Systèmes de propulsion

Quanum MT moteurs de série sont construits par Spec DYS, bien connus dans l'industrie pour leur qualité et leur performance.

La ligne de MT utilise des roulements NMB de qualité, nombre de pôles élevé pour le couple et le bon fonctionnement et tous ont normalisé des supports universels dans leur taille donnée. Quanum a spec'd les moteurs à aimants N42sh et laminations .2mm pour une efficacité optimale. Le MT ont également de longueur suffisante de fil de moteur pour une coupe pour adapter l'installation, avec des connecteurs de balle inclus et tube de rétrécissement. Une autre grande caractéristique est que Quanum spec'd tous les moteurs à venir avec le matériel de montage en différentes longueurs, ainsi que le concentrateur et les options directes de l'hélice de montage, donc l'installation est un jeu d'enfant.

Chaque moteur est Quanum QC vérifié pour l'équilibre, le vent, la performance et la tolérance mécanique. La marque DYS est bien connu pour leur BE série et la nouvelle ligne de MT spec construit établira de nouvelles normes de valeur vs performance.

Caractéristiques:
• High Power N42sh aimants
• Les paliers de précision NMB
• Tôles .2mm pour une efficacité optimale
• Coupe Ample aux fils du moteur de longueur pour une installation propre
• hélice à montage direct ou le style Hub compatible
• Multi-longueur matériel de montage inclus

Spécifications:
KV (RPM / V): 2000KV
Cellules Lipo: 2-3S
Puissance: 84.4W
Max Amps: 7.6A
Non Courant de charge: 0,6 / 11.1V
Résistance interne: 0.98ohm
Nombre de pôles: 14
Dimensions (Dia.xL): 28 x 17mm
Arbre du moteur: 2mm
prop arbre: 5mm adaptateur prop CW
Poids: 33g
trou espacement de boulon: 16 * 19 M3
Epaisseur des lames: 0.2mm
Magnets: 42SH
Wire: 18AWG
Connecteur: 3.5mm balle

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has a low internal resistance, excellent heat dissipation, and multiple protection features (see features below). It can be easily programmed with the optional pocket-sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force, and 3 Start Modes.

The motor is a powerful, high torque open brush gear 540 motor, brushes can be changed when they wear out and this is matched to a 60amp ESC. The Trackstar Crawler ESC has been specifically designed for RC crawlers and brushed motors. It gives an excellent linear response and driving feel, has low internal resistance, excellent heat dissipation and multiple protection features (see features below). It can be easily programmed with the optional pocket sized LED program card (see related items) with a variety of different settings including; Initial Start Force, Low Voltage Cut-Off, Initial Drag Brake Force, Maximum Reverse Force and 3 Start Modes.

An excellent open carbon brush gear 540 35T motor that has been designed for, and is perfect for RC crawlers. Having the brush gear open means that maintenance, cleaning, and brush changing is a very simple task. The low 1320KV means masses of low down torque which makes it ideal for climbing steep and rough terrain at controllable low speeds.

PROPDRIVE v2 motors are designed to perform right out of the box with tight windings, smooth bearings, correctly rated magnets, precision cut stator, and balanced rotors.

We design and build the PROPDRIVE v2 motors in-house, allowing us to control every aspect of production. We control the entire production line from material sourcing to machining, balancing, and final assembly. PROPDRIVE motors can be trusted to provide years of reliable service at a price every modeler can afford.

Performance Data (5S):
15x6: 796W, 45A, 3338g static thrust
15x8: 970W, 56A, 4151g static thrust
16x7: 1053W, 60A, 4259g static thrust

Performance Data (6S):
13x6.5: 896W, 42A, 3567g static thrust
13x8: 1042W, 50A, 4214g static thrust
14x7: 1170W, 56A, 4439g static thrust

DYS D2225/13 2000KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 2000kv
Max current: 11A
Max power: 122W
Internal resistance: 0.143 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x4/6x5

DYS D2225/19 1350KV Brushless Outrunner Motor

Specs:
Battery: 2~3 Cell /7.4~11.1V
RPM: 1350kv
Max current: 8.2A
Max power: 105W
Internal resistance: 0.203 ohm
Weight: 32g (including connectors)
Diameter of shaft: 3.17mm
Dimensions: 22x25mm
Prop size: 6x5/7x3

