Zone de Remise

Transmetteur de cou adaptateur (Rouge)

Améliorer la stabilité de votre émetteur 2.4ghz avec un de ces adaptateurs pour pendentifs en alliage anodisé CNC. 2 types d'adaptateurs sont fournis ainsi que des vis qui convient à la plupart de la radio.

Learn More

Transmetteur de cou adaptateur (Silver)

Améliorer la stabilité de votre émetteur 2.4ghz avec un de ces adaptateurs pour pendentifs en alliage anodisé CNC. 2 types d'adaptateurs sont fournis ainsi que des vis qui convient à la plupart de la radio.

Learn More

Transmetteur de cou adaptateur (Gunmetal noir)

Améliorer la stabilité de votre émetteur 2.4ghz avec un de ces adaptateurs pour pendentifs en alliage anodisé CNC. 2 types d'adaptateurs sont fournis ainsi que des vis qui convient à la plupart de la radio.

Learn More

vous augmentez RC signal de validité et de réduire votre probabilité de perte de signal dans la fibre de carbone et / ou fuselages 3D ainsi que des plates-formes FPV à longue portée en utilisant le module compatible 6 diversité Canal OrangeRx DSMX / DSM2.

Le / DSMX Compatible 6 Module diversité Canal OrangeRx DSM2 recevra les données de jusqu'à 6 récepteurs satellites, vérifier la validité du signal et délivre le signal valide pour toute interface satellite activée DSM2 / DSMX compatiblereceiver ou via une connexion directe à un drone ou Flybarless Helicopter Flight Manette.

L'appareil peut être alimenté à partir de 5V externe ~ 8.4V ou directement depuis le port satellite de 3.3V et intègre une fonction de liaison permettant satellites à être lié sans utiliser récepteur supplémentaire.

Caractéristiques:
• Six ports satellites
• Alimenté par port satellite Rx ou connexion d'alimentation externe
• port satellite Rx peut être utilisé pour alimenter l'unité et les satellites connectés
• Dip basculer entre les modes de fonctionnement sélectionnables
• salons d'indication LED qui satellite est active

Spec:
Modes de fonctionnement: DSM2 (1024 / 22ms, 2048 / 11ms), DSMX (22ms / 11ms)
Alimentation: externe 5V ~ 8.4V ou 3.3V via le port satelite

Learn More

The Orange OpenLRSng is an open-source receiver that can be programmed to use your choice of protocol and any channel in the 915MHz range. It is a fully user-customizable RF receiver that can even be programmed to utilize additional features such as telemetry, operative remote control via sticks (cPPM ready), and mission control.

Learn More

The Orange OpenLRS 433MHz TX Module is designed for use with APM flight control software and can be programmed to use your choice of protocol and any channel in the 433MHz range. Fully user-customizable, the transmitter system can even be programmed to utilize additional features such as telemetry, operative remote control via stics (cPPM ready), and mission control.
It is equipped with Bluetooth technology so the user can connect it to a tablet, smartphone, or PC. All telemetry data, mission planning, and flight modes will be available in APM Mission Planner on PC or Droid Planner, or similar apps for Android devices. Thanks to the Bluetooth function, no additional leads are required to setup/program the transmitter module.

Learn More

Le récepteur compact OrangeRx 6ch a été conçu pour les drones de course FPV avec châssis en carbone. L'antenne extra-longue vous permet de les acheminer à l'extérieur du cadre pour une portée étendue et une liaison robuste avec votre émetteur.

Learn More

There's a lot to be said for the simple things in life, and with RC equipment becoming ever more flexible it's a refreshing change to find a simple, 4 channel radio that dispenses with the need for programming before you can use it.

The Turnigy TGY-i4X AFHDS/2A does exactly that and is a great entry level 4-channel telemetry 2.4ghz transmitter that can be switched between 1st and 2nd generation Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology. The Turnigy TGY-i4X has a nice quality look and feel, while the programming is limited to one-switch V-tail/elevon mixing and servo reversing only. The transmitter is capable of being upgraded to up to 10 channels, see manual for details.

