Avions

After the success of the original H-King FLYCAT 70mm EDF jet, which was a basic aileron, elevator, and throttle-only model, we now have the FLYCAT V2. This new version has an upgraded power setup with a brushless inrunner motor and Aerostar RVS G2 ESC, twin rudders, a set of pre-installed electronic retracts, and a brand-new high-viz color scheme. It retains from the V1 its stunning streamlined looks, agility, performance, and impeccable flying characteristics.

With a new more powerful setup, the 2860-2100KV brushless inrunner motor and the 12-blade EDF unit make the Flycat V2 not only quite a bit faster, but it improves the verticals and it also sounds amazing, just like a real turbine, especially when doing fast, high-speed passes. Coupled with the motor and EDF unit is one of our Aerostar 80A RVS G2 speed controllers, this not only gives you solid reliability, it also offers you the choice of instant reverse. If you are flying from a hard runway this helps shorten the landing run quite considerably when selected after touchdown. Another feature of the FLYCAT V2 is the twin-rudders, these bring in another dimension when flying the V2. It is now able to perform even more jet-like maneuvers including falling leaves and knife-edge, etc, and they also help in the approach to landing and when flying at slower speeds. The new high-viz color scheme not only looks great, but it stands out well in the sky which helps orientation when flying big, fast aerobatic maneuvers. Last but not least on the V2 there is no need for hand-launching, it comes with a set of pre-installed grass-capable electronic retracts. These robust and reliable retracts enable smooth take-offs and landings on hard and grass runways

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The Yak-11 was designed as an advanced trainer for use by the Soviet Air Force and came into service in 1947. The pilot and instructor sat in tandem under a long canopy that had separate sliding hoods. Although designed as a trainer, Yak-11s were also used in combat during the Korean War, and more recently, highly modified ones have been used very successfully for air racing. The Steadfast was built from scratch as an out-and-out high-performance single-seat racer in Romania in the early 2000s. It was based on the Yak-3, but essentially it looks the same as a Yak-11, so our model is based on our previous Yak-11 model.

The H-King Yak Steadfast is supplied with a power train that has been developed for pure speed. Using a 6S LiPo pack, the 5020-550KV brushless motor with the supplied 85A ESC and 16x6 prop will give it an incredible turn of speed of over 100 mph. It is very quick, and seeing a model of this impressive size doing fast pylon turns near the ground is a sight to behold. Aerobatics are also a dream to perform, the rolls are very axial, and looping maneuvers are big due to the abundance of power. The only limitations to the aerobatics it will perform are your flying skills.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Le Voltigeur est un artiste bien connu et nous venons de passer au niveau supérieur. Voler le Voltigeur est un rêve, en utilisant la batterie LiPo 3S recommandée pour la voltige et le vol sportif, il se manipule comme un entraîneur, docile et extrêmement prévisible, mais il se transforme en une bête 3D avec cette même batterie 3s. Qu'il s'agisse de cercles roulants, de cascades, de busards inversés et de mélangeurs, rien n'arrêtera le Voltigeur.

Le Durafly SlowPoke est un modèle en mousse EPO au design classique. En plus de la conception de vol facile du SlowPoke, Durafly a ajouté des roues plus grandes pour faciliter encore plus le décollage et l'atterrissage sur une grande variété de terrains. Un excellent avion pour votre premier taildragger à aile basse ou pour le pilote expérimenté exigeant qui veut un avion beau et facile à voler.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

Le H-King MX2 Extreme 30E est parfait pour amener un pilote du vol sportif général à la voltige 3D en toute confiance. Il est léger, dispose d'un puissant moteur brushless et de grandes surfaces de contrôle qui le rendent idéal pour les culbutes animées et les types de vol extrêmes et fougueux. Des choses telles que le vol stationnaire, les chutes d'eau, les harriers, le couteau, les cercles roulants et autres acrobaties 3D extrêmes sont beaucoup plus faciles lorsque vous pilotez le MX2 Extreme.

Le H-King Viper 64 est abordable, très stable et possède des qualités de pilotage prévisibles, ce qui en fait le choix idéal pour votre première aventure dans le pilotage de jets EDF. Il a un look époustouflant et les performances de sa configuration 6S lui donnent une vitesse fantastique et la capacité d'effectuer de grandes manœuvres de type jet, ce qui en fait également le jet sportif parfait pour les pilotes RC plus expérimentés. Le H-King Viper 64 est basé sur un petit avion à réaction biplace de construction artisanale conçu par la Viper Aircraft Corporation aux États-Unis à la fin des années 1990.

The Avios Extra NG (Next Generation) from Hobbyking is a premium semi-scale Aerobatic RC Plane modeled after the latest Extra series aircraft. The full size offers improved aerodynamics, an even higher degree of manoeuvrability, and precise handling. The Avios version of this incredible airplane inherits all these features to make it a great-looking, highly aerobatic, 3D-capable machine.

This high-performance aerobatic airplane features a potent 6S power system and includes a SK3 5055-500KV motor, Aerostar 80A RVS G2 ESC, and a 16x6 propeller. This setup gives you an incredible high power-to-weight ratio. High-torque, high-voltage, metal-geared 30g Turnigy 30/7-DHV digital servos are used throughout. These have excellent resolution and centering so that your exact transmitter inputs are conveyed directly to the control surfaces for precise control in all types of extreme manoeuvres. Also included are a pair of bolt-on "Side Force Generators" for increased side area, which makes for enhanced and stable knife-edge flying - a hallmark of the Extra NG design.

Do you feel the need for speed? Then this great-looking, extremely fast Rare Bear Reno Racer from Durafly is for you. It is supplied as a Plug-N-Fly model with minimal parts count, so assembly is quick and simple. There is no gluing required, just one screw holds the tail components in place, and 1 screw for the wing. Battery and radio access is via the large magnetically held canopy hatch, so radio installation and battery changes are very easy and straightforward.

The Legend Reimagined: Bush Plane DNA Meets 3D Performance.The legend of the Tundra has been reimagined for a new generation of pilots. We have taken the bush-flying DNA of the world-famous Tundra series and fused it with the aggressive, lightweight performance of a 3D profile foamy.

Meet the Durafly Tundra TPX—a standout in Hobbyking’s RC plane lineup, built to turn your local flying site or indoor venue into a high-octane 3D flight playground. Whether you're a STOL enthusiast or a hardcore 3D pilot, the Durafly Tundra TPX delivers a flight envelope that is as wide as it is exciting.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

Après le succès de l'EFX Racer, il a été décidé de produire une version mini, comme on dit, toutes les bonnes choses viennent dans de petits paquets, donc le MFX Racer est né. Le MFX a été conçu selon les mêmes normes que ses grands frères et offre toujours la vitesse, la force, l'agilité et la stabilité que vous êtes en droit d'attendre d'un modèle Durafly. De plus, vous bénéficiez de la simplicité d'assemblage et de la qualité que seul un modèle EPO de Durafly peut offrir.

The XFLY T-7A Red Hawk 750mm EDF jet is an easy-to-fly, versatile EDF trainer that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S compatible power system includes a 12-bladed 64mm fan unit that delivers ample power for an abundance of thrust, speed, and an incredible turbine-like sound. The full-size Boeing-Saab T-7 Red Hawk (originally known as the Boeing T-X) is an American/Swedish advanced jet trainer that was designed to replace the popular Northrop T-38 Talon. The design is smaller, but very similar to the McDonnell Douglas F/A-18 with its large leading edge root extensions, and V-shaped twin vertical tail design. These design features give the full-size incredible maneuverability and excellent low-speed handling, these attributes carry over extremely well to the XFLY model of the T-7A Red Hawk.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

Need spare parts for your H-King Voltigeur? Use these replacement wing panels to fix your plane.

Replacement cowling for the H-King Voltigeur

Kingcraft Pitts Special S-2B 1200mm Replacement L/R Lower Wing Set.

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

A replacement AVIOS Extra 330LX V2 left-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 right-wing with factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 horizontal stabilizer with hinged elevator and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.

A replacement AVIOS Extra 330LX V2 vertical stabilizer with hinged rudder and factory-applied decals.

Note: This replacement will also fit the AVIOS Extra 3300LX V1, but the color scheme will of course be different.