Systèmes de propulsion

R618XL DSM2x 6CH récepteur avec antenne longue et CPPM

La vitamine C est essentielle pour la santé de votre système immunitaire et OrangeRx est vital pour la santé de votre avion, donc nous sommes heureux de vous présenter la série de récepteurs exclusifs HobbyKing ™ OrangeRx R620X à R1220X V2.

Compatible avec tous les émetteurs DSM2 / DSMX d'air 2.4GHz et comportant soit CPPM ou de sortie S.BUS maintenant, la gamme OrangeRx R620Xto R1220X V2 prend les choses au prochain niveau en offrant soit CPPM ou de sortie S.BUS, véritable compatibilité DSMX, télémétrie intégrée et utilise deux antennes offrant une véritable diversité de réception du signal! Ajoutez à cela failsafe programmable sur la liaison, la récupération brun-out ultra-rapide et une large gamme de tension d'entrée. Le résultat final étant une valeur imbattable pour le récepteur de l'avion de l'argent! La nouvelle version V2 est améliorée de commutation d'antenne algorithme et redessiné RF partie d'extrémité avant qui étendent la gamme de commande 2 km ou plus et télémétrie 400m ou plus!

Le tout nouveau CPPM et la fonctionnalité S.BUS est une excellente fonctionnalité pour une utilisation avec multi-rotor contrôleurs de vol comme le KK2.1, APM, MultiWii et d'autres. Ces connexions d'une seule ligne supprimer le poids et le désordre des fils conducteurs supplémentaires pour chaque canal individuel. Ceci est idéal pour une utilisation sur de petits cadres où l'espace est à une prime et garde tout propre câblage. En outre, tous les récepteurs, de R620x à R1220x V2 offrent 12 canaux sur S.BUS et 9 canaux sur CPPM.

Tous les récepteurs offrent télémétrie intégrée fournissant des lectures pour la batterie et pack récepteur tensions, courant, température et moteur RPM. L'utilisation de ces récepteurs, vous pouvez toujours contrôler tous les paramètres critiques de sorte que vous n'avez pas besoin d'acheter un module de télémétrie supplémentaire.

Ils ont des antennes à double diversité, ainsi que deux ports satellites entièrement fonctionnels pour donner une qualité de réception imbattable.

Les essais en vol a démontré des résultats stables et une réception solide et a montré que la OrangeRx R620X à R1220X V2 dépasse la gamme d'autres récepteurs dans la même classe.

récepteurs OrangeRx sont construits à partir de composants d'origine, MCU 32 bits et avec l'état de l'automatisation art SMT pour assurer un produit de qualité à chaque fois. Chaque récepteur unique est fabriqué en utilisant impédance contrôlée PCB avec réglage précis pour assurer la stabilité du signal et portée qui dépasse l'un des produits de Orx de génération précédente.

Tous OrangeRx R620X à R1220X récepteurs V2 sont QC testé en utilisant la plupart des méthodes de date et vérification de la plage a lieu que le récepteur est programmé. Si un récepteur ne peut pas passer le test de portée à ce stade de la production, il ne peut pas être programmé, veiller à ce que 100% des récepteurs finis sont garantis pour fonctionner parfaitement. En fait, tous les récepteurs sont testées 3 fois; lors de la production, les essais et l'assemblage final.

Le OrangeRx R620X à R1220X gamme inaugure une nouvelle ère de la qualité, la fiabilité et la performance de la ligne OrangeRx up.

Caractéristiques: (R820X V2 CPPM)
• Compatible avec DSM2 / DSMX systèmes de radio et de modules 1024/2048 avions
• Les vrais longues antennes de diversité qui peuvent être placés dans des emplacements pratiques dans l'avion
• Facilement remplaçables antennes en utilisant des connecteurs U.FL (non soudés)
• Ultra-rapide récupération brownout et programmé échec mode sans échec
• Large tension d'entrée: 3.7 ~ 9.6V
• 8 canaux PWM
• 9 canaux CPPM
• Très longue portée: contrôle - 2 km ou plus (LOS), Télémétrie - 400m ou plus (LOS)
• télémétrie intégrée pour réelles lectures de temps: température, de tension de batterie, récepteur Pack tension, RPM Moteur, courant
• Si nécessaire, la fonction de télémétrie intégrée peut être désactivée pendant la liaison.

Caractéristiques: (R820X V2 CPPM)
Canaux: 8 PWM 9 CPPM
Tension d'entrée: 3,7 ~ 9.6V
Plage: 2km
Dimensions: 49 x 28 x 15.5mm
Poids: 14g

Compris:
OrangeRx R820X V2 CPPM 8Ch 2.4GHz DSM2 / Compatible Range Receiver complète DSMX
prise bind

*Remarque:
1) Ce n'est pas un / X produit Spektrum DSM2, ni une copie d'un Spektrum DSM2 / X produit. La marque Spektrum et DSM2 / X est une marque de Horizon Loisirs Etats-Unis.
2) Ce n'est pas un produit souterrain Spektrum faux marché noir. qualité OrangeRx est garantie.
3) Acceptée par le MAAA en Australie, voir le MAAA MOP58 à titre indicatif

Le récepteur compact OrangeRx 6ch a été conçu pour les drones de course FPV avec châssis en carbone. L'antenne extra-longue vous permet de les acheminer à l'extérieur du cadre pour une portée étendue et une liaison robuste avec votre émetteur.

