Radio / Servos

Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.

The BMS-622DMG digital servo is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. Being digital, the quoted torque is not only when the servo is moving, but also the holding power when the servo arm is stationary and under load. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a silver anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-622DMG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-662MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.2kg and an excellent speed of 0.17 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a red anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-662MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-632MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.6kg and an excellent speed of 0.15 sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-632MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-622MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-622MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-380MAX is perfect for sailplanes, electric-powered gliders, small electric cars, and also as a wing servo as it is only 13mm wide. The servo has an impressive output torque of 4.7kg and an excellent speed of 0.14sec when using a 6V power source. The gear train has helical metal gears, and the ball-raced output shaft has a 25-tooth spline identical to Futaba specs. The BMS-380MAX is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The GS2010MG is a fast (0.10sec), high torque (23.5kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3009MG is a fast (0.09sec), high torque (38kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a fast (0.05sec), high torque (39kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a quick (0.11sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GC3507MG is a very fast (0.07sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a very fast (0.09sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a very fast (0.06sec), brushless, high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No:  GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GD2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.  The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@5V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a fast (0.11sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3507MG is a fast (0.07sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a fast (0.09sec), very high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a fast (0.06sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GB4508MG is a fast (0.08sec), very high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GB4508MG
Torque@6V: 34kg
Torque@8.4V: 45kg
Speed@6V: 0.12sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless 
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

A powerful high torque (23.5kg), metal-geared standard size servo with CNC machined center case and a rotation of 180°,  supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The G3009MG is a very powerful high torque (38kg), metal-geared standard size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: G3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a very very fast (0.05sec), powerful high torque (39kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), extremely powerful high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

8 kg Corona DS538HV Métal numérique Vitesse Servo / 0.12sec / 58g

Modèle: DS538HV
Tension de fonctionnement: 6.0V / 7.4V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.13sec.60º / 0.12sec.60º
Stall Couple: 7kg.cm / 8kg.cm
Taille: 20X40X38.5mm
Poids: 58g
Bande morte: ≤3uSec
Voyage de fonctionnement: 40º / une impulsion latérale 400US voyage
Potentiomètre: 5 curseur / entraînement indirect
Roulement à billes: MR106
Boîte de vitesses: Métal
Fil de connecteur: 300mm
Température de fonctionnement: -20C + 60c

Corona DS558HV Métal numérique Vitesse Servo 14 kg / 58g / 0,18 Sec

Modèle: DS558MG
Tension de fonctionnement: 6.0V / 7.4V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.20sec.60º / 0.18sec.60º
Stall Couple: 12kg.cm / 14kg.cm
Taille: 20X40X38.5mm
Poids: 58g
Bande morte: ≤3uSec
Voyage de fonctionnement: 40º / une impulsion latérale 400US voyage
Potentiomètre: 5 curseur / Direct Drive
Roulement à billes: MR106
Boîte de vitesses: Métal
Fil de connecteur: 300mm
Température de fonctionnement: -20C + 60c

Corona DS-239MG numérique Slim Wing Servo (Metal Gear) 4,6 kg / 0.15sec / 22g

Modèle: DS-239MG
Tension de fonctionnement: 4.8V / 6.0V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.15sec.60º / 0.14sec.60º
Stall Couple: 4.0kg.cm / 4.6kg.cm
Taille: 30X10X34.5mm
Poids: 22g
Bande morte: ≤3uSec
Voyage de fonctionnement: 40º / une impulsion latérale 400US voyage
Potentiomètre: 3 curseur / Direct Drive
Roulement à billes: MR85x2
Boîte de vitesses: Métal
Fil de connecteur: 215mm
Température de fonctionnement: -20C + 60c

4,6 kg Corona CS-239MG Slim-Wing Servo analogique / 0.14sec / 22g


Spec.
Modèle: CS-239MG
Tension de fonctionnement: 4.8V / 6.0V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.15sec.60º / 0.14sec.60º
Stall Couple: 4kg.cm /4.6kg.cm
Taille: 30x10x34mm
Poids: 22g
Bande morte: ≤5uSec
Voyage de fonctionnement: 40º / une impulsion latérale 400US voyage
Potentiomètre: 3 curseur / entraînement indirect
Boîte de vitesses: Métal
Fil de connecteur: 215mm
Température de fonctionnement: -20C + 60c

