Akkus / Ladegeräte

One end has an XT60 male connector and the other end has a Micro Losi male connector.

4mm Solder Type Banana/Charge Plug (2 pairs).

XT60 Male to 2 x DC Jack Plug Connectors 220mm (2pcs)

Specs:
Connector 1: XT60 Male
Connector 2: 2 x DC Jack Plug
Length: 220mm
Weight: 16.7g each
Quantity: 2pcs

These are good quality balance lead extensions with a 5S JST-XH male connector on one end and a female on the other.

Der SKYRC IMAX B6 war schon immer ein beliebtes fortschrittliches Ladegerät, das in der Lage ist, LiIon, LiPo, LiFe (A123), NiCd, NiMH und Pb-Akkus zu laden, zu balancieren und zu entladen, mit der V2 ist es jetzt noch besser geworden. Er ist mikroprozessorgesteuert wie die besten Ladegeräte und balanciert die einzelnen Zellen in Ihren Li-XX-Akkus und vieles mehr. Das B6 V2 ist ein reines DC-Eingangsladegerät, es benötigt einen DC-Eingang zwischen 11~18V, der entweder von einer Batterie oder einem AC-Netzteil gespeist werden kann.

XT30U Silicone Charge Lead with 4mm Banana Plugs.

XT60 Male w/12AWG 100mm Silicone Wire (5pcs).

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This compact adapter is perfect to convert an HXT3.5mm equipped battery to an XT60, or an XT60 charge lead to HXT3.5mm.

Specs:
Connector 1: HXT3.5mm
Connector 2: XT60 female
Weight: 15g (each)
Quantity: 2pcs

A compact battery adapter to convert a T-Connector battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC5 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC3 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT60 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT90 battery lead to a TR output, compatible with similar types of connectors.

Das ToolkitRC M7AC ist ein vielseitiges Multifunktionsgerät, das Funktionen wie Laden, Entladen, Zyklieren, Signaltest/Signalquelle (PWM/PPM/SBUS), Multimeter, intelligentes Aufladen von Drohnenakkus in Verbraucherqualität, anpassbare mehrsprachige Sprachmeldungen und vieles mehr bietet. Der M7AC ist leicht und kompakt und verfügt über ein eingebautes Netzteil, so dass er mit einer 100~240V AC Netzstromquelle betrieben werden kann. Er kann auch mit 7-28 V Gleichstrom betrieben werden, was ideal für das Aufladen auf dem Flugplatz, der Rennstrecke oder dem Bootssee ist.

Das ToolkitRC M4 Pocket ist ein ultrakompaktes Balance-Ladegerät in Handflächengröße, das trotz seiner geringen Größe einen 1~4S-Akku mit bis zu 80W aufladen kann. Es ist einfach und intuitiv zu bedienen, verfügt über einen gut lesbaren Weitwinkel-IPS-Vollfarb-LCD-Bildschirm mit 1,54 Zoll x 240 x 240 Pixel und eine einfache, einzelne Programmiertaste.

Der ToolkitRC MC8 Advanced Multifunction Battery Checker ist vollgepackt mit Funktionen und verfügt über einen großen Farbbildschirm für den vollständigen Batteriestatus auf einen Blick. Dieser multifunktionale Prüfer kann den Status von 1-Zellen- bis 8-Zellen-Akkus prüfen, verfügt über einen Batterieausgleich auf Knopfdruck und kann als Empfängerprüfer Ausgangssignale für PWM, PPM oder SBUS lesen. Der PWM-Ausgang kann auch als Servotester verwendet werden, und der MC8 kann sogar Ihre Mobilgeräte über seinen USB-C-20-W-Ausgang schnell aufladen.

Das ToolkitRC M6DAC ist ein vielseitiges Doppelbatterieladegerät, das Funktionen wie Laden, synchrones Laden, Entladen, Radfahren, intelligentes Laden von Drohnenbatterien für Verbraucher integriert und über eine mehrsprachige Benutzeroberfläche verfügt. Der M6DAC verfügt über ein eingebautes 200-W-Netzteil, mit dem er über eine Netzstromquelle mit 100 bis 240V Wechselstrom betrieben werden kann. Es kann auch mit einer 7-28-V-Gleichstromversorgung betrieben werden, die sich perfekt zum Aufladen auf dem Flugfeld, der Rennstrecke oder dem Bootssee eignet.

Das ToolkitRC M4AC ist ein einfach zu bedienendes, sachliches und unkompliziertes Balance-Ladegerät für LiPo-, LiFe- und Li-Ion-Akkus. Es ist nur ein netzbetriebenes Ladegerät (100~240V) und kann 1~4S-Akkupacks mit bis zu 2,5A und maximal 30W laden.

Das Adapterkabel ToolkitRC SC100 dient zur Stromversorgung von Akkuladegeräten mit geringer Wattleistung oder anderen Geräten mit einem XT60-Eingangsanschluss von einem USB-C-Netzteil mit bis zu 100 W.

Spezifikationen:
Typ: ToolkitRC SC100 XT60~USB-C-Protokollkabel
Eingang: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
Ausgangsspannung: 5~20 V max
Ausgangsstrom: 5A max
Ausgangsanschluss: XT60
Länge: 50cm
Gewicht: 35 g

Turnigy has moved into the next decade of the 21st century with the T240 touchscreen charger. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries. It also has battery management, security settings, and operation data memory, and can charge two different battery chemistries simultaneously. Programming is very straightforward by using the 3.2-inch color LCD touchscreen display.

Tired of being stuck with the basic USB charger for your TRX4M batteries? Well, we've got just the solution! This handy little charge lead converts your TRX4M battery plug to a JST and 2S balance plug for use with standard, hobby-grade battery chargers. Now you can not only charge with ease but also properly store your batteries by utilizing your charger's storage mode.

Tired of being stuck with the basic USB charger for your TRX4M batteries? Well, we've got just the solution! This handy little charge lead converts your TRX4M battery plug to an XT60 and 2S balance plug for use with standard, hobby-grade battery chargers. Now you can not only charge with ease but also properly store your batteries by utilizing your charger's storage mode. 

For several years we have been selling the very popular Bat-Safe charging box, it has been so successful that we can now offer a smaller, more compact version. These double-walled, insulated boxes have been designed by engineers who know how dangerous a LiPo battery fire inside a home can be. The guys at Bat-Safe are RC enthusiasts and came up with a safe and awesome solution to store, transport, and most importantly charge your Lipo batteries. With a double steel wall, fiberglass, and steel wool filter to capture the smoke and soot, they combine to control the intense heat and arrest the flames if ever you are unlucky enough to have a problem whilst charging.

The ToolkitRC M8D is a powerful, versatile, touch-screen unit that integrates functions such as charging, discharging, and balance management for a range of battery types. The M8D is also a dual charger, so it can charge 2 batteries at a time, and these can be different voltages and chemistries. The M8D is a DC unit only, so requires an input voltage of 10~49V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can also be connected to a suitable mains power supply.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.