Le module émetteur 2.4Ghz OrangeRx offre un moyen simple, pratique et peu coûteux à utiliser votre émetteur compatible JR / Turnigy / Taranis basé sur un module pour lui permettre d'être utilisé avec des récepteurs de type DSM2 et DSMX.

Contrairement à des modules standards qui ont un protocole fixe, cet appareil passe automatiquement entre DSM2 (1024 / 22ms, 2048 / 11ms) et DSMX (22ms, 11ms) pendant le processus de liaison. Il est également possible de sélectionner manuellement à l'aide d'une pression longue sur le bouton d'appairage.

Cette version dispose également d'un changement de firmware majeur qui permet au module de travailler avec plusieurs récepteurs sans reconsolidation.

Il suffit de retirer votre module existant, brancher le module OrangeRx et vous êtes prêt à se lier à des récepteurs DSMX, DSM2.

Caractéristiques:
• Fonctionne avec tout émetteur à base de module compatible JR / Turnigy / Taranis
• Auto et commutation en mode manuel: DSM2 1024 / 22ms, DSM2 2048 / 11ms, DSMX 22ms, 11ms de DSMX
• Facile à accéder à bouton d'appairage
• Facile à utiliser le bouton ID
• Le mode de contrôle de distance (1mW)
• Système de Gamme complète
• Accepte PPM à partir de 4 - 12 canaux
• Sorties de 4 - 12 canaux selon PPM fournis
• Faible consommation de courant

Spécifications:
Compatibilité: émetteurs à base de modules-5 broches de style JR (JR / Turnigy / Taranis compatible) (Non compatible avec Turnigy 9X)
Protocole 2.4Ghz: DSMX / DSM2
Tension d'entrée: 6 - 18VDC
Puissance de sortie: -18dBm
Consommation de courant: 100mA max
Type Radio: système de Gamme complète
Firmware version: 1.2

Comprend:
OrangeRx DSMX / DSM2 / Devo module émetteur 2.4Ghz Compatible
Antenne 2.4Ghz
Pour voir les fichiers manuel s'il vous plaît onglet ci-dessous.

Remarque:
Modules OrangeRx utiliser un ID global unique pour la liaison. Incase des problèmes avec d'autres récepteurs de marque de liaison appuyez sur le bouton "Change ID" sur le module pour changer l'ID du module à une autre valeur unique réservée à ce module. Il y a plus de 4 milliards de ID unique attribué aux modules OrangeRx.

Remarque:
Ce n'est pas un Spektrum DSM2 / X, produit Walkera, ni est une copie d'un produit Spektrum DSM2 / DSMX / Walkera. La marque Spektrum et DSM2 / DSMX est une marque de Horizon Loisirs Etats-Unis. produits OrangeRx ne sont pas le marché noir ou de produits Spektrum faux. qualité OrangeRx est garantie.

La radio télécommandée FLYSKY Paladin PL18 est conçue pour le vol de précision. Il a été conçu pour être intuitif avec une puissante configuration d'écran tactile. Le Paladin est livré avec 18 canaux et le protocole AFHDS 3. Il existe six types de modèles parmi lesquels choisir parmi les avions, les hélicoptères, les planeurs, les ailes delta, les multicoptères et les véhicules d'ingénierie, ce qui en fait une radio vraiment polyvalente. Le package est également livré avec deux récepteurs, les FTr10 et FTr16s.

The FLYSKY Paladin PL18 Remote Control Radio is designed for precision flying. It was engineered to be intuitive with a powerful touch screen setup. The Paladin comes with 18 channels and AFHDS 3 protocol. There are six model types to choose from Airplane, Helicopter, Glider, Delta Wing, Multicopter, and Engineering Vehicles making for a truly versatile Radio. The package also comes with two receivers, the FTr10 and FTr16s.

Le FrSky X-Lite Pro est une version améliorée du X-Lite. Le X-Lite Pro présente tous les avantages de la conception X-Lite avec les caractéristiques des radios traditionnelles de taille normale. Il bénéficie désormais de l'avantage supplémentaire du nouveau protocole ACCESS (Advanced Communication Control, Elevated Spread Spectrum).

