Luftfahrzeuge
-
H-KING Turbo BushMaster V2 STOL 3D RC Airplane PNF 1830mm369,31 €Learn MoreH-KING BUSHMASTER 2From Short-Field STOL
to Full 3D.The H-KING BushMaster 2 is an 1830mm high-wing sport aircraft that combines short-field capability, smooth slow-speed handling and 3D aerobatic performance in one airframe.
Large flaps, oversized control surfaces, air-filled tires and a 6S power system give you the freedom to fly from rougher fields, cruise comfortably at low speed, or push into more aggressive aerobatics.STOL Short-field and rough-surface capabilityLarge Control Surfaces Strong authority for slow flight and 3D6S Power Strong climb and aerobatic performanceRemovable Wings Easier transport and storage
Built for More Than One Style of Flying
The BushMaster 2 gets its wide flight envelope from three key areas: large control surfaces, rough-field landing gear and a 6S power system.
01 / CONTROLBig Surfaces. Big Authority.
The oversized ailerons and flaps account for approximately 40% of the total wing area, giving the BushMaster 2 strong control authority at low speed and during more aggressive aerobatics.
02 / ROUGH FIELDAir-Filled Tires for Rougher Fields
Oversized air-filled tires provide additional shock absorption for grass and less-than-perfect flying surfaces, helping make short-field operation more practical.
03 / POWER6S Power When You Need It
The 5015-550KV brushless motor, 80A ESC and 16 x 6 propeller deliver the power needed for strong climb performance and more demanding aerobatic flying.
What Makes the BushMaster 2 So Versatile
From short-field takeoffs to high-control aerobatics, each part of the BushMaster 2 is designed to support a wider range of flying.
01 / STOL & ROUGH-FIELD FLYINGShort Takeoffs. More Surface Options.
Large landing flaps help reduce speed for short-field flying, while oversized air-filled tires provide additional shock absorption for grass and less-than-perfect surfaces.
With the flaps fully deployed, the BushMaster 2 is designed for short takeoffs of approximately 1–2 meters.02 / OVERSIZED CONTROL SURFACESControl Authority from Slow Flight to 3D.
The BushMaster 2 combines smooth slow-speed characteristics with oversized ailerons and flaps for substantially greater control authority.
Together, the ailerons and flaps account for approximately 40% of the total wing area, helping provide the response needed for more demanding 3D aerobatics.
03 / 6S POWER SYSTEMPower for Climb, Speed and Aerobatics.
The BushMaster 2 is built around a 6S-compatible power system to provide the performance required for a large 1830mm sport airframe.
The combination of brushless power, an 80A ESC and a 16 x 6 propeller gives the aircraft strong power delivery for climb-outs and more aggressive flying.Power System: 5015-550KV brushless outrunner, Aerostar G2 80A ESC and 16 x 6 propeller.04 / AIRFRAME & TRANSPORTReinforced EPO. Removable Wings.
The BushMaster 2 uses lightweight EPO construction with composite reinforcement for added rigidity and durability.
The main wings can be removed by reversing the installation procedure, making the 1830mm airframe easier to transport to the field and more convenient to store at home.
BushMaster 2 Specifications
Wingspan 1830mm / 72in Length 1330mm / 52.36in Flying Weight 2961g / 6.53lb Motor 5015-550KV Brushless Outrunner ESC Aerostar G2 80A Brushless ESC with 6V / 7.4V 8A SBEC Servos 2 x 25g + 4 x 19g Digital Metal-Gear Servos Propeller 16 x 6 2-Blade Recommended Battery 3000–5000mAh 6S 40–60C LiPo with XT90 Recommended CG 60–70mm from the wing leading edge What's in the Box / Required to Fly
What's in the Box
- BushMaster 2 fuselage
- Left and right main wings
- Horizontal and vertical stabilizers
- Winglets
- Main wing spar and wing struts
- Landing gear and wheel set
- 16 x 6 propeller and spinner
- Hardware / screw set
Required to Fly
Not included — add these items to complete your setup.
- 4–6 channel RC transmitter
- Compatible receiver
- 3000–5000mAh 6S 40–60C LiPo battery with XT90
Assembly tools: Phillips screwdriver and foam glue.
BushMaster 2 FAQ
Key information to help you choose, set up and fly the BushMaster 2.
Is the BushMaster 2 suitable as a first RC airplane?
The BushMaster 2 is better suited to pilots with some previous RC flying experience. Its large control surfaces and broad flight envelope allow everything from relaxed sport flying to STOL and 3D aerobatics, but a dedicated trainer is generally a better choice for a completely new RC pilot.
What battery does the BushMaster 2 use?
The recommended setup is a 3000–5000mAh 6S 40–60C LiPo battery with an XT90 connector. Battery position can be adjusted forward or backward to achieve the correct center of gravity.
Can the BushMaster 2 operate from grass or rough surfaces?
Yes. The oversized air-filled tires provide additional shock absorption and are designed to support takeoffs and landings on grass and other less-than-perfect flying surfaces.
What kind of STOL performance can I expect?
With the flaps fully deployed, the BushMaster 2 is designed for short takeoffs of approximately 1–2 meters. Actual takeoff distance will vary with surface conditions, wind, aircraft setup and pilot technique.
Can the wings be removed for transport?
Yes. The main wing installation procedure can be reversed to remove the wings for easier transport and storage.
How much assembly is required?
Final assembly includes installation of the horizontal and vertical stabilizers, landing gear, winglets, main wings, wing struts and propeller. Foam glue is required for the specified tail assembly steps.
What is the recommended CG?
The recommended CG range is 60–70mm from the wing leading edge. The 70mm position provides more good-natured general handling, while 60mm is intended for more aggressive 3D flying.
-
H-King Viper 64 Black Edition w/64mm EDF Fan, Brushless, 45A ESC, Servos, 1000mm (PNF)184,65 €Unleash the power and prestige of the limited edition Black Viper 64. This exclusive 6S EDF jet combines stunning looks with explosive speed and beginner-friendly stability.
Strike with style! The H-King Viper 64 EDF Jet has been reborn in a sinister new scheme for a limited edition release. Dressed in a sleek silver and black paint job with a menacing Snake Head logo, this jet is as fast as it looks. Powered by a robust 6S setup, it delivers a breathtaking turn of speed and a realistic turbine-like sound that guarantees to command attention at your flying field.
Learn More -
XFLY (PNF) Eagle Twin 40mm EDF Flying Wing Racing Jet w/Gyro EPO 1019mm (Red/White)147,72 €The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.
Learn More -
XFLY (PNF) Eagle Twin 40mm EDF Flying Wing Racing Jet w/Gyro EPO 1019mm (Green/White)147,72 €The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.
Learn More -
Dancing Wings Hobby (Kit) Cute Girl Retro Laser Cut Balsa Trainer Kit (1150mm)46,16 €The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.
Learn More
The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.
Login and Registration Form