Connecteurs

JST-SH 3Pin Socket (Surface Mount) (5pcs)

Bien que ce soit douille de montage en surface, il peut également être utilisé avec l'extension mince fils conducteurs. Les connexions soudées doivent être protégées par thermorétractable chemisage.

Il y a beaucoup d'applications pour ces prises de l'utilisation des cartes de commande robotiques pour la fixation des connecteurs sur les contrôleurs de vol. Ils viennent dans un certain nombre de numéros de broches.

Spécifications:
Type: Homme
Nombre de broches: 3
Pin Espacement: 1mm
Socket Taille: 5.5x4.5x3.1mm

JST-SH 5Pin Socket (Surface Mount) (5pcs)

Bien que ce soit douille de montage en surface, il peut également être utilisé avec l'extension mince fils conducteurs. Les connexions soudées doivent être protégées par thermorétractable chemisage.

Il y a beaucoup d'applications pour ces prises de l'utilisation des cartes de commande robotiques pour la fixation des connecteurs sur les contrôleurs de vol. Ils viennent dans un certain nombre de numéros de broches.

Spécifications:
Type: Homme
Nombre de broches: 5
Pin Espacement: 1mm
Socket Taille: 7.5x4.5x3.1mm

JST-SH 6broches Socket (Surface Mount) (5pcs)

Bien que ce soit douille de montage en surface, il peut également être utilisé avec l'extension mince fils conducteurs. Les connexions soudées doivent être protégées par thermorétractable chemisage.

Il y a beaucoup d'applications pour ces prises de l'utilisation des cartes de commande robotiques pour la fixation des connecteurs sur les contrôleurs de vol. Ils viennent dans un certain nombre de numéros de broches.

Spécifications:
Type: Homme
Nombre de broches: 6
Pin Espacement: 1mm
Socket Taille: 8.5x4.5x3.1mm

JST-SH 8Pin Socket (Surface Mount) (5pcs)

Bien que ce soit douille de montage en surface, il peut également être utilisé avec l'extension mince fils conducteurs. Les connexions soudées doivent être protégées par thermorétractable chemisage.

Il y a beaucoup d'applications pour ces prises de l'utilisation des cartes de commande robotiques pour la fixation des connecteurs sur les contrôleurs de vol. Ils viennent dans un certain nombre de numéros de broches.

Spécifications:
Type: Homme
Nombre de broches: 8
Pin Espacement: 1mm
Socket Taille: 10.5x4.5x3.1mm

JST-SH 4Pin Socket (Surface Mount) (5pcs)

Although this is a  surface mount socket it can also be used with thin extension wire leads. The soldered connections must be protected with heat shrink sleeving.

There are lots of applications for these sockets from using on robotic control boards to fixing connectors on flight controllers. They come in a number of different pin numbers.

Specs:
Type: Male
Number of Pins: 4
Pin Spacing: 1mm
Socket Size: 6.5x4.5x3.1mm

JST-SH 5Pin Female Plug with 200mm Wire Pigtail (5pcs)

JST-SH 8Pin Female Plug with 200mm Wire Pigtail (5pcs)

These plugs come fitted with 200mm wire tails.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

JST-SH 5Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 5
Pin Spacing: 1mm

JST-SH 6Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 6
Pin Spacing: 1mm

JST-SH 8Pin Female (Plug and Crimp) (5pcs)

These plugs come with crimp style pins.

There are lots of applications for these plugs from using with robotic control boards to fixing plugs for flight controllers. They come in a number of different pin numbers.

Specs:
Type: Female
Number of Pins: 8
Pin Spacing: 1mm

NOUVEL ARTICLE

XT60's have been around for some time now.  These now come with a mounting base that can be screwed down to the mounting base of your drone or any other product that has a solid base. This will make connecting your battery even easier. They come in a 5 pack of male connectors making it easy to connect to your PDB or ESC's and are in a fashionable black. Made from the same high-quality nylon as the original yellow XT60, these connectors can withstand up to 60A continuous without overheating, deforming or breaking apart.

This neat adapter is perfect for converting your balance plug to a 2 pin JST connector, ideal for connecting lights and other auxillary components.

This neat adapter is perfect for converting your balance plug to a 2 pin JST connector, ideal for connecting lights and other auxillary components.

Use these female JST-SH with your flight controller, VTX, cameras, and more. These picoblade-compatible pins can repair cables or help you make your own.

Use these female JST-SH with your flight controller, VTX, cameras, and more. These picoblade-compatible pins can repair cables or help you make your own.

Use these female JST-SH with your flight controller, VTX, cameras, and more. These picoblade-compatible pins can repair cables or help you make your own.

Use these female JST-SH with your flight controller, VTX, cameras and more. These picoblade-compatible pins can repair cables or help you make your own.

Excellents remplacements de connecteurs EC5/bullet. Fabriqué à partir de connecteurs à ressort en nylon haute température et plaqués or, tous deux inclus dans le moule d'injection au moment de la formation du connecteur. Le XT90 assure une connexion solide à haute intensité, parfaite pour les applications jusqu'à et au-delà de la constante 90A.

No more messing around with heat shrink as these connectors now come with a cable cover that clips into the back of the plug ensuring your solder joint is fully covered. Don't starve your high-amp power system, switch to XT90 connectors today! 

Excellent EC5/bullet connector replacements. Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT90 ensures a solid high-amp connection, perfect for applications up to and beyond 90A constant. 

XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller applications, we have designed the XT30 to meet the needs of the mini-revolution. From 250 class Quadcopters to foamy flyers this is the new standard for you!

Made from high-temp Nylon and gold plated spring connectors, both are included in the same injection mold at the time when forming the connector. The XT30 ensures a solid high-amp connection, perfect for applications up to and beyond 35A constant.

XT30 is the new connector on the block and it is perfect for Mini RC use! Forget about mini JST or Mini T-connectors or even bulky XT60 for smaller applications, we have designed the XT30 to meet the needs of the mini-revolution. From 250 class Quadcopters to foamy flyers this is the new standard for you!

Made from high-temp Nylon and gold plated spring connectors, both are included in the same injection mold at the time when forming the connector. The XT30 ensures a solid high-amp connection, perfect for applications up to and beyond 35A constant.

3.5mm Male/Female bullet on opposing ends.

3.5mm Male/Female bullet on opposing ends.

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

JR Gold Plated Connectors are for JR style plugs. If you have ever had a servo lead where the wire has come off the connector then these contacts are just what you need for a repair. Although you can connect these to wires using a pair of needle nose pliers the best way is to use our JST Crimping Tool.

JR Gold Plated Connectors are for JR style plugs. If you have ever had a servo lead where the wire has come off the connector then these contacts are just what you need for a repair. Although you can connect these to wires using a pair of needle nose pliers the best way is to use our JST Crimping Tool.