Schnäppchen Kasten

Avios Grand Tundra - Canopy Hatch (Blue/Silver)

Avios Grand Tundra - Canopy Hatch (Green/Gold)

Avios Grand Tundra - FPV Hatch (Green/Gold)

Avios Grand Tundra - FPV Hatch (Blue/Silver)

Avios Grand Tundra - Receiver Hatch

Avios Grand Tundra - Water Rudder Set

Missing something? This replacement nose cone and foam insert will get you back in the air in no time. Designed for the Sidewinder Racing Wing 1100mm PNF, buy these quality spare parts for the lowest prices at HobbyKing.

Front Sway Bar Set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy / Nitro  Circus MT 

Rear sway bar set (silver/blue/black) - Basher SaberTooth 1/8 Scale Truggy

Make the most of your RC boat with this powerful ESC. Designed with a high performance MCU, the circuit design ensures strong anti-interference and intelligent technology. The waterproof design features fast throttle response, smooth speed control linearity, and programmable start mode.

Program your Turnigy Marine ESCs with this high-quality program card. Easy to use, this handy program card covers all your basic features and more. Select your Running Mode to ensure your ESCs operate forwards or backwards. The program card also allows you to choose your motor direction, low voltage protection threshold, timing set and start mode.

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

High Temperature Polyimide Tape has a high resistance to temperature extremes. Kapton tape is recommended for masking circuit boards and splicing wires. Made with polyimide film and silicone adhesive the tape can be easily released.

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

These are Micro Engineerings HO/N scale Code 70 to 55 slide on plastic insulating rail joiners. These insulating joiners are perfect for where you want to electrically isolate sections of track when transitioning from Code 70 to Code 55 rail.

The Micro Engineering's rail weathering solution is used to weather nickel silver or brass track and track joiners etc so that they match their weathered Flex-Trak.

The Micro Engineering's rail weathering solution is used to weather nickel silver or brass track and track joiners etc so that they match their weathered Flex-Trak.

Micro Engineering produces a range of building structure components to allow you to construct your own scratch built buildings. These are double baggage doors that are suitable for warehouses and other storage lineside buildings etc.

Micro Engineering produces a range of building structure components to allow you to construct your own scratch built buildings. These office windows/doors are typical of the style used in office blocks around the world. They have many other uses as well so can be used in a variety of buildings that may appear on a model railway.

Micro Engineering produces a range of building structure components to allow you to construct your own scratch built buildings. This is a selection of typical roof vents and fans that you would see on buildings all around the world. Add that bit of realism to your scratch built buildings with these protypical fittings.

Micro Engineering produces a range of building structure components to allow you to construct your own scratch built buildings. Around railway, industrial buildings and garage scenes there always old car tires hanging around cluttering up the place . Add that little bit of realism to your model railway layout with these very effective tire stacks and loose tires.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

The Micro Engineering N scale turnout parts includes a cast metal frog with a rib along the bottom, 2 x rail guards and a switch assembly made up of 2 switch rails with molded plastic throwbar.

3.5mm Male/Female bullet on opposing ends.

3.5mm Male/Female bullet on opposing ends.

Made of TPU material, this flexible camera mount fits the Foxeer Box Cam and other action cameras. The TPU creates a soft protective layer for the camera and absorbs excess vibrations.

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

H-King SkySword 70mm EDF - Replacement Left Wing (Yellow)

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

Durafly T-28 Marine 1100mm - Horizontaler Stabilisierer.

Durafly T-28 Marine 1100mm - Baldachin inklusive FPV-Tablett.

H-King Bixler 1.1 - Replacement Fiberglass Spar

JR Gold Plated Connectors are for JR style plugs. If you have ever had a servo lead where the wire has come off the connector then these contacts are just what you need for a repair. Although you can connect these to wires using a pair of needle nose pliers the best way is to use our JST Crimping Tool.