航空機

当 Durafly 推出最初的 Auto-G 时，作为市场上第一款即插即用自动旋翼机，它提高了标准，而 Auto-G2 V2 的推出则进一步提高了标准。秉承 Durafly 的传统，它组装快速简单，飞行性能极佳，飞行时的外观也令人惊叹。V2 的升级包括增加了耐用的 2 毫米纤维增强尼龙头板、纤维增强推杆、全包裹式主桅杆、更宽、更坚固的起落架（带大型轻质轴套式泡沫轮）和罩式发动机，以及更小的内部电子设备，为飞行电池提供了更大的空间。

The Hobbyking H-King Mini L-39 has been developed from an earlier version that had a 50mm fan unit. This latest rendition from RC L39 aircraft sports an uprated 64mm 8-blade EDF fan unit with a 2220-3300KV brushless outrunner motor, a 50A ESC, and uses a 4S LiPo battery instead of the original 3S setup. The full-size L-39 jet was designed in the Czech Republic as a high-performance jet trainer for performing basic to advanced pilot training. It was the first trainer aircraft in the world to be equipped with a turbofan.

A replacement main wing for the H-King Mini L-39 Albatros 64mm. Please note that the wing tanks are not supplied with the wing.

A replacement fuselage w/access hatch for the H-King Mini L-39 Albatros 64mm.

A replacement Horizontal and Vertical Stab for the H-King Mini L-39 Albatros 64mm.

A replacement canopy/battery hatch for the H-King Mini L-39 Albatros 64mm.

A replacement pair of tip tanks for the H-King Mini L-39 Albatros 64mm.

A replacement 64mm EDF with a 2220-3300KV brushless outrunner motor for the H-King Mini L-39 Albatros 64mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

A replacement 11x7 propeller for the Durafly Gloster Gladiator Mk1.

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

A complete replacement fuselage for the Durafly Auto-G2 V2 Gyrocopter with decal.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement horizontal stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of wooden mast supports with linkage rods and screws for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A complete replacement Auto-Start system including motor, gearbox, flexi-shaft drive, etc for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement battery hatch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 4018 800KV brushless outrunner for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 blade grip assemblies for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main rotor plate for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement set of 3 main blades with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement main landing gear for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement pair of 90mm foam main wheels with retainers for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement tail wheel assembly for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement head button for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement spinner nut for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement motor cowl for the Durafly Auto-G2 V2 Gyrocopter.

A replacement set of fiber-reinforced pushrods for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement mast fairing with fixing screws for the Durafly Auto-G2 V2 Gyrocopter.

A replacement Auto-Start switch for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement 20A brushless ESC for the Durafly Auto-G2 V2 Gyrocopter includes an XT60 connector and the JST connector for the Auto-Start system.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement vertical stabiliser with decals for the Durafly Auto-G2 V2 Gyrocopter.

Please note: Although a different color scheme, this replacement part is a suitable replacement for previous versions of the Auto-G2.

在 EFX Racer 取得成功后，Durafly 决定生产迷你版，俗话说，好东西都是小包装的，于是 MFX Racer 诞生了。MFX 在设计上采用了与大型飞机相同的严格标准，并且仍然具有速度、强度、灵活性以及您对 Durafly 型号所期望的稳定性。此外，您还能享受到只有 Durafly EPO 型号才能提供的简单组装和高质量。

A replacement fuselage with rudder for the green Durafly MFX Racer.