Luftfahrzeuge

A replacement pre-painted motor cowl for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

One pair of replacement main wheels for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Please note:  These wheels are also suitable for the other Tundra series of STOL models except the Grand Tundra.

Diameter: 120mm

A replacement linkage and screw set for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

One pair of replacement wing struts for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement propeller adapter for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement 3025-1000kV brushless motor for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A complete replacement decal set for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement fuselage with vertical stabilizer and rudder for the Durafly Night Tundra STOL/Sports model.

A replacement wing set with hinges and control horns for the Durafly Night Tundra STOL/Sports model.

A replacement nose cowl for the Durafly Night Tundra STOL/Sports model.

A complete replacement decal set for the Durafly Night Tundra STOL/Sports model.

A replacement canopy/battery hatch with factory-installed magnetic catch for the Durafly Night Tundra STOL/Sports model.

A complete replacement set of LED lights with wiring and connectors for the Durafly Night Tundra STOL/Sports model. Also could be used on your existing Tundra or other models of a similar size.

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.