$10 - $49.99

After the huge success of the Turnigy Evolution, the engineers at Turnigy listened to customer feedback, went back to the drawing board, and came up with the exciting Turnigy Evolution PRO. As with the Evolution, the Evolution PRO is designed with the drone flier in mind and is still amazingly compact for easy backpack transportation.

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

ナイトセイウチのためのスペアパーツ - メインウィング

ナイトセイウチのためのスペアパーツ - 胴体

Hobbyking 1875ミリメートルB-17 F / Gフライングフォートレス（V2）（シルバー） -交換用胴体1350ミリメートル（53.33in）

Hobbyking 1875ミリメートルB-17 F / Gフライングフォートレス（V2）（シルバー） -交換用メインウィング1875ミリメートル（72.25in）

Hobbyking 1875ミリメートルB-17 F / Gフライングフォートレス（V2）（シルバー） -交換用垂直安定板

1875ミリメートルのB-17をHobbyking F / Gフライングフォートレス（V2）（シルバー） -交換用エンジンのカウリング。

The FQ777-126 is the ultimate FPV hexacopter drone. This hexacopter drone is small and light enough to fit literally anywhere! In fact, it is so small it even fits and charges within a special compartment within the Transmitter making it small enough to fit into your pocket.

Not only does the Tx double up as a handy storage compartment, but it also charges the LiPo battery whilst on the move. The Spider mini hexacopter FQ777-126 drone is fitted with a 6 axis gyro making it stable and easy to fly indoors or outdoors when recording on your mini HD camera.

Replacement X axis stepping motor for Malyan M180 dual head 3D printer.

Turnigy high quality silicone wire is ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. Available in a wide variety of gauges and colors to suit just about any application. 

各セルは厳選され、究極の品質に合わせて調整されているため、今日の高性能モデルに必要なパワー、耐久性、ランタイムを実現します。各パックは、組み立ての各段階でチェックおよびテストされ、最高の品質が保証されます。この注意深いマッチングとチェックのプロセスにより、パックは最大140Cの驚異的な放電率を達成できます。あなたがバッテリーからパフォーマンスの最後の一滴を絞る必要がある目の肥えたレーサーまたはハードコアバッシャーであるなら、これはあなたのためのパックです！

ジュラフライゴブリンレーサーの交換用胴体 (イエロー/ブラック/シルバー).

イエロー/ブラック/シルバーの Durafly ゴブリンレーサーの交換用テールプレーンとエレベーター。

Replacement fuselage for the Durafly Goblin Racer in Pink/Blue/Black.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Drive Shaft Support Set.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement CNC Aluminum Rudder Assembly w/Plastic Mounting Bracket.

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Stainless Steel Turn Fins w/Mounting Set.

A replacement fuselage with canopy for the Volantex Ranger 1600, and Ranger 2000 electric gliders.

Volantex Ranger 1600 and Phoenix 1600 Replacement Fin/Rudder/Horizontal Stabilizer.

A replacement fin, rudder, and horizontal stabilizer for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex Ranger 2400 and Phoenix 2400.

Volantex Phoenix 2400/Ranger 2400 Replacement Camera Mount Canopy.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement fuselage for the AVIOS KingTwin 1700 with factory-applied decals. Please note that the cockpit/hatch cover is not included with this item.

A replacement wing center section for the AVIOS KingTwin 1700 with factory-applied decals, and wiring. 

A replacement left-hand wing panel for the AVIOS KingTwin 1700 with factory-applied decals, aileron, spars, and latching catch.

A replacement pair of horizontal stabilizers for the AVIOS KingTwin 1700 with factory-applied decals, elevators, and spars.

A complete set of replacement servoless retracts with dummy oleos and wheels for the AVIOS KingTwin 1700.