Systèmes de propulsion

The ER6G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

Want to experience the efficiency, long range, and low latency of the ELRS protocol without purchasing a new radio? Then RADIOMASTER has you covered!

The Ranger Nano 2.4GHz ELRS module represents the cutting edge in ELRS technology, and it's compatible with the RADIOMASTER Zorro series and more. It features F-1000Hz refresh rates, a high-efficiency cooling system, WiFi, and Bluetooth connectivity, and a T antenna. Enjoy all that ELRS has to offer with a RADIOMASTER Ranger Nano TX module.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RADIOMASTER MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by the EdgeTX and ExpressLRS multi-module project. The MT12 is available as either an ELRS or 4-in-1 multi-module version (see specs) and boasts 10 physical inputs, and the capability to handle either 16 or 32 channels (4-in-1 version only). The ELRS (ExpressLRS) version is designed to provide a reliable long-range, ultra-fast response, super low latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm. Each version is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

Compatible avec Futuba Fasst transmetteurs de la Corona R14FA offre une alternative abordable pour les utilisateurs de radio Futaba.

Spécifications:
Courant de fonctionnement:
70mA @ Mode FASST de 7ch normal et 110 mA max,
80mA @ mode multi-canal FASST normal et 110 mA max
Tension de fonctionnement: 4.0 ~ 10V
Latence:
7MS pour la grande vitesse PPM (HS), 14ms pour le mode à faible vitesse PPM (LS) @ FASST multi-canal,
8ms pour la grande vitesse PPM (HS), 16 ms pour la basse vitesse PPM (LS) @ FASST Mode 7ch
Sensibilité: -96dBm ~
Fail Safe: Oui
Taille: 53x37x16mm
Poids: 22g
Longueur de l' antenne: 136mm

Compatibilité:
FUTABA FASST émetteurs 2.4GHz
TM7, TM8, TM10, TM14, 6EX-2.4G, 7C-2.4G, 8FG, 10CG, 12FG

Montez cet appareil à portée de main quelque part sur votre modèle où on peut voir clairement et le brancher sur un canal libre sur votre récepteur, si aucun canal est disponible, utiliser un cordon Y. Cette unité vous donnera un contrôle visuel de votre LiPoly ou récepteur LiFe batterie à chaque fois que vous allumez. Le facile à lire la série de LED vous indique s'il est sûr de continuer ou si la batterie doit être rechargée.

Spécifications:
Plage de tension: 6.6 ~ 7.4V
Dimensions: 40x21x2.5mm
Poids: 4g
Longueur cordon: 320mm
Fiche: Type JR

L'adaptateur Board Converter RMILEC est la solution idéale pour permettre une connexion facile à un récepteur SBUS. L'adaptateur de T4363NB18 supporte 5V et peut être utilisé non seulement pour faire correspondre 12FG ou 14MZ émetteurs, mais peuvent également être placés individuellement dans un autre emplacement en tant que station relais.

Le conseil d'administration est fourni avec le matériel, y compris, les connecteurs de la batterie JST, interrupteur marche / arrêt, terminaux, équipements et accessoires.

S'il vous plaît noter: soudure de commutateur marche / arrêt et des bornes est nécessaire.

Spécifications:
Matériel: PCB
Poids: 39.65g
Dimensions: 90 x 115mm

FrSky TFR6 7ch 2.4GHz FASST Compatible

Compatibilité:
FASST 2.4G: Air Systems (Mode 7CH / Mode Multi)
FrSky Modules TF: TF-8M, TF-14M


Caractéristiques:
Poids léger et de petite taille
Deux options de réglage failsafe sélectionnables


Caractéristiques:
Nombre de canaux: 7
Plage de fonctionnement Tension: 3,5V ~ 10V
Température de fonctionnement: -10C ~ 60C
Dimension: 37 * 22 * 8mm
Poids: 7.8g

La tension Protector Turnigy aide à prévenir votre récepteur de tomber en dessous de sa tension de fonctionnement requise. Cela aide à éliminer les «outs brunes» et empêche votre récepteur de redémarrer. Il aidera également à réduire la charge sur BEC de votre ESC et de réduire la probabilité de glitching. Il suffit de le brancher sur un canal libre sur votre récepteur.

