航空機

A replacement nosegear steering servo with arm and linkage for the Avios 1600mm Super Tucano.

A replacement 5052-525KV brushless motor with mount and prop adapter for the Avios 1600mm Super Tucano.

A replacement pair of aluminum fuselage wing mounting retaining brackets for the Avios 1600mm Super Tucano.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Dart 250G is the small brother to the popular Dart XL, it is the world's first high-end sub 250g FPV flying wing. With increasing regulations affecting our hobby, it offers an FPV experience without as much hassle as the bigger, heavier models. You will still need to check your country's regulations, some do require you to register a model airplane with a camera on it even when below 250g. The little Dart 250G offers incredible lifting power despite its size, excellent handling, and portability, which makes it the ideal choice for FPV flying in a small package. Features include an optimized airfoil, dedicated equipment bay for flight controller and GPS, nose camera bay, super durable Teflon-covered underbelly, protected leading edge to the wing, and so much more.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

A replacement day bright LED set for the Durafly Tundra V3, would also be suitable for other versions of the Tundra.

A replacement pair of black wing struts for the red/silver 1300mm Tundra V3 "Inspire".

A replacement 7x6 propeller for the Durafly Goblin Racer.

在EFX Racer取得成功后,公司决定生产一款迷你版,正如人们所说,好东西总是小包装,于是MFX Racer诞生了。MFX的设计标准与它的“大哥”们完全相同,依然具有速度、力量、灵活性和稳定性,完全符合您对Durafly模型的期待。此外,您还可以享受Durafly EPO模型独有的组装简易性和质量。

MFX Racer的零件数量和组装时间都极少,只需不到充电时间就能完成组装。MFX Racer在4S设置下速度很快,但仍然感觉异常稳定,给飞行员一种锁定感。然而与大多数高速飞行器不同,它还具有出色的低速操控性。凭借其4通道控制,MFX Racer也非常适合特技飞行,大回环、快速翻滚、刀锋、急停和旋转,MFX Racer都能做到,唯一的限制就是您这个飞行员! MFX有2种翼尖选项(两种都随附在包装盒中),一种是标准的815mm选项,另一种是715mm的剪翼选项。标准的机翼设置可提供更好的爬升率,而剪翼设置则可显著提高翻滚率。

A replacement horizontal stabilizer with elevators for the orange Durafly MFX Racer.

A replacement fuselage with battery hatch, rudder, and decals for the orange Durafly MFX Racer.

A replacement battery hatch for the orange Durafly MFX Racer.

A replacement motor cowl for the orange Durafly MFX Racer.

A replacement canopy, and underbelly skid for the orange Durafly MFX Racer.

A replacement decal set for the orange Durafly MFX Racer.

A replacement fuselage for the 680mm Gold/White Durafly Rare Bear Reno Racer with dummy engine and screws. 

A replacement nose landing gear retract unit for the Avios 1600mm Super Tucano (1pc).

A replacement main landing gear retract unit for the Avios 1600mm Super Tucano (1pc).

A replacement pre-painted fuselage nose section for the HobbyKing Sports Hawk 105mm EDF Jet.

A replacement pre-painted fuselage for the HobbyKing Sports Hawk 105mm EDF Jet.  Please note:  This part does not include the nose section. 

A replacement pre-painted left-hand wing panel with plastic parts for the HobbyKing Sports Hawk 105mm EDF Jet. 

A replacement pre-painted right-hand wing panel with plastic parts for the HobbyKing Sports Hawk 105mm EDF Jet.  

A replacement set of pre-painted all-flying horizontal stabilizers for the HobbyKing Sports Hawk 105mm EDF Jet (2 pcs). 

A replacement pre-painted vertical stabilizer for the HobbyKing Sports Hawk 105mm EDF Jet. 

A replacement wing joining tube for the HobbyKing Sports Hawk 105mm EDF Jet.

A replacement screw set with a hex key for the HobbyKing Sports Hawk 105mm EDF Jet.  

A replacement pushrod set with screws and nuts for the HobbyKing Sports Hawk 105mm EDF Jet (4pcs). 

A replacement pair of main landing gear units with oleos and lightweight wheels for the HobbyKing Sports Hawk 105mm EDF Jet. 

A replacement nose landing gear unit with oleo and lightweight wheel for the HobbyKing Sports Hawk 105mm EDF Jet. 

A replacement battery, and access hatch with canopy for the HobbyKing Sports Hawk 105mm EDF Jet. 

A replacement canopy/battery hatch for the Durafly D.H.100 Vampire V3 RCAF silver edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.