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

The FTr10 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a double-antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr10 is a small, lightweight 2.4GHz receiver that will accept a wide input voltage of between 3.5~18V, has an incredible range in interference-free open areas of up to 10km, and its unique design includes i-BUS, S-BUS, PPM, PWM, and UART data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18 radio system. With all these features it is the perfect choice for drone flying, drone racing, FPV, and other long-range applications.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The FTr4 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr4 is a small, lightweight 2.4GHz receiver that will accept an input voltage of between 3.5~8.4V, has a range in interference-free open areas of up to 500m, and its unique design includes i-BUS, S-BUS, PPM, and PWM data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18, and NB4 radio systems. With all these features it is the perfect choice for drone flying, gliding, and small fixed-wing aircraft.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

The best just got better, the RADIOMASTER TX16S MKII is the ultimate open-source radio. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, redesigned battery cover, and improved knobs and sliders that are smoother with a better center ident.

The TX16S MKII transmitter supports EdgeTX and OpenTX open source firmware which is fully supported by the OpenTX development team. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. The TX16S MKII is available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The best just got better, the RADIOMASTER TX16S MKII is the ultimate open-source radio. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, redesigned battery cover, and improved knobs and sliders that are smoother with a better center ident.

The TX16S MKII transmitter supports EdgeTX and OpenTX open source firmware which is fully supported by the OpenTX development team. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. The TX16S MKII is available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The FrSky FLVS ADV sensor is designed to measure the battery voltage of 2S~8S Li-Po batteries at 0.01V voltage resolution. The data can be transmitted via the F.Port or Smart Port (S.Port) of telemetry-enabled receivers such as the FrSky X8R, X6R, X4R, etc to compatible transmitters, such as the Taranis or other OpenTx radios. This is an obvious choice for accurate measurement of large-capacity Li-Po batteries.

FrSky has enhanced the performance and capability of its original sensors, resulting in the development of the new ADVANCE (ADV) series. All ADV sensors fully support the FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with an FBUS-capable receiver which further simplifies model builds.

The Archer line of receivers has been enhanced further with the Plus Series, they include some exciting new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, they also feature ACCESS and ACCST D16 modes where the RF protocol is smart matched during the binding process. Another feature is a Black-Box function, which records basic flight details such as power and signal-related data.

The FrSky Plus SR8 receiver is designed for use in RC airplanes, it works as a traditional 8-Channel PWM Rx, but it also has a built-in 3-axis gyro and a 3-axis accelerometer sensor module. With the built-in sensors, the Plus SR8 will compensate for outside forces on the airplane and will enhance the stability making it easier and smoother to fly. The Plus SR8 supports multiple flight modes, Auto-level, Stabilisation, Hover, and Knife-Edge. Also available are several configuration methods, these include LUA, or the FrSky S.port Airlink+ combined with the Freelink App.

The FrSky High Precision Vario Sensor monitors atmospheric pressure and reports altitude and changes in pressure, this will indicate where the lift is which is invaluable if you want to find thermals with your RC glider.

The advanced high-precision variometer sensor calculates the altitude from atmospheric pressure, the atmospheric pressure drops as you rise in altitude. Using this change in pressure the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. This unit has been designed to be used in conjunction with FrSky telemetry-enabled transmitter and receiver system.

This advanced telemetry sensor incorporates a GPS module to provide useful variable directional information such as position, speed, distance, altitude, and UTC time. It can then be displayed in real-time on FrSky's Taranis transmitters, this can also be logged onto the radio's SD card. This location data is particularly useful for "lost aircraft situations" providing you with the coordinates of your lost model if it's still in radio range or its last known position if not.

The ADV series GPS sensor provides accurate time synchronization with GPS satellites, working with the integrated “Auto adjust from GPS” function in the ETHOS system. This ensures the radio and its telemetry are all in sync with an accurate time system, ensuring telemetry data is in sync with UTC time. This sensor will only work with the FrSky F.Port and Smart Port-enabled receivers. It does not provide autonomous GPS navigation or an RTH mode for your model; it is purely to provide data to your radio.

The best just got better, the RADIOMASTER TX16S Max MKII OpenTx radio has been created to be the best radio in its class without compromising anything. It is still a high-end, low-cost, OpenTx radio that has many great features, and this version includes the powerful long-range ELRS protocol. With the MKII you get many new features, these include, improved internal circuitry, V4.0 Hall sensor gimbals for improved centering, improved ergonomics, retooled Tx body shell for improved fit and finish, redesigned battery cover, improved knobs and sliders that are smoother with a better center ident. The TX16S Max MKII is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

Want to experience the efficiency, long range, and low latency of the ELRS protocol without purchasing a new radio? Then RADIOMASTER has you covered!

The Ranger Nano 2.4GHz ELRS module represents the cutting edge in ELRS technology, and it's compatible with the RADIOMASTER Zorro series and more. It features F-1000Hz refresh rates, a high-efficiency cooling system, WiFi, and Bluetooth connectivity, and a T antenna. Enjoy all that ELRS has to offer with a RADIOMASTER Ranger Nano TX module.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.