Corona CS-239HV Analog Slim Wing Servo (Metal Gear) 4,6 kg / .13sec / 22g

Modèle: CS-239HV
Tension de fonctionnement: 6.0V / 7.4V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.14sec.60º / 0.13sec.60º
Stall Couple: 4.0kg.cm / 4.6kg.cm
Taille: 30X10X34.5mm
Poids: 22g
Bande morte: ≤5uSec
Voyage de fonctionnement: 40º / une impulsion latérale 400US voyage
Potentiomètre: 3 curseur / Direct Drive
Roulement à billes: MR85x2
Boîte de vitesses: Métal
Fil de connecteur: 215mm
Température de fonctionnement: -20C + 60c

Corona DS-239HV numérique Slim Wing Servo (Metal Gear) 4,6 kg / .13sec / 22g

Modèle: DS-239HV
Tension de fonctionnement: 6.0V / 7.4V
Courant de fonctionnement: 300mA / 400mA
Vitesse de fonctionnement: 0.14sec.60º / 0.13sec.60º
Stall Couple: 4.0kg.cm / 4.6kg.cm
Taille: 30x10x34mm
Poids: 22g
Bande morte: ≤3uSec
Voyage de fonctionnement: 40º / une impulsion latérale 400US voyage
Potentiomètre: 3 curseur / Direct Drive
Roulement à billes: MR85x2
Boîte de vitesses: Métal
Fil de connecteur: 215mm
Température de fonctionnement: -20C + 60c

Taille: 21.3x11.5x22 mm
Voltage: 4.8v ~ 6v
Poids: 6.2g
Vitesse: 0,08 sec / 60 (4.8V) 0,07 sec / 60 (6.0V)
Couple: 0,6 kg-cm (4.8V) 0,8 kg-cm (6.0V)
Temp de travail: -30C ~ 60C
Bague en Teflon, fil 15cm, moteur coreless
Servo bras et vis inclus

ATTENTION
Ces servos peuvent être trouvés sur eBay et d'autres vendeur asiatique magasins à proximité de ce prix, mais attention, ils ne contiennent pas de composants Taiwan / Japon. HexTronik (les fabricants de ces servos) ont deux normes, l'une est pour la vente locale, et l'autre est la qualité des exportations avec des connecteurs importés et les engrenages de résine en provenance de Taïwan et du Japon.
Notre HXT500 et HXT900 sont uniquement à l'exportation, et non construites pour le marché intérieur.

Parce que nous commandons directement de l'usine en grandes séries, les servos peut parfois être rouge, bleu ou vert, selon ce que nos clients de gros demandés. Ne vous inquiétez pas, la couleur ne signifie pas qu'il est un autre servo.

HXT900, l'un des micro-servos le plus célèbre et la meilleure valeur disponible.
Utilisé par des dizaines de milliers de hobbyiests monde entier. Le HXT900 est le n ° 1 de confiance 9g servo à faible coût.

Caractéristiques:
• Douille en plastique
• fil de 25cm
• Moteur Coreless
• Servo bras et vis inclus

Spécifications:
Taille: 21x12x22 mm / 0.74x0.42x0.78 dans
Tension: 3v ~ 6v
Poids: 9g / 0,39 oz
Vitesse: 0,12 sec / 60 (4.8V)
Couple: 1,6 kg-cm
Temp de travail: -30C ~ 60C
Gears: Type Nylon Blanc

ATTENTION
servos prospectifs similaires peuvent être trouvées sur eBay et autres vendeurs asiatiques, mais attention, ils ne contiennent pas de composants Taiwan / Japon. HexTronik (les fabricants de ces servos) ont deux normes, l'une est pour la vente locale, et l'autre est la qualité des exportations avec des connecteurs importés et les engrenages de résine en provenance de Taïwan et du Japon.
Notre HXT500 et HXT900 sont uniquement à l' exportation, et non construites pour le marché intérieur. Vous ne trouverez pas le même servo de qualité pour moins, partout!