Schnäppchen Kasten

A replacement fuselage for the AVIOS KingTwin 1700 with factory-applied decals. Please note that the cockpit/hatch cover is not included with this item.

A replacement wing center section for the AVIOS KingTwin 1700 with factory-applied decals, and wiring. 

A replacement left-hand wing panel for the AVIOS KingTwin 1700 with factory-applied decals, aileron, spars, and latching catch.

A replacement pair of horizontal stabilizers for the AVIOS KingTwin 1700 with factory-applied decals, elevators, and spars.

A complete set of replacement servoless retracts with dummy oleos and wheels for the AVIOS KingTwin 1700.

Ein Ersatzaufkleber für das 1500 mm Avios BushMule V2.

The Aomway 5.8GHz circular polarized patch antenna is a lightweight directional antenna that is perfect for use with FPV goggles. It operates in the 5705~5945Mhz frequency bandwidth with an operating angle of 35° and has an incredible range. Flights of multi kilometers are possible even on CE legal 25mW, but with 600mW systems, the distance can be unbelievable.

A replacement fiberglass cowl for the H-King 1:3.8 De Havilland DH82A Tiger Moth.

A replacement fiberglass cowl for the H-King 1:3 Nieuport 28 WW1 Fighter.

A replacement left-wing set with decals for your H-King Skipper All Terrain 700mm airplane.

Replacement right-wing set with decals for your H-King Skipper All Terrain 700mm airplane.

Der Oberflächenmikroempfänger FGr8B verwendet das automatische Frequenzsprung-Digital-System (AFHDS 3) der dritten Generation von FLYSKY und ist perfekt für die Palette der PL18-, NB4- und NB4-Lite-Sender geeignet. Es verwendet ein bidirektionales Übertragungssystem mit einer Antenne, das speziell für die Installation und Ausgabe von PWM / PPM und iBUS in Signalen entwickelt wurde.

A replacement rigging set that includes stranded flying wire and crimps for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement fuselage for the H-King MX2 Extreme 30E.

A replacement wing set for the H-King MX2 Extreme 30E.

A replacement battery hatch with canopy and pilot for the H-King MX2 Extreme 30E.

A replacement horizontal stabilizer with elevator for the H-King MX2 Extreme 30E.

A replacement rudder with control horn for the H-King MX2 Extreme 30E.

A replacement spinner with backplate for the H-King MX2 Extreme 30E.

A replacement 3720-900KV brushless motor with prop shaft for the H-King MX2 Extreme 30E.

The Foxeer Predator 5 series of FPV cameras are the perfect companion to the Foxeer F722 V2 standard and mini flight controllers. The Predator has a 150° field of view, super WDR function for improved contrast in different light conditions, 4-millisecond latency for virtually instant feedback, all of which make it perfect for FPV racing.

Ein Ersatz Spornrad komplett mit Spornrad und Befestigungsschrauben für den H-King Swiss J-3 Piper Cub.

Bitte beachten: Diese Teile passen zu früheren Versionen des H-King 1400mm J-3 Cub, die Farben sind natürlich anders.

Ein Ersatzflügel-Set für den H-King Reno Aces P-51 "Galloping Ghost". Beinhaltet die Querruderservoabdeckungen, Stößelstangen und werkseitig angebrachte Aufkleber

Ein Ersatz-Rumpfset für die H-King Reno Aces P-51 "Galloping Ghost", inklusive werkseitig angebrachter Aufkleber. Bitte beachten Sie, dass das Oberdeck, die Kabinenhaube und die Motorhaube nicht mit diesem Rumpfset geliefert werden.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

Ein Ersatzlukendeckel mit goldenem Baldachin für den H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement horizontal stabilizer with elevator for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

A replacement hatch cover that is supplied with a clear, and gold canopy for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

This is a replacement pre-painted horizontal stabilizer for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted vertical stabilizer for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted vertical stabilizer for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pre-painted canopy and battery hatch for the H-King Yak-11 Red Reno Racer.