Luftfahrzeuge

A replacement nose cone for the AVIOS Albatross V2.

Note: This is also suitable for the Albatross V1.

A replacement set of decals for the AVIOS Albatross V2 US Coast Guard Flying Boat. 

A replacement fuselage with decals and canopy for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement wing set with flaps, ailerons, and decals for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement engine nacelle and cowl for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the US Coast Guard version of the Avios C-130 V2. Please note that this spare part is not suitable for the original versions of the C-130.

A replacement horizontal and vertical stabilizer set with elevators, rudder, and factory-applied decals for the Civilian Cargo version of the Avios C-130 V2.  Please note that this spare part is not suitable for the original versions of the C-130.

A replacement set of landing gear doors for the Civilian Cargo version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement 6.5x5 4 blade standard pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A replacement 6.5x5 4 blade reverse pitch propeller with backplate and screw for both versions of the Avios C-130 V2, is also suitable for the version 1 of the C-130.

A complete replacement nose landing gear set which includes servoless retract unit, gear doors, actuators, wiring, and housing for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A replacement main landing gear set which includes servoless retract unit, actuating rods, wheels struts, and axles for the US Coast Guard version of the Avios C-130 V2. This spare part is suitable for the original versions of the Avios C-130, but of course, the color scheme is quite different.

A complete replacement set of decals for the Civilian Cargo version of the Avios C-130 V2.

A complete replacement set of decals for the US Coast Guard version of the Avios C-130 V2.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement prop adapter for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement carbon wing joining spar for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement set of scale detailing parts for the AVIOS KingTwin 1700.

A replacement set of 10x6 left and right propellers for the AVIOS KingTwin.

Please note: These propellers are also suitable for the AVIOS BushMule and Albatross models.

A replacement set of main and nosewheel landing gear struts for the AVIOS KingTwin. 

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted vertical stabilizer for the Durafly Me-163B V2 "White 10" with rudder, and decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted cowl for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted take-off dolly with wheels for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement spinner for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement set of decals for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement aerial, and pitot head tube for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement accessory set for the Durafly Me-163B V2 "White 10". Includes, hex-wrench, pushrods, snap links, control horns, and control horn mounting screws.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

Durafly® ™ Messerschmitt Bf.110 - Ersatz Kühler Set (1pair)

Durafly ™ 5-Blatt Spifire Hub Set

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

Die Einführung unserer EVP 3D MX2. Mit einem fantastischen Design und Layout, das alle aus EPP 3D'er werden die eifrigsten 3D-Piloten erfüllen!

Es ist Rumpf sehr drehsteif ist dennoch leicht mit viel Platz unter dem langen oberen Luke für das Radio und Energiesystem. Der Flügel ist ein einteiliger Affäre mit EPP Konstruktion, eine sehr genaue symmetrischen Profil mit 2 zusätzlichen Holme flex zu minimieren und verdrehen. Die Steuerflächen sind etwas anderes - die Höhen- und Seitenruder und Querruder verfügen über eine 3-Schicht-Aufbau (Epp-Depron-EVP) macht für steife Oberflächen und keine flex bei extremen wirft! Gerissene Rollen 'Snap' und Regelverhalten ist augenblicklich.

Das Licht - noch starr - Zelle trägt zu einem großen fliegenden 3D 'schaumig' auf. Wasserfälle, Weihen, flache Spins, Roll Kreise dieses Modell hat die Präzision diese und andere Bewegungen auszuführen Sie denken können!

Montage der Zelle in einer schnellen 10-15 Minuten Prozess mit Hilfe eines kleinen mittel CA. Die Radio- und Energiesystem-Layouts sind sehr einfach, die lange obere Luke machen für einen einfachen Zugang.

Dies ist ein großes Vorbild für die allgemeine Park fliegen und Hardcore-3D. Sie werden sich schwer tun, um dieses Modell zu brechen, wird es harte Schläge nehmen und kommen immer wieder, jedes Mal aufprallen!


Eigenschaften:
• Robuste EPP-Material, geringes Gewicht und Crash-resistent
• Stiff EPP / Depron Verbundsteuerflächen
• Revolutionäres Design ergänzt die strukturelle Integrität und die Steifigkeit der Zelle
• Leichte sorgt für eine optimale Flächenbelastung
• Hervorragende Leistung und 3D-Kunstflug Wendigkeit.
• Einfaches Design ermöglicht eine einfache Ausrüstung Zugang und Installation
• Die große Farbschema zeichnen sich durch Orientierung


Specs:
Spannweite: 955mm
Länge: 945mm
Flügelfläche: 15.2dm2
Gewicht: 550 g (ohne Batterie)




Benötigt:
4-Kanal-Funksystem
2217 950-1100KV Brushless Outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 Propeller
4 x 9g Servos