Luftfahrzeuge
-
H-King PNF Swiss J-3 Piper Cub EPO 1400mm161,18 €Diese Version der beliebten Piper J-3 Cub ist in einem auffälligen neuen Schweizer Farbschema, das ein Muss für alle Scale-Piloten ist. Dieses Farbschema verwendet eine Menge weniger Farbe, so gibt es ein bisschen eine Einsparung im Gewicht, die weiter reduziert die bereits niedrige Flächenbelastung. Die Liebe zum Detail macht es zu einem extrem realistischen Modell, und es kommt mit einer schönen, großzügigen Größe 1400mm Spannweite. Wie alle Cub's mit ihrer großen Spannweite und den stabilen Flugeigenschaften ist sie sehr einfach zu fliegen, perfekt für Low-Hour-Piloten und Experten gleichermaßen. Die Swiss Cub hat außerdem ein neues Ganzmetallfahrwerk, das praktisch unzerstörbar ist und auch die härtesten Landungen übersteht. Eine weitere Gewichtsersparnis wurde durch die Entfernung der metallischen Heckverstrebungen erreicht, die durch maßstabsgetreue, einfach zu montierende, leichte, elastische weiße Stoßseile ersetzt wurden.
Learn More -
H-King Yak-11 Steadfast Einzelsitzer 6S Racer EPO 1450mm (PNF)349,10 €The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.
Learn More
The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills. -
XFLY X1500 Twin propeller FPV Aircraft Red PNP RC plane275,41 €XFly X1500 Twin Power FPV Aircraft 1500mm PNP
Learn MoreDescription
The XFly X1500 Long Endurance FPV PNP in Red (XFW004P-R) is a purpose-built fixed-wing platform engineered for extended missions and efficient cruising. Its wear-resistant EPP foam airframe is reinforced with high-strength 3D-printed components, and a glue-free, quick-assembly design enables deployment in as little as two minutes. A conventional layout with a high-lift airfoil delivers smooth, predictable handling and excellent cruise efficiency.
A twin power system provides a thrust-to-weight ratio greater than 1 when unloaded and supports payloads of up to 1kg. With a carefully aligned thrust line and balanced centre of gravity, the X1500 can be launched by hand or via a short ground roll. Reinforced rubber tyres on the underside stand up to repeated takeoffs and landings. The spacious battery bay accepts a 21700 4S2P 10000mAh pack (not included) and leaves room for additional payloads, while a mid-fuselage equipment compartment simplifies installation of flight controllers, GPS modules and other avionics. Pre-configured mounting points on the FPV nose cone and battery hatch offer suggested compatibility with mainstream FPV systems such as DJI and Walksnail.
This PNP version arrives with motors, ESCs and servos installed, letting you focus on integrating your radio system, power pack and onboard electronics to suit your mission profile.
Features
- Glue-free, quick-assembly airframe for rapid field setup.
- Twin efficient power system for strong performance and long endurance.
- Durable EPP foam construction with reinforced rubber tyres.
- Hand-launch or wheeled takeoff/landing capability.
- Spacious compartments for easy integration of multiple avionics.
- Pre-configured FPV mounting points with suggested compatibility for DJI and Walksnail.
Technical Specifications
- Material: Durable EPP foam
- Wingspan: 1500mm (59.0in)
- Length: 1050mm (41.3in)
- Flying Weight: Around 1900g
- Payload Support: Up to 1kg
- Power System: Twin 2212 1400Kv outrunner brushless motors (installed)
- ESCs: 40A brushless ESC x 2 (installed)
- Servos: 9g metal gear servo x 5 (installed)
- Propellers: 8 x 5 two-blade CW & CCW set (included)
- Battery Bay: Fits 21700 4S2P 10000mAh pack (not included)
- Radio: 6-channel radio control (not included)
- Colour: Red
Content
- XFly X1500 Twin Power FPV Aircraft 1500mm PNP
- Motor: 2x 2212 1400Kv
- ECS: 2x 40A
- Servos: 5x 9g servo
Required
- 21700 4S2P 10000mAh Battery
- Transmitter and Receiver (6-channel or higher)
-
XFLY X1500 Twin propeller FPV Aircraft Blue PNP RC plane275,41 €XFly X1500 Twin Power FPV Aircraft Blue 1500mm PNP
Learn MoreDescription
The XFly X1500 Long Endurance FPV PNP in Blue (XFW004P-R) is a purpose-built fixed-wing platform engineered for extended missions and efficient cruising. Its wear-resistant EPP foam airframe is reinforced with high-strength 3D-printed components, and a glue-free, quick-assembly design enables deployment in as little as two minutes. A conventional layout with a high-lift airfoil delivers smooth, predictable handling and excellent cruise efficiency.