An ergonomically designed, ultra slim case design fits comfortably in your hands, an advantage during long flights. Digital trims and easy to read battery indicator LEDs give the TGY-i4X a modern feel with all the essential features you need. With a low profile antenna, the TGY-i4X is easy to transport and store. Adjustable length sticks, and a loop for attaching a neck strap round out the list of comfort features this radio offers.

The TGY-i4X comes with the TGY-i4X 4-channel receiver and is a superb budget radio for both new and experienced pilots alike!

Features:
• Entry level 4 channel 2.4ghz radio
• One switch V-tail/elevon mixer
• Easy to use servo reversing switches
• Standard Wing/Elevon/V-Tail
• Trainer port
• Simple LED battery indicator
• 1-Button binding

Transmitter Specs:
Channels: 4 (Expandable to 10)
Frequency: 2.40~2.48GHz
Bandwidth: 500KHz
DSC Port: PS2
Output: PPM Charger
Modulation: GFSK
Spread Spectrum Mode: AFHDS 2A and AFHDS
Band: 142 RF
Number of Frequency Channels: 20
Output Power: <=20dbm
Working Current: <=100mA
Working Voltage: 6V (4 x AA batteries)
Range: 100~300m
Dimensions: 174 x 89 x 190mm
Weight: 335g
Resolution: 1024 bit
Stick Mode: Mode 2 (Throttle Left)

Receiver Specs:
Channel: 4
Frequency: 2.40~2.48GHz
Power: 4.5V~6.6V/<30ma
Weight: 13g
Antenna length: 26mm
Dimensions: 45 x 23 x 9mm

Included:
Turnigy TGY-i4X transmitter
Turnigy TGY-i4X receiver
Bind plug
Manual

Requires:
4 x AA batteries

Instruction Manual is available under the "Files" tab.

Learn More

9114000063-0 Learn More

Easy to use, simply follow the links on the FrSKY website, connect the receiver to the STK and plug the STK into your computer via the USB port. The FrSKY STK updates all FrSKY receivers that support S.Port.

Learn More

The Turnigy X6B is a 6-channel two-way receiver designed for multi-rotor aircraft. It uses the 2.4GHz AFHDS 2A (Automatic Frequency Hopping Digital System) protocol and has a dual omnidirectional antenna with superior noise reduction techniques for reliable interference-free operation. It’s compact, easy to install, and boasts a rich easy-to-use interface. The X6B supports 6-channel PWM output, standard PPM output, and i-BUS support for up to 18 channels alongside a reliable voltage sensor interface. This is an excellent addition to your Turnigy TGY-i6s, TGY-i10, and Evolution transmitters as well as a number of other AFHDS 2A transmitters such as FS-i10, FS-i8, FS-i6, FS-i6S, FS-i6X, FS-i4, and FS-i4X. An excellent receiver for multi-rotor drones as it is lightweight cuts down on cabling and comes with built-in battery monitoring.

Learn More

This receiver was specifically designed by OrangeRx with the FPV racer in mind. Although it is small and ultra-lightweight it has true diversity technology which is especially important for the harsh environment of FPV racing. These racing conditions are far from ideal, low altitude, lots of obstacles, motors, and video transmissions in close quarters, situations where you need a robust reception.

Learn More

This handy programming box for the OrangeRx R620X to R1220X V3 and RR12RDTS receivers is perfect to have in your toolbox at the flying field in case you want to change the settings without the need for a PC. It has an integrated RF module that allows you to set up the receiver wirelessly or you can use a wired connection. As the RR12RDTS is primarily designed for drones and helicopters this programming box can also be used to adjust the settings of the flight stabilization systems.

Learn More

FrSky M7-R hall sensor gimbal is specially designed for FPV racing, 3D and acrobatic fixed wing and 3D Heli pilots who are using the FrSky Taranis Q X7/X7S Transmitter. The 45°throttle travel will allow you to achieve a quick throttle response resulting in precision control.

