DC-Eingang zwischen 11~18V, der entweder von einer Batterie oder einem AC-Netzteil gespeist werden kann.

XT30U Silicone Charge Lead with 4mm Banana Plugs.

XT60 Male w/12AWG 100mm Silicone Wire (5pcs).

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This compact adapter is perfect to convert an HXT3.5mm equipped battery to an XT60, or an XT60 charge lead to HXT3.5mm.

Specs:
Connector 1: HXT3.5mm
Connector 2: XT60 female
Weight: 15g (each)
Quantity: 2pcs

A compact battery adapter to convert a T-Connector battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC5 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC3 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT60 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT90 battery lead to a TR output, compatible with similar types of connectors.

Das ToolkitRC M7AC ist ein vielseitiges Multifunktionsgerät, das Funktionen wie Laden, Entladen, Zyklieren, Signaltest/Signalquelle (PWM/PPM/SBUS), Multimeter, intelligentes Aufladen von Drohnenakkus in Verbraucherqualität, anpassbare mehrsprachige Sprachmeldungen und vieles mehr bietet. Der M7AC ist leicht und kompakt und verfügt über ein eingebautes Netzteil, so dass er mit einer 100~240V AC Netzstromquelle betrieben werden kann. Er kann auch mit 7-28 V Gleichstrom betrieben werden, was ideal für das Aufladen auf dem Flugplatz, der Rennstrecke oder dem Bootssee ist.

Das ToolkitRC M4 Pocket ist ein ultrakompaktes Balance-Ladegerät in Handflächengröße, das trotz seiner geringen Größe einen 1~4S-Akku mit bis zu 80W aufladen kann. Es ist einfach und intuitiv zu bedienen, verfügt über einen gut lesbaren Weitwinkel-IPS-Vollfarb-LCD-Bildschirm mit 1,54 Zoll x 240 x 240 Pixel und eine einfache, einzelne Programmiertaste.