Luftfahrzeuge

The FLYWING FW450L V3 is packed with features, the first thing, being ready to fly is that it comes with its own dedicated transmitter. This high-precision 9-channel transmitter has a range of more than 1km and is perfectly matched to the FW450L, there is no setting up, it is all done for you. At the heart of the FW450L is the H1 M10N positioning system, this is a high-precision IMU attitude calculation unit with barometer and GPS. This will allow the helicopter to hover over fixed points with no input from the pilot, and there is also a return to home and low battery return function. Another feature is the smart aerobatic mode, at the flick of a switch the helicopter will flip to the inverted, perfect for learning the art of inverted flying. The H1 M10N uses intuitive, easy-to-use software that will allow you to adjust all the parameters via your PC so that you can fine-tune the flying characteristics to your liking.

The all-metal rotor head is made of precision components for durability and precise controllability. Power is supplied to the main by a 16V brushless motor, and flight times with the supplied 5000mAh battery is up to 20 minutes. The FW450L also features a 60A, 32-bit processor ESC, fast, coreless motor 4KG torque metal-geared servos, high-speed brushless tail motor with a specially designed high-efficiency tail rotor, and a wide-stance landing gear for stability when on the ground.

The FLYWING range of helicopters ooze quality, they are aimed at the most discerning of pilots who are looking for a superior product that is manufactured to the highest of standards, from the best materials, and is filled with all the latest technology. But, they are also a very easy-to-fly, stable, user-friendly helicopter, that is as simple to fly as a high-spec drone. They all incorporate a modular design which allows for easy maintenance, detachable tail boom for easy transport, and quick battery changes without having to remove the canopy.

The FLYWING FW450L V3 is packed with features, the first thing, being ready to fly is that it comes with its own dedicated transmitter. This high-precision 9-channel transmitter has a range of more than 1km and is perfectly matched to the FW450L, there is no setting up, it is all done for you. At the heart of the FW450L is the H1 M10N positioning system, this is a high-precision IMU attitude calculation unit with barometer and GPS. This will allow the helicopter to hover over fixed points with no input from the pilot, and there is also a return to home and low battery return function. Another feature is the smart aerobatic mode, at the flick of a switch the helicopter will flip to the inverted, perfect for learning the art of inverted flying. The H1 M10N uses intuitive, easy-to-use software that will allow you to adjust all the parameters via your PC so that you can fine-tune the flying characteristics to your liking.

A replacement fuselage for the Avios Extra-300 NG 1600mm

A replacement left wing with aileron for the Avios Extra-300 NG 1600mm.

A replacement right wing with aileron for the Avios Extra-300 NG 1600mm.

A replacement horizontal stabilizer and rudder for the Avios Extra-300 NG 1600mm.

A replacement canopy and hatch cover for the Avios Extra-300 NG 1600mm.

A replacement wing and horizontal stabilizer spar set for the Avios Extra-300 NG 1600mm.

A replacement pushrod set for the Avios Extra-300 NG 1600mm

A replacement decal set for the Avios Extra-300 NG 1600mm

A replacement hardware set for the Avios Extra-300 NG 1600mm

A replacement head and shoulders pilot figure for the Avios Extra-300 NG 1600mm.

A replacement pair of side-force generators for the Avios Extra-300 NG 1600mm.

A replacement spinner for the Avios Extra-300 NG 1600mm

A replacement cowling with screws for the Avios Extra-300 NG 1600mm

A replacement tail wheel set for the Avios Extra-300 NG 1600mm

A replacement aluminum landing gear for the Avios Extra-300 NG 1600mm

A replacement pair of wheel pants with wheels for the Avios Extra-300 NG 1600mm.

A replacement LED Light bar with frame for the H-King Paramotor V2 2400mm

A replacement pre-painted fuselage with decals for the Avios Twin Otter Twin-Engine STOL plane.

Please note: The canopy/battery hatch, decals or nose sections are not included.

A replacement pre-painted long and short nose section for the Avios Twin Otter Twin-Engine STOL plane.

This is a replacement pre-painted wing center section for the Avios Twin Otter Twin-Engine STOL plane. Please note that the nacelles and cowls are NOT supplied with the wing section, they are available separately.

A pair of replacement motor cowls with infills for the Avios Twin Otter Twin-Engine STOL plane.

A replacement pair of pre-painted wing tips for the Avios Twin Otter Twin-Engine STOL plane.

A replacement pre-painted horizontal stabilizer for the Avios Twin Otter Twin-Engine STOL plane.

A replacement pair of horizontal stabilizer tail fences for the Avios Twin Otter Twin-Engine STOL plane.

A replacement pre-painted vertical stabilizer with rudder for the Avios Twin Otter Twin-Engine STOL plane.

A replacement pre-painted canopy/battery hatch for the Avios Twin Otter Twin-Engine STOL plane.

A replacement nose wheel and pair of main wheels for the Avios Twin Otter Twin-Engine STOL plane.

A replacement float set with wire attachment struts for the Avios Twin Otter Twin-Engine STOL plane.

A replacement float pair of 3-blade spinners for the Avios Twin Otter Twin-Engine STOL plane.

A replacement main landing gear with strut covers and collets for the Avios Twin Otter Twin-Engine STOL plane.

A replacement nosegear landing strut for the Avios Twin Otter Twin-Engine STOL plane.

A replacement pair of wing struts for the Avios Twin Otter Twin-Engine STOL plane.