31mm Alloy Prop Nut / Spinner Suites 6mm Thread (Anodisé Argent)

Hauteur: 30mm
Largeur: 31mm
Taille de vis: 10mm
Profondeur de filetage: 25mm

31mm Alloy Prop Nut / Spinner Suites 10mm Thread (Anodisé Argent)

Hauteur: 30mm
Largeur: 31mm
Taille de vis: 10mm
Profondeur de filetage: 25mm

31mm Alloy Prop Nut / Spinner Suites 8mm Thread (anodisé noir)

Hauteur: 30mm
Largeur: 31mm
Taille de vis: 10mm
Profondeur de filetage: 25mm

/ Spinner 22mm Alloy 10x1,0 Prop Nut

Alloy Prop Nut / Spinner 22mm M10x1.25

Prop Nut / Spinner 22mm alliage M5x0.8 anodisé noir

Prop Nut / Spinner 22mm alliage M7x1.00 anodisé noir

Prop Nut / Spinner 22mm Alloy 3/8 "-24 anodisé noir

Prop Nut / Spinner 22mm alliage M5x0.8 anodisée rouge

Prop Nut / Spinner 22mm alliage M8x1.00 anodisée rouge

22mm Alloy Prop Nut / Spinner Suites 10mm Thread (anodisés rouge)

Hauteur: 20mm
Largeur: 22mm
Taille de vis: 10mm
Profondeur de filetage: 20mm

18mm Diamètre Motor Mount - Clamp style pour Inrunner Motor

Spec.
Diamètre: 18mm (Fits 130 Taille Inrunner)
Longueur: 31mm
Poids: 8g

Walkera F210 Racing Quad - DEVO-RX713 Récepteur

Référence: F210-Z-25

There's a lot to be said for the simple things in life, and with RC equipment becoming ever more flexible it's a refreshing change to find a simple, 4 channel radio that dispenses with the need for programming before you can use it.

The Turnigy TGY-i4X AFHDS/2A does exactly that and is a great entry level 4-channel telemetry 2.4ghz transmitter that can be switched between 1st and 2nd generation Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology. The Turnigy TGY-i4X has a nice quality look and feel, while the programming is limited to one-switch V-tail/elevon mixing and servo reversing only. The transmitter is capable of being upgraded to up to 10 channels, see manual for details.

An ergonomically designed, ultra slim case design fits comfortably in your hands, an advantage during long flights. Digital trims and easy to read battery indicator LEDs give the TGY-i4X a modern feel with all the essential features you need. With a low profile antenna, the TGY-i4X is easy to transport and store. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers.

The TGY-i4X comes with the TGY-i4X 4-channel receiver and is a superb budget radio for both new and experienced pilots alike!

Features:
• Entry level 4 channel 2.4ghz radio
• One switch V-tail/elevon mixer
• Easy to use servo reversing switches
• Standard Wing/Elevon/V-Tail
• Trainer port
• Simple LED battery indicator
• 1-Button binding

Transmitter Specs:
Channels: 4 (Expandable to 10)
Frequency: 2.40~2.48GHz
Bandwidth: 500KHz
DSC Port: PS2
Output: PPM Charger
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142 RF
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 6V (4 x AA batteries)
Range: 100~300m
Dimensions: 174 x 89 x 190mm
Weight: 335g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Receiver Specs:
Channel: 4
Frequency: 2.40~2.48GHz
Power: 4.5V~6.6V/<30ma
Weight: 13g
Antenna length: 26mm
Dimensions: 45 x 23 x 9mm

Included:
Turnigy TGY-i4X transmitter
Turnigy TGY-i4X receiver
Bind plug
Manual

Requires:
4 x AA batteries

Instruction Manual is available under the "Files" tab.

Durafly™ T-28 Trojan 1100mm V2 - D3536-750kv Motor inc X Mount

Durafly™ Excalibur - Aerostar 3542-800KV Brushless Outrunner Motor

The Aerostar 3542 800Kv motor is a real powerhouse and provides the punch for the Durafly Excalibur, suits the V1 and V2 versions.

If you are looking for amazing performance for a powered glider or warm liner then this motor is a great choice.

Specs:
Size: 3542
KV: 800KV
Shaft Dia: 5.0mm
Bolt holes: 25mm and 19mm
Bolt thread: M3
Weight: 174g
Motor Plug: 3.5mm Bullet Connector