Luftfahrzeuge

A complete replacement decal set for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement fuselage with vertical stabilizer and rudder for the Durafly Night Tundra STOL/Sports model.

A replacement wing set with hinges and control horns for the Durafly Night Tundra STOL/Sports model.

A replacement nose cowl for the Durafly Night Tundra STOL/Sports model.

A complete replacement decal set for the Durafly Night Tundra STOL/Sports model.

A replacement canopy/battery hatch with factory-installed magnetic catch for the Durafly Night Tundra STOL/Sports model.

Der unglaubliche Frenzy ist der perfekte Allrounder. Mit reduzierten Steuerausschlägen ist es ein glattes, stabiles und bemerkenswert einfach zu fliegendes Flugzeug, das perfekt für Anfänger oder Anfänger ist. Erhöhen Sie diese Würfe, und mit seinem hohen Leistungsgewicht bei einem 3S-Setup macht der Frenzy seinem Namen alle Ehre. Es ist zu einer Vielzahl erstaunlicher Kunstflugmanöver fähig und wird selbst den anspruchsvollsten Kunstflugpiloten gerecht.

This beautiful model of a Grumman F8F Rare Bear Reno Racer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

Dieses großartig aussehende kleine Flugzeug steht für die goldene Ära der Luftfahrt, die durch fortschrittliche Veränderungen sowohl bei Zivil- als auch bei Militärflugzeugen gekennzeichnet war. Die Beechcraft D17S Staggerwing ist dank ihres großen, aber leichten Sternmotors ein schneller amerikanischer Doppeldecker, und sie war auch eines der ersten Flugzeuge mit einer komfortablen, geschlossenen Kabine im Executive-Stil.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 1600 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

Dieses neueste Modell, das den Bixler 2 verbessert, ist das perfekte RC-Trainerflugzeug, der perfekte RC-Segelflugzeug und das perfekte FPV-Flugzeug für Anfänger. Befestigen Sie Ihre Flugkamera in der Nase oder im Baldachin des Flugzeugs, um die First Person View während des Flugs zu genießen. Das Bixler 3 PNF-Flugzeug ist ein Plug-and-Fly-Modell, das ein Funksystem und eine Batterie benötigt.

Mit einem neuen Farbschema erleichtern der dynamische Kontrast und die Streifen auf der Unterseite die Orientierung. Der Motor wurde für effizientere Flugzeiten auf einen bürstenlosen 2620-1400-kV-outrunner aktualisiert. Kombinieren Sie dieses elektrische RC-Schaumflugzeug mit einem 2200-mAh-3S-20C-LiPo-Akku sowie einem 4-GHz-6-Kanal-Sender und -Empfänger für optimales Fliegen.

Der H-King Crusader 30E basiert auf dem klassischen Stick-Design. Dieses elektrische RC-Flugzeug kann sowohl von Anfängern als auch von Experten geflogen werden. Es besteht aus einer leichten Lage und Balsa, die mit einem kontrastreichen Farbschema bemalt sind. Der Crusader wird in Ihrem örtlichen Hobbyclub am Boden und in der Luft auffallen.

Der Bixler 1.1 ist ein bewährtes Elektro-RC-Flugzeug für Anfänger bis hin zu fortgeschrittenen Piloten. Der Bixler 1.1 ist bekannt für seine Stabilität, Langlebigkeit und seinen erschwinglichen Preis und ist eines der besten RC-Flugzeuge für Einsteiger auf dem Markt. Es ist auch eine ausgezeichnete Wahl als kostengünstige FPV-Plattform und perfekt für faule Wochenendnachmittage.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

A replacement vertical stabilizer with rudder and factory-applied decals for the AXN Floater-Jet. Please note that this spare part may have a different color scheme to your AXN Floater-Jet but that is the only difference.

A replacement 10x6 propeller for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A complete replacement set of LED lights with wiring and connectors for the Durafly Night Tundra STOL/Sports model. Also could be used on your existing Tundra or other models of a similar size.

A replacement 3025-1000kV brushless motor for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.