Tension de fonctionnement: 3.2V - 11.1V (1s ~ 3s LiPo)
Tension de condensateur: 16v
Capacité de stockage: 3300uf
Poids: 6.1g

Le FrSky S.BUS PWM Decoder vous permet d'utiliser tout analogique standard ou servos numériques avec votre récepteur compatible S.BUS. Ceci élimine la nécessité d'utiliser des servos spécifiques de S.BUS cher vous permettant d'utiliser vos modèles servos existants.

Avec 4 sorties de canaux programmables, vous pouvez indépendamment affecter chaque servo à un canal de votre choix tout en ayant seulement pour connecter un câble d'entrée de votre récepteur. Cela rend votre câblage beaucoup plus rangé et permet facilement mise en place de votre servos sans la nécessité d'exécuter plusieurs rallonges.

Ceci est un excellent appareil à utiliser en conjonction avec nos récepteurs compatibles orange 7CH et 9CH S.BUS!

Comprend:
FrSky S.BUS à PWM Decoder

Spécifications:
Canal Sorties: 4 programmables
Canal Ouput Lead Longueurs: 200mm
Longueur totale: 350mm

* Note: FrSky Servo Changeur canal requis (vendu séparément, voir articles apparentés ci - dessous) pour modifier l' affectation des sorties de canal.

Protégez votre récepteur OrangeRx contre les dommages et les vibrations avec cette protection en silicone shell.Fits snuggly autour de la plupart des récepteurs satellite non et il a des trous de sortie à l'arrière et sur le côté pour les antennes.

Spécifications:
Longueur: 44.5mm
Largeur: 25mm
Hauteur: 16mm
Poids: 6g

Protégez vos récepteurs orange du carburant ou accident dégâts avec Orange RX en caoutchouc de silicone
Coquille. La coque offre une protection supplémentaire pour le cœur de votre modèle RC tout en fournissant également
options de fixation supplémentaires. L'arrière de la coque a une fente pour permettre l'utilisation du crochet et boucle sangles de fixation, des fentes supplémentaires sont fournies pour l'antenne satellite et le port de votre récepteur.

Spécifications:
Récepteur Adapté: Orange R620
Matériel: Le caoutchouc de silicone
Couleur: Noir
Dimensions: 46 x 25 x 17mm
Poids: 4.4g

Protégez votre récepteur OrangeRx contre les dommages et les vibrations avec cette protection shell.Fits silicone snuggly autour de la plupart des récepteurs satellite et il a un trou de sortie à l'arrière de l'antenne et une découpe sur le côté de la fiche du récepteur satellite.

Spécifications:
Longueur: 47.5mm
Largeur: 25mm
Hauteur: 16mm
Poids: 8g

Protégez vos récepteurs orange du carburant ou accident dégâts avec Orange RX en caoutchouc de silicone
Coquille. La coque offre une protection supplémentaire pour le cœur de votre modèle RC tout en fournissant également
options de fixation supplémentaires. L'arrière de la coque a une fente pour permettre l'utilisation du crochet et boucle
sangles d'arrimage, des emplacements supplémentaires sont prévus pour l'antenne double.

Spécifications:
Récepteur Adapté: Orange R615
Matériel: Le caoutchouc de silicone
Couleur: Noir
Dimensions: 46 x 22 x 15mm
Poids: 3.5g

Protégez vos récepteurs orange du carburant ou accident dégâts avec Orange RX en caoutchouc de silicone
Coquille. La coque offre une protection supplémentaire pour le cœur de votre modèle RC tout en fournissant également
options de fixation supplémentaires. L'arrière de la coque a une fente pour permettre l'utilisation du crochet et boucle
sangles d'arrimage, des emplacements supplémentaires sont prévus pour l'antenne double.

Spécifications:
Récepteur Adapté: Orange R620
Matériel: Le caoutchouc de silicone
Couleur: Noir
Dimensions: 43 x 25 x 16mm
Poids: 5g

Pièce de rechange - Premium BNC câble 1.3m de RG223 pour Scherrer Rx700LR Long Range système UHF

Pièce détachée - Adaptateur RC Graupner / JR pour Scherrer Rx700LR système UHF longue portée

Pièce détachée - RC Multiplex Adaptateur pour système Scherrer Rx700LR Long Range UHF

Pièce détachée - Nu adaptateur RC (vous mettez votre propre adaptateur) pour le système Scherrer Rx700LR Long Range UHF