パワーシステム

Quality wire and connectors used on all Servo Lead Extensions. Great for larger planes with servos that experience high loads.

JST-SH Servo Plug Set for Futaba style terminals. These gold plated JST-SH plug kits are a must-have for any RC enthusiast, there will be a time when you strip out a wire from your servo plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets each of both male and female connectors to give you both options.

These are good quality lightweight extension leads with a JR style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

Good quality Futaba style 45cm servo extension leads with 26AWG PVC covered wire.

These are good quality lightweight extension leads with a JR style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are a good quality servo extension lead with the JR style male/female connectors fitted.

These are good quality twisted servo extension leads with a Futaba style male connector one end and a female connector on the other. These are ideal for connecting servos in wings or down the tail end of fuselages etc. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted extension leads with a Futaba style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted extension leads with a Futaba style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted extension leads with a JR style male connector on one end and a female on the other. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality servo leads with a JR style male connector on one end only.

These are good quality lightweight extension leads with a Futaba style male connector on one end and a female on the other. Perfect for park flyers and other lighweight flying models.

These are a good quality twisted servo lead with a JR style male connector on each end. These are ideal for connecting receivers to gyros and flight control boards etc. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are a good quality servo Y lead with the JR style 1 x male and 2 x female connectors fitted. These Y leads are perfect for running 2 servos from the one receiver servo port.

These are good quality twisted servo extension leads with a Futaba style male connector one end and a female connector on the other. These are ideal for connecting servos in wings or down the tail end of fuselages etc. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These are good quality twisted leads with a Futaba style male connector on one end. Twisting wires together reduces the possibility of radiation which in turn reduces the risk of radio interference and glitching.

These Futaba style 30cm servo extension leads feature a retaining clip on the female end for a positive lock, perfect for those installations hidden away in wings and fuselages etc.

These are a good quality servo Y lead with the Futaba style 1 x male and 2 x female connectors fitted. These Y leads are perfect for running 2 servos from the one receiver servo port.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

The FTr10 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a double-antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr10 is a small, lightweight 2.4GHz receiver that will accept a wide input voltage of between 3.5~18V, has an incredible range in interference-free open areas of up to 10km, and its unique design includes i-BUS, S-BUS, PPM, PWM, and UART data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18 radio system. With all these features it is the perfect choice for drone flying, drone racing, FPV, and other long-range applications.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The FTr4 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr4 is a small, lightweight 2.4GHz receiver that will accept an input voltage of between 3.5~8.4V, has a range in interference-free open areas of up to 500m, and its unique design includes i-BUS, S-BUS, PPM, and PWM data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18, and NB4 radio systems. With all these features it is the perfect choice for drone flying, gliding, and small fixed-wing aircraft.

An optional CNC, anodized metal folding handle that will fit most of the RADIOMASTER multi-protocol series of transmitters.

Complement your RADIOMASTER TX16S transmitter with these very smart and comfortable leather side grips. These grips are made of brown leather,  other colors are available.

This incredible transmitter, receiver combo is the perfect partner for almost everything you want to control on the surface. Whether it is a large or small car or buggy, multi-function crawler, tank, or boat, the DumboRC DDF-350 will handle them all and more. The amount of features is phenomenal, here are just a few: It supports complex tank mixing, real-time voltage telemetry up to 40 meters, has 10 model memories, steering and throttle curves, head tracking function, winch control function, trainer system and a range of 350 meters. The DDF-350 is a steer-wheel type transmitter with a foam grip for non-slip driving and a trigger for throttle and brake functions.

The DumboRC DDF-350  is supplied with the popular XRDC 6ch receiver. This receiver includes an LED light module which gives you features such as stop lamps, flashing lights, turn indicators, etc. The receiver is also splash-proof, making it perfect for all manner of uses and in most types of conditions.

Description:
Item NO.: CYS-S8220
Description : 9g digital servo for 450 classes helicopter
Size : 23*12*25.4MM
Torque : 1.8Kg.cm ~ 2.5Kg.cm
Speed : 0.11sec ~ 0.09sec/60 degree
Voltage : 4.8Volts ~6.0Volts
Weight : 14± 1 g

Description:
Item NO.: CYS-S3019 MG
Description : 17G Digital servo with metal gear for airplane
Size : 37.66*13.3*33.8MM
Torque : 3.0Kg.cm ~ 3.4Kg.cm
Speed : 0.13sec ~ 0.09sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 23± 1 g

The 22 series digital servo CYS-S2213 is designed to deliver top-notch performance in a sleek package. Outfitted with high-strength titanized gears, this servo offers exceptional durability and smooth gear engagement. It provides a powerful torque output of 13kg.cm, ideal for handling challenging tasks with ease. The servo is also built for speed, achieving a rapid transit time of 0.11sec/60º for responsive and accurate control.

Description:
Item NO.: CYS-BLS5507 Low profile digital servo
Description : Brushless drifted servo motor for 1/10 RC car
Size : 40*20*25.2MM
Torque : 7.0Kg.cm ~ 8.0Kg.cm
Speed : 0.06sec ~ 0.05sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 43± 1 g

Description:
Item NO.: CYS-S0150 15Kg standard size servo
Description : 15Kg servo motor for rc car-rc boat-rc plane
Size : 40.5*20*38MM
Torque : 14Kg.cm ~ 15Kg.cm
Speed : 0.17sec ~ 0.15sec/60 degree
Voltage : 6.0Volts ~7.4Volts
Weight : 58± 1g