A twin power system provides a thrust-to-weight ratio greater than 1 when unloaded and supports payloads of up to 1kg. With a carefully aligned thrust line and balanced centre of gravity, the X1500 can be launched by hand or via a short ground roll. Reinforced rubber tyres on the underside stand up to repeated takeoffs and landings. The spacious battery bay accepts a 21700 4S2P 10000mAh pack (not included) and leaves room for additional payloads, while a mid-fuselage equipment compartment simplifies installation of flight controllers, GPS modules and other avionics. Pre-configured mounting points on the FPV nose cone and battery hatch offer suggested compatibility with mainstream FPV systems such as DJI and Walksnail.
This PNP version arrives with motors, ESCs and servos installed, letting you focus on integrating your radio system, power pack and onboard electronics to suit your mission profile.
Features
- Glue-free, quick-assembly airframe for rapid field setup.
- Twin efficient power system for strong performance and long endurance.
- Durable EPP foam construction with reinforced rubber tyres.
- Hand-launch or wheeled takeoff/landing capability.
- Spacious compartments for easy integration of multiple avionics.
- Pre-configured FPV mounting points with suggested compatibility for DJI and Walksnail.
Technical Specifications
- Material: Durable EPP foam
- Wingspan: 1500mm (59.0in)
- Length: 1050mm (41.3in)
- Flying Weight: Around 1900g
- Payload Support: Up to 1kg
- Power System: Twin 2212 1400Kv outrunner brushless motors (installed)
- ESCs: 40A brushless ESC x 2 (installed)
- Servos: 9g metal gear servo x 5 (installed)
- Propellers: 8 x 5 two-blade CW & CCW set (included)
- Battery Bay: Fits 21700 4S2P 10000mAh pack (not included)
- Radio: 6-channel radio control (not included)
- Colour: Blue
Content
- XFly X1500 Twin Power FPV Aircraft blue 1500mm PNP
- Motor: 2x 2212 1400Kv
- ECS: 2x 40A
- Servos: 5x 9g servo
Required
- 21700 4S2P 10000mAh Battery
- Transmitter and Receiver (6-channel or higher)
-
HobbyKing Sports Hawk "ARF-Plus" 105mm EDF Jet mit Fahrwerken, Servos und LED-Lichtern1.104,40 €This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.
Learn More -
Avios (PNF) Spitfire Mk.1a w/Retracts, Flaps, & LED Nav Lights EPO 1450mmSpecial Price 331,59 € Regular Price 368,43 €The Supermarine Spitfire is the most famous fighter plane from the Second World War, and the Mk.1a defines where its history started. This Avios model represents an early WW2 version that came out just before the "Battle of Britain". It looks stunning and is possibly the best-looking and best-flying foam Spitfire on the market today. At this point, we would like to give thanks to Tom Hunt, whose drawings the Avios Spitfire Mk.1a is based on, and it is one of the main reasons why this Avios Spitfire (just like its smaller brother from Durafly) flies so well.. The Mk.1a has that truly iconic shape and lines of the Supermarine Spitfire as it was seen through the eyes of its original designer, R.J. Mitchell. The upper surfaces have a brand new, authentic early WW2 camouflage color scheme, with a black and white scheme underneath. This scheme was used from 1938 and during the "Phony War" on RAF fighters to help the observation of friendly aircraft from the ground. The Avios Spitfire Mk.1a is a poignant and fitting tribute to the pilots who flew them during these early years of aerial combat.
Learn More -
XFLY Tasman 1500mm Orange PNP RC plane230,27 €Learn MoreXFly Tasman 1500mm PNP
Description
The XFly 1500mm (59.1'') Tasman is a STOL-capable, high-wing airplane featuring sporty flight and aerobatic 3D performance. The Tasman's impressive flight characteristics and large air-filled shock-absorbing tires make short takeoffs and aggressive landings on any type of surface easy. The 4S-compatible brushless motor, 40A ESC, 2-blade propeller and a 4S Lipo battery proved to be the optimum setup for power and duration, allowing the plane to hover, roll, loop and fly inverted easily, which makes it highly recommended as an advanced trainer.
Factory-installed LED navigation lights, plus operational flaps, are functional scale features that take your experience to another level. The Tasman comes equipped with a latch-type top hatch to fit 4S 2200-3300mah batteries for a wide range in performance and flight times.
If you are looking for an advanced trainer with STOL capabilities, sport performance and simple aerobatic 3D capabilities, look no further than the XFly Tasman!
Features
- Lightweight yet durable composite-reinforced EPO
- Larger wing and functional flaps delivering short takeoff and landings (STOL) plus 3D capabilities
- Unique oversized pair of air-filled tires that deliver great bounce and rebound resiliency. These wheels make hard or uneven terrain landings/takeoffs possible
- Realistic-looking LED navigation lights
- Latch-type top hatch to fit 4S 2200-3300mAh batteries for a wide range in performance and flight times
Technical Specifications
- Wingspan:?1500mm / 59in
- Length:?1150mm / 45in
- Wing load:?50g/dm2
- Wing Area:?36dm2
- Flying weight: around?1800g
- Motor:?3536-KV900
- ESC:?40A
- Servo: 9g digital servos x 6
- CG: 60mm from the leading edge
- Recommended battery: 4S 2200-3300mah
- Landing gear:?Fixed main landing gear, steerable rear gear
- Ailerons:?Yes
- Elevator:?Yes
- Rudder:?Yes
- LED: Yes
- Flaps:?Yes
- Recommended Radio: 5 channel
- Recommended environment:?Outdoor
- Flying time: Approx. 6-10 minutes
- Mounting duration: around 20?minutes
Content
- XFly Tasman 1500mm PNP?(Bush/Trainer)
- Propeller:?2 blade
- Motor:?1x Brushless Outrunner?3536-KV900
- ECS:?40A
- Servos:?9g digital servos x 6
Required
- 5-Channel radio transmitter
- 5-Channel receiver
- 4S 2200-3300mah Battery
- 4S Battery charger
-
XFLY Tasman 1500mm Blue PNP RC plane230,27 €Learn MoreXFly Tasman 1500mm PNP
Description
The XFly 1500mm (59.1'') Tasman is a STOL-capable, high-wing airplane featuring sporty flight and aerobatic 3D performance. The Tasman's impressive flight characteristics and large air-filled shock-absorbing tires make short takeoffs and aggressive landings on any type of surface easy. The 4S-compatible brushless motor, 40A ESC, 2-blade propeller and a 4S Lipo battery proved to be the optimum setup for power and duration, allowing the plane to hover, roll, loop and fly inverted easily, which makes it highly recommended as an advanced trainer.
Factory-installed LED navigation lights, plus operational flaps, are functional scale features that take your experience to another level. The Tasman comes equipped with a latch-type top hatch to fit 4S 2200-3300mah batteries for a wide range in performance and flight times.
If you are looking for an advanced trainer with STOL capabilities, sport performance and simple aerobatic 3D capabilities, look no further than the XFly Tasman!
Features
- Lightweight yet durable composite-reinforced EPO
- Larger wing and functional flaps delivering short takeoff and landings (STOL) plus 3D capabilities
- Unique oversized pair of air-filled tires that deliver great bounce and rebound resiliency. These wheels make hard or uneven terrain landings/takeoffs possible
- Realistic-looking LED navigation lights
- Latch-type top hatch to fit 4S 2200-3300mAh batteries for a wide range in performance and flight times
Technical Specifications
- Wingspan:?1500mm / 59in
- Length:?1150mm / 45in
- Wing load:?50g/dm2
- Wing Area:?36dm2
- Flying weight: around?1800g
- Motor:?3536-KV900
- ESC:?40A
- Servo: 9g digital servos x 6
- CG: 60mm from the leading edge
- Recommended battery: 4S 2200-3300mah
- Landing gear:?Fixed main landing gear, steerable rear gear
- Ailerons:?Yes
- Elevator:?Yes
- Rudder:?Yes
- LED: Yes
- Flaps:?Yes
- Recommended Radio: 5 channel
- Recommended environment:?Outdoor
- Flying time: Approx. 6-10 minutes
- Mounting duration: around 20?minutes
Content
- XFly Tasman 1500mm PNP?(Bush/Trainer)
- Propeller:?2 blade
- Motor:?1x Brushless Outrunner?3536-KV900
- ECS:?40A
- Servos:?9g digital servos x 6
Required
- 5-Channel radio transmitter
- 5-Channel receiver
- 4S 2200-3300mah Battery
- 4S Battery charger
Login and Registration Form