Avions

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Ce superbe et superbe modèle de sport/échelle Avios KingTwin 1700 volant est basé sur un petit bi-turbopropulseur et rappelle beaucoup le type utilisé par les compagnies aériennes charter militaires ou civiles du monde entier. La palette de couleurs simpliste mais frappante représente le type de travaux de peinture couramment utilisés sur les hélices civiles.

Le KingTwin 1700 regorge de fonctionnalités intéressantes, notamment des lumières LED, des rétracteurs et des volets divisés. Le groupe motopropulseur de 2 x Aerostar 3748-820KV brushless outrunners avec Aerostar 40A ESCs a été choisi par l'équipe Avios après des tests minutieux. Cette combinaison de moteurs, d'ESC, d'hélices contrarotatives et d'une batterie LiPo 4S s'est avérée être la configuration optimale pour la puissance et la durée.

Cette version du populaire Piper J-3 Cub est dans un nouveau schéma de couleur suisse frappant qui est un must pour tous les pilotes d'échelle. Ce schéma de couleurs utilise beaucoup moins de peinture, ce qui permet de gagner un peu de poids et de réduire encore la charge alaire déjà faible. L'attention portée aux détails en fait un modèle extrêmement réaliste, et il est livré avec une belle et généreuse envergure de 1400mm. Comme tous les Cub, avec sa grande envergure et ses caractéristiques de vol stables, il est très facile à piloter, parfait pour les pilotes ayant peu d'heures de vol comme pour les experts. Le Swiss Cub est également équipé d'un nouveau train d'atterrissage entièrement métallique, pratiquement indestructible, qui résistera aux atterrissages les plus difficiles. Un gain de poids supplémentaire a été obtenu par la suppression des fils métalliques de renfort de l'empennage, qui ont été remplacés par des cordes de choc blanches élastiques légères et faciles à installer.

Le H-King P-51 "Galloping Ghost" est le premier d'une nouvelle mini-série de H-King, les "Reno Aces", des combattants de la Seconde Guerre mondiale habillés pour impressionner lors des courses aériennes. Le P-51 "Galloping Ghost" avec le moteur sans balais 3108-1070KV inclus offre un modèle très rapide dès la sortie de la boîte avec des vitesses approchant les 100mph lors de l'utilisation du LiPo 2200 mah 4S recommandé. Cependant, si vous êtes une personne expérimentée et que vous recherchez des vitesses de plus de 100mph, il existe le moteur sans balais "Pro" 3108-1170KV "Pro" en option. Cela donnera à votre superbe Reno Ace une performance vraiment balistique sur le même accessoire, ESC et batterie 4S pour ceux qui peuvent gérer le couple de rotation supplémentaire au lancement.

Le H-King FG-1 Corsair "Lucky Gallon" est le troisième de la mini-série de H-King, les "Reno Aces", des combattants de la Seconde Guerre mondiale habillés pour impressionner lors des courses aériennes. Le FG-1 Corsair "Lucky Gallon" avec le moteur brushless 3108-1070KV inclus offre un modèle très rapide tout droit sorti de la boîte avec des vitesses approchant 100mph lors de l'utilisation du LiPo 4S 2200mAh recommandé. Cependant, si vous êtes une main expérimentée et que vous recherchez des vitesses de plus de 100mph, il existe le moteur sans balais 3108-1170KV 'Pro' en option. Cela donnera à votre superbe Reno Ace des performances vraiment balistiques sur le même accessoire, ESC et batterie 4S pour ceux qui peuvent gérer le couple de rotation supplémentaire au lancement.

Ce superbe et superbe modèle sportif/à l'échelle Avios KingTwin 1700 volant est basé sur un petit bi-turbopropulseur et rappelle beaucoup le type utilisé par les compagnies aériennes charter militaires ou civiles du monde entier. Avec autant de combinaisons de couleurs fantastiques disponibles pour ce type d'avion, Avios a décidé de produire une version blanche unie. Cette finition blanche unie fournit la toile vierge parfaite pour produire une palette de couleurs complètement unique et sur mesure de votre choix.

L'incroyable Frenzy est le parfait polyvalent. Avec des lancers de contrôle réduits, c'est un avion fluide, stable et remarquablement facile à piloter, parfait pour le novice ou le débutant. Augmentez ces lancers, et avec son rapport puissance/poids élevé sur une configuration 3S, le Frenzy porte bien son nom. Il est capable d'un large éventail de manœuvres acrobatiques étonnantes et répondra aux exigences des pilotes de voltige même les plus ambitieux.

Après le succès de l'EFX Racer, il a été décidé de produire une version mini, comme on dit, toutes les bonnes choses viennent dans de petits paquets, donc le MFX Racer est né. Le MFX a été conçu selon les mêmes normes que ses grands frères et offre toujours la vitesse, la force, l'agilité et la stabilité que vous êtes en droit d'attendre d'un modèle Durafly. De plus, vous bénéficiez de la simplicité d'assemblage et de la qualité que seul un modèle EPO de Durafly peut offrir.

This fantastic looking XFly 80mm EDF jet is a detailed scale model of the French Air Force Alpha Jet, it is packed full of scale details including molded-in panel lines, a simulated antenna, a crystal clear canopy with cockpit detail, removable gun pod, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, operational flaps, and full-flying horizontal stabs. Take your scale flying experience to another level with this impressive 6S-powered XFLY Alpha Jet in a French Air Force color scheme.

The XFLY Swift 2100 is a versatile electric-powered glider that is quite happy flying fast and doing aerobatics or is equally at home flying slowly and just floating around. To achieve this versatility the XFLY engineers have used CFD (Computer Fluid Dynamics), which has enabled the Swift 2100 to achieve a high lift-to-drag ratio and excellent aerodynamic characteristics. The factory-installed power system includes an efficient 3136-1000KV brushless motor with 40A brushless ESC and drives a 10x6 2-blade folding propeller with metal spinner. This system can be powered by either a 3S, or a 4S LiPo battery to deliver plenty of thrust for fast climbs to soaring altitudes, aerobatics, and general sport flying.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

The XFLY Eagle Twin is an innovative racing model with twin EDF motors on each wing tip, this is a radical configuration and allows for a large area in the middle of the fuselage for batteries, and other equipment. The included power system gives a power-to-weight ratio of over 1:15 which allows for easy hand-launching and an incredible performance. Top speeds of over 110mph are achievable and a special EDF mixing configuration makes the