Learn More

Après l'énorme succès du Turnigy Evolution, l'Evolution PRO est conçu avec le drone à l'esprit et reste incroyablement compact pour un transport facile à dos de sac à dos.

Il existe de nombreuses nouvelles fonctionnalités et mises à jour pour faire de l'Evolution PRO la meilleure radio du marché. Commençant par un interrupteur marche / arrêt repositionné et un nouveau point de fixation de la longe pour une utilisation plus facile. Il y a maintenant des ressorts plus rigides pour aider les bâtons et un écran repositionné afin que les personnes qui sont des «pinceurs» aient un meilleur contrôle des bâtons et l'utilisateur a maintenant accès à l'étalonnage des bâtons. Un bouton momentané a été ajouté, ce qui est idéal à utiliser comme pré-armement sur les quads. Pour ceux qui avaient du mal à entendre le buzzer, le son a été rendu plus fort et il y a un retour haptique. Vous pouvez désormais stocker vingt modèles différents (au lieu de cinq) pour faciliter l'échange de modèles. Le micrologiciel a également été mis à jour à partir de l'Evolution.

Learn More

Designed to be splash-proof, the HK-GT2 receiver is a great choice for boats, cars on muddy terrain and rainy days. Stop changing receivers from model to model and get an extra receiver now.

Learn More

This kit comes complete with the FrSky Taranis X-Lite BRACE. There are also red replacement gimbal stick ends in two sizes, short and long, depending on your needs.

Learn More

Si vous craignez de rayer l'écran de l'Evolution PRO ou d'endommager une manette de commande pendant le transport, cette housse répond à toutes vos exigences. Il se clique simplement sur l'avant de votre manette pour protéger en toute sécurité l'écran et les bâtons. Il vient en noir ou blanc.

Learn More

Si vous craignez de rayer l'écran de l'Evolution PRO ou d'endommager une manette de commande pendant le transport, cette housse répond à toutes vos exigences. Il se clique simplement sur l'avant de votre manette pour protéger en toute sécurité l'écran et les bâtons. Il vient en noir ou blanc.

Learn More

High gain, high sensitivity RF components are used throughout, this coupled with FLYSKY's latest generation intelligent wireless 2.4GHz AFHDS 3 protocol, enables the receiver to reject interference easily, while maintaining high reception rates, and stable performance. This version 2 FGr4 supports PPM, i-BUS, and 4 PWM data outputs (CH1~CH4), and an input for connecting additional sensors. Another feature of this quality FLYSKY receiver is the ability to handle a wide input voltage, anything from 3.5-12V can be used, and the case has a sealing gasket which makes it water-resistant.

Learn More

The FGr8B surface micro receiver adopts FLYSKY's third-generation automatic frequency hopping digital system (AFHDS 3), it is perfectly suited to their range of PL18, NB4, and NB4 Lite transmitters. It uses a single antenna bidirectional transmission system that is uniquely designed to install and output PWM/PPM, and iBUS in signals.

Learn More

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

Learn More

The RADIOMASTER TX12 is a compact, low-cost, OpenTx radio that has many great features. Being compact, it is about two-thirds the size of a traditional transmitter, has a removable antenna, and a folding carry handle, which makes it the perfect option for traveling. Despite its smaller size, it is comfortable to hold due to its well-designed case and improved ergonomic hand grips. This MKII version with upgraded STM32F407 MTU has the cutting-edge EDGETX software pre-installed. This open-source firmware is highly customizable to allow users to configure their transmitters through the supplied USB-C data port to adjust the settings for their individual preferences and specific needs. EdgeTX supports a wide range of RC protocols and is a versatile and powerful tool which makes it extremely popular with the RC community. RADIOMASTER works closely with the EdgeTX team to develop and optimize the user experience and will continue to ensure that the concept and standards are carried forward into the future. Learn More

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

Learn More

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

Learn More

A strong, well-made neck strap that suits a multitude of transmitters including the FrSky X14 series and many, many more. It includes the Turnigy logo, a quick-release connector, and a sliding, clasp to hook onto the transmitter neck strap attachment.

Learn More