Batteries/Chargeurs

This adapter will convert an HXT 5.5mm bullet equipped battery to an XT90 for use with an XT90 equipped ESC or an XT90 Charge lead.

This adapter will convert an XT90 equipped battery to an HXT 5.5mm bullet for use with an HXT 5.5mm bullet equipped ESC or an HXT 5.5mm bullet Charge lead.

Use this adapter lead to charge batteries with 4MM Bullet Connector plugs, even those with reversed polarity Connectors using the supplied adaptors.

A Parallel Harness is a common way to double the capacity rating (mAh) while keeping the same voltage.

XT30 Male Connector w/24AWG Silicone Wire 55mm (1pc).

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

Suitable extension leads for Turnigy lipo batteries.

One end has an XT60 male connector and the other end has a Micro Losi male connector.

4mm Solder Type Banana/Charge Plug (2 pairs).

XT60 Male to 2 x DC Jack Plug Connectors 220mm (2pcs)

Specs:
Connector 1: XT60 Male
Connector 2: 2 x DC Jack Plug
Length: 220mm
Weight: 16.7g each
Quantity: 2pcs

These are good quality balance lead extensions with a 5S JST-XH male connector on one end and a female on the other.

Le SKYRC IMAX B6 a toujours été un chargeur avancé populaire, capable de charger, équilibrer et décharger les batteries LiIon, LiPo, LiFe (A123), NiCd, NiMH et Pb, avec le V2, il est maintenant encore meilleur. Il est contrôlé par microprocesseur comme tous les meilleurs chargeurs et équilibrera les cellules individuelles de vos batteries Li-XX et bien plus encore. Le B6 V2 est un chargeur d'entrée CC uniquement, il nécessite une entrée CC comprise entre 11 et 18 V qui peut être alimentée à partir d'une batterie ou d'une alimentation principale CA.

XT30U Silicone Charge Lead with 4mm Banana Plugs.

XT60 Male w/12AWG 100mm Silicone Wire (5pcs).

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This compact adapter is perfect to convert an HXT3.5mm equipped battery to an XT60, or an XT60 charge lead to HXT3.5mm.

Specs:
Connector 1: HXT3.5mm
Connector 2: XT60 female
Weight: 15g (each)
Quantity: 2pcs

A compact battery adapter to convert a T-Connector battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC5 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC3 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT60 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT90 battery lead to a TR output, compatible with similar types of connectors.

Le ToolkitRC M7AC est un outil polyvalent et multifonction qui intègre des fonctions telles que la charge, la décharge, le cycle, le test de signal/la source de signal (PWM/PPM/SBUS), le multimètre, le chargement intelligent de la batterie du drone grand public, les alertes vocales multilingues personnalisables, et bien plus. Le M7AC est léger et compact, et il dispose d'une alimentation électrique intégrée lui permettant de fonctionner à partir d'une source d'alimentation secteur de 100 à 240 V CA. Il a également la capacité de fonctionner sur une alimentation 7 ~ 28V CC, ce qui est parfait pour charger sur le terrain de vol, la piste de course ou le lac de plaisance.

Le ToolkitRC M4 Pocket est un chargeur d'équilibre ultra-compact de la taille d'une paume, malgré sa petite taille, il peut charger une batterie 1 ~ 4S jusqu'à 80W. Il est simple et intuitif à utiliser, dispose d'un écran LCD couleur IPS grand angle 1,54" x 240 x 240 pixels facile à lire et d'un bouton de programmation simple et unique.