送受信機/サーボ

The Archer line of receivers has been enhanced further with the Plus Series, they include some exciting new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, they also feature ACCESS and ACCST D16 modes where the RF protocol is smart matched during the binding process. Another feature is a Black-Box function, which records basic flight details such as power and signal-related data.

The FrSky Plus SR8 receiver is designed for use in RC airplanes, it works as a traditional 8-Channel PWM Rx, but it also has a built-in 3-axis gyro and a 3-axis accelerometer sensor module. With the built-in sensors, the Plus SR8 will compensate for outside forces on the airplane and will enhance the stability making it easier and smoother to fly. The Plus SR8 supports multiple flight modes, Auto-level, Stabilisation, Hover, and Knife-Edge. Also available are several configuration methods, these include LUA, or the FrSky S.port Airlink+ combined with the Freelink App.

The FrSky High Precision Vario Sensor monitors atmospheric pressure and reports altitude and changes in pressure, this will indicate where the lift is which is invaluable if you want to find thermals with your RC glider.

The advanced high-precision variometer sensor calculates the altitude from atmospheric pressure, the atmospheric pressure drops as you rise in altitude. Using this change in pressure the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. This unit has been designed to be used in conjunction with FrSky telemetry-enabled transmitter and receiver system.

This advanced telemetry sensor incorporates a GPS module to provide useful variable directional information such as position, speed, distance, altitude, and UTC time. It can then be displayed in real-time on FrSky's Taranis transmitters, this can also be logged onto the radio's SD card. This location data is particularly useful for "lost aircraft situations" providing you with the coordinates of your lost model if it's still in radio range or its last known position if not.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function in the ETHOS system. This ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. This sensor will only work with the FrSky F.Port and Smart Port-enabled receivers. It does not provide autonomous GPS navigation or an RTH mode for your model; it is purely to provide data to your radio.

The best just got better, the RADIOMASTER TX16S Max MKII OpenTx radio has been created to be the best radio in its class without compromising anything. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, retooled Tx body shell for improved fit and finish, redesigned battery cover, improved knobs and sliders that are smoother with a better center ident. The TX16S Max MKII is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

Want to experience the efficiency, long range, and low latency of the ELRS protocol without purchasing a new radio? Then RADIOMASTER has you covered!

The Ranger Nano 2.4GHz ELRS module represents the cutting edge in ELRS technology, and it's compatible with the RADIOMASTER Zorro series and more. It features F-1000Hz refresh rates, a high-efficiency cooling system, WiFi, and Bluetooth connectivity, and a T antenna. Enjoy all that ELRS has to offer with a RADIOMASTER Ranger Nano TX module.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RADIOMASTER MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by the EdgeTX and ExpressLRS multi-module project. The MT12 is available as either an ELRS or 4-in-1 multi-module version (see specs) and boasts 10 physical inputs, and the capability to handle either 16 or 32 channels (4-in-1 version only). The ELRS (ExpressLRS) version is designed to provide a reliable long-range, ultra-fast response, super low latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm. Each version is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

WalkeraのF210レーシングクワッド- DEVO-RX713レシーバー

型番：F210-Z-25

In the world of racing drones the requirements are for small and light weight components. The FS-A8S receiver fits these requirements superbly, being only 20x14x5.3mm and 1.2g.

The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

 This is an excellent receiver to add to your Turnigy Evolution, Turnigy i6S and Turnigy i10 radios.

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Designed with space-saving and light weight in mind to fit into the smallest of drones, Frsky's XM+ Micro Ultra-Light 16 Channel receiver is no lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe and up to 1km range, the XM+ is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7 and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

Designed with space-saving and lightweight in mind to fit into the smallest of drones, Frsky's XM Plus Micro Ultra-Light 16-Channel receiver is not lightweight when it comes to performance!

Boasting no less than 16 channels, failsafe, and up to 1km range, the XM Plus is compatible with FrSky's D16 mode found on Taranis X9D, X9D Plus, X9E, Q X7, and Horus transmitters as well as external modules, so the full programming power of FrSky's operating systems can be at your fingertips.

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

The Corona R6SF 2.4GHz S-FHSS compatible 6Ch receiver is designed for use with Futaba S-FHSS/FHSS 2.4GHz transmitters, such as T4YF/T6J/T6K/T8J/T10J/T14SG/T18MZ & T18SZ air systems or 3PL/T3PRKA/4PLS/T4PX or T4GRS using S-FHSS/FHSS RF protocol.

When working in "Special mode" the R6SF can output up to 8 channels using S.bus to allow greater flexibility in performance as well as a convenient way to reduce the wire count in tight installations.

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

The FrSky Taranis Q X7S is the next step on from the original Taranis Q X7 and comes in a stunning blue case. It also keeps all the cool features of the Taranis Q X7 but adds even more stunning features. It still has all the usual Taranis features in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.