航空機

This palm-sized micro helicopter is packed full of features to help make it fun and relatively easy to fly. The flybarless system coupled with the 6-axis gyro stabilization unit gives it a stability not seen in many helicopters of this size before. The included 2.4GHz transmitter gives you full control of the helicopter. It allows you to climb or descend, fly backward and forwards, fly left and right, and rotate left and right. You can also select whether you wish to fly Mode 1 or Mode 2, and also there is a switch to increase or decrease the amount of rudder authority.

These 3 bladed propellers are a direct replacement for the AVIOS Albatross and AVIOS BushMule airplanes.

A replacement set of nacelle protection skid plates for the series of H-King Avro Lancasters, these will fit versions 1, 2, and 3.

このバージョンのYak-11はレッドリノレーサーです。これはトータルスケールの配色ではありませんが、大まかにストレガP-51リノマスタングに基づいています。前述のように、レーサーバージョンであるため、純粋な速度のために開発されたパワートレインが付属しています。 6S LiPoパックを使用すると、付属の95A ESCと16x6プロップを備えた5052-550KVブラシレスモーターにより、Yak-11は最大125mphの驚異的な速度で回転します。これは迅速であり、この印象的なサイズのモデルが地面の近くで高速パイロンターンをしているのを見るのは見るべき光景です。曲技飛行もヤクと一緒に演奏するのが夢です。ロールは非常に軸方向であり、パワーが豊富なためループ操作は大きくなります。それが実行する曲技飛行への唯一の制限はあなたの飛行スキルです。

このバージョンのYak-11は、現在ドイツで飛行しているフルサイズに基づいています。配色は、第二次世界大戦でロシア人のために飛行したフランスのユニットを尊重しています。上記のように、ウォーバードバージョンであるため、より多くのトルクのために開発されたパワートレインが付属しています。 6S LiPoパックを使用すると、付属の95A ESCと17x10プロップを備えた5052-410KVブラシレスモーターは、Yak-11に最大100mphの印象的な速度回転をもたらしますが、垂直性能を信じる必要があります。大規模なウォーバードの操縦は、利用可能なトルクとパワーの量で飛行するという夢であり、ローリング操縦は非常に軸方向です。フラップとホイールが下がったスロースケールのようなフライパス、または高速で機銃掃射が少なく、キューバ8の半分または同様の操作で引き上げることで見物人を感動させます。この記念の配色のYak-11は、飛行中または地面に座っているときに、あらゆる角度から見事に見えます。

This is a replacement pre-painted fuselage for the H-King Yak-11 Red Reno Racer.

Note: The motor cowling is NOT included with the fuselage.

This is a replacement pre-painted fuselage with decals for the H-King Yak-11 Commemorative Russian WW2 Warbird.

Note: The motor cowling is NOT included with the fuselage.

This is a replacement pre-painted wing set for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted wing set for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pre-painted horizontal stabilizer for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted horizontal stabilizer for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pre-painted vertical stabilizer for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted vertical stabilizer for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pre-painted canopy and battery hatch for the H-King Yak-11 Red Reno Racer.

This is a replacement pre-painted canopy and battery hatch for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Red Reno Racer.

This is a replacement pair of gear doors, oleo's, and wheels for the H-King Yak-11 Commemorative Russian WW2 Warbird.

A replacement servoless retract unit (1pc) for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

A replacement wing joiner/main spar for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

A replacement hardware set for the H-King Yak-11 Red Reno Racer/Commemorative Russian WW2 Warbird.

This is a replacement decal set for the H-King Yak-11 Red Reno Racer.

A replacement decal set for the H-King Yak-11 Commemorative Russian WW2 Warbird.

This is a replacement spinner for the H-King Yak-11 Red Reno Racer.

This is a replacement motor cowl for the H-King Yak-11 Red Reno Racer.

ホビーキングリノエーシズP-51「ギャロッピングゴースト」のスピードとパワーをさらに高めたいですか？ 次に、このオプションのハイパワーPro 3108-1160KVブラシレスにアップグレードして、無制限の垂直性能を備えた弾道ミサイルに変えます。 付属のプロペラやESCを変更する必要はありません。どちらもこのアップグレードで問題ありません。

A replacement pair of main servoless retracts for the Durafly T-28 Trojan Naval edition. These are not supplied with the oleo legs but they will fit other versions of the Durafly Trojan 1100mm series.

A replacement nosewheel servoless retract for the Durafly T-28 Trojan Naval edition. This is supplied with the wire nose leg and steering arm and will fit other versions of the Durafly Trojan 1100mm series.

A replacement fuselage for the AVIOS Albatross V2, includes factory-applied decals, and water rudder.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement center wing section for the AVIOS Albatross V2, includes the 2 flaps.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement left-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement right-hand outer wing section for the AVIOS Albatross V2, includes decals, aileron, and aileron horn.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement tail set for the AVIOS Albatross V2. This set includes the vertical and horizontal stabilizers, control horns, rudder, rudder servo with pushrod, and decals.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement canopy/cockpit hatch for the AVIOS Albatross V2, includes the clear window glazing.

Note: This is suitable for the Albatross V1, but of course, the colors will be different.

A replacement pair of engine/motor cowls for the AVIOS Albatross V2.

Note: These are suitable for the Albatross V1, but of course, the colors will be different.