Schnäppchen Kasten

Dies ist ein sehr handliches kleines Gerät, das verwendet wird, um die Fahrwerksklappen und Fahrwerk während des Aus- und Einfahren sowohl zu sequenzieren.

Mit der Verwendung von spitter führt sind Sie in der Lage eine komplette Ausrüstung und Türsystem bei vielen Modellen zu sequenzieren, die aus nur einer dieser Einheiten korrekte Reihenfolge erfordern und von einem einzelnen Kanal auf Ihrem Receiver.

Es gibt zwei wählbare Sequenztypen und es gibt einen Beipackzettel enthalten.

Specs:
Abmessungen: 52x18x5mm
Spannungsbereich: 4.8-6.0v
Gewicht: 5,5 g

* Die Farbe kann variieren

Dies ist ein all-Laser schnittene Lage Cockpit, das eine integrierte Pan- und Tilt-System und Halterungen für eine komplette FPV-System. Das Cockpit wird als Direkt fit für die Hawkeye 1700 PC FPV Flugzeug entworfen, um die gleiche Bereitstellungspunkte und Sperren nutzen. Der Grundrahmen hat Bestimmungen für die FPV-Sender, Kabel und Batterie. Die Pan und Tilt-System verfügt über Montagepositionen 2quick loslassen, wird der vordere Position einen ungehinderten klare Sicht zu geben, auch die Rückseite Einbaulage können Sie die Lexan Vordach für eine schlanke aerodynamische FPV rig wiederzuverwenden. Die Pan- und Tilt eine 180 Grad Servo für Pfanne halten und eine 90 ° für Neigung (nicht im Lieferumfang enthalten). Es gibt verschiedene Montage- und Zugangslöcher eine breite Palette von FPV Kameras von Bord Würfel Stil gerecht zu werden.

Eigenschaften:
• Lasercut vorgefertigte Konstruktion
• Kann auf anderen Ebenen angepasst werden
• 2 Montagepositionen für die Schnellspanner Schwenk- und Neige
• Montagevorschriften für ein volles FPV System

Specs:
Gewicht: 78 g
Größe: 98x96x221mm WxHxL
Einrichtung: Direkt fit für die Hawkeye 1700 PC FPV Flugzeug (kann zu anderen , angepasst)

Erforderlich:
2 x 9g Servos, empfehlen 180 Grad und Metal Gear.

We all know the GoPro Hero as the take-it-anywhere workhorse of an action camera. Boldly going where no action cam has gone before; but how about giving your investment a little more protection from the dust and grime of everyday use?

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

Durafly Tundra - Abziehbildset (Orange / Grau)

Durafly Tundra - Abziehbildset (Blau / Rot)

These excellent colored pencils come pre-sharpened and ready to use with 72 vibrant colors. These pencils work smoothly on paper and sharpen easily without the tips breaking off. They are slightly harder than the water color pencils and are best used for sketching and drawing.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

This simple and effective charge lead comes pre-soldered with standard 4mm bullet connectors at the charger end and has stepped, bullet connectors at the battery end allowing you to charge hard case packs that utilise 4mm and 5mm connectors. 

Ultra-Cure Tire Glue has a water-thin viscosity that wicks deep into the bead of the tire and cures in a matter of a few seconds. The tire bead must be tight fitting and should be held together while you apply the CA around the edges of the seam.

Replacement cowling for the H-King Voltigeur

 H-King Voltigeur 1220mm - Abziehbildset

Front Sway Bar Set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy / Nitro  Circus MT 

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

The Micro Engineering's rail weathering solution is used to weather nickel silver or brass track and track joiners etc so that they match their weathered Flex-Trak.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

Made of TPU material, this flexible camera mount fits the Foxeer Box Cam and other action cameras. The TPU creates a soft protective layer for the camera and absorbs excess vibrations.

Durafly T-28 Marine 1100mm - Horizontaler Stabilisierer.

Durafly T-28 Marine 1100mm - Baldachin inklusive FPV-Tablett.

HobbyKing Bixler 2 EPO 1500mm - Replacement Fuselage (Blue/Red)

HobbyKing Bixler 2 EPO 1500mm - Replacement Canopy