Schnäppchen Kasten

The Foxeer Predator 5 series of FPV cameras are the perfect companion to the Foxeer F722 V2 standard and mini flight controllers. The Predator has a 150° field of view, super WDR function for improved contrast in different light conditions, 4-millisecond latency for virtually instant feedback, all of which make it perfect for FPV racing.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Ein Ersatz Spornrad komplett mit Spornrad und Befestigungsschrauben für den H-King Swiss J-3 Piper Cub.

Bitte beachten: Diese Teile passen zu früheren Versionen des H-King 1400mm J-3 Cub, die Farben sind natürlich anders.

Ein Ersatzflügel-Set für den H-King Reno Aces P-51 "Galloping Ghost". Beinhaltet die Querruderservoabdeckungen, Stößelstangen und werkseitig angebrachte Aufkleber

Ein Ersatz-Rumpfset für die H-King Reno Aces P-51 "Galloping Ghost", inklusive werkseitig angebrachter Aufkleber. Bitte beachten Sie, dass das Oberdeck, die Kabinenhaube und die Motorhaube nicht mit diesem Rumpfset geliefert werden.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

Ein Ersatzlukendeckel mit goldenem Baldachin für den H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement horizontal stabilizer with elevator for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement vertical stabilizer with rudder, mounting screw, and factory-applied decals for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement hatch cover that is supplied with a clear, and gold canopy for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement 8x6 propeller for the H-King Reno Aces P-51 "Galloping Ghost".

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This next-generation bidirectional cross weave glass fiber reinforcing tape has a transparent "PET" substrate which provides a high longitudinal tensile strength, and is transverse tear resistance, in short, it is extremely strong. The other outstanding property it has is the adhesive, it is super sticky, but allows for positioning. Once you are satisfied with the position of the tape gently apply more pressure and the strength of the bond increases. This strong, pressure-sensitive rubber-based adhesive will also increase its strength over the next 24hrs as it "cures" to form a permanent, very strong bond. Another characteristic of this tape is that it will retain its strength in high and low temperatures.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

This is a replacement pre-painted horizontal stabilizer for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted vertical stabilizer for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted vertical stabilizer for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pre-painted canopy and battery hatch for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted canopy and battery hatch for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Red Reno Racer.

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Commemorative Russian WW2 Warbird.

A replacement wing joiner/main spar for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

This is a replacement decal set for the H-King Yak-11 Red Reno Racer.

Du willst noch mehr Speed und Power für deinen H-King Reno Aces P-51 "Galloping Ghost"? Dann rüsten Sie auf diesen optionalen leistungsstarken bürstenlosen Pro 3108-1160KV auf und verwandeln Sie ihn in eine ballistische Rakete mit unbegrenzter vertikaler Leistung. Es besteht keine Notwendigkeit, den mitgelieferten Propeller oder Regler zu ändern, beides ist mit diesem Upgrade in Ordnung.

A strong, flexible, transparent fuel tank that is suitable for most types of RC models. The fuel tank includes a machined metal cap with fuel feed, a flexible fuel feed pipe with clunk weight, and 2 factory-installed machined metal 90° hose attachment nipples. One of these is for filling the tank, and the other is used for pressure or venting. Each fuel tank comes with a Turnigy sticker that includes the capacity of the tank, this can be attached to the tank in a convenient position to remind you of its size. The fuel tank is suitable for use with both gas and nitro fuels.

A replacement crankshaft set for the Turnigy TP10 10cc gas engine. This set includes the crankshaft, conrod, prop-driver woodruff key, and prop nut.

A replacement crankcase set for the Turnigy TP10 10cc gas engine, this set includes the crankcase, gasket, and 2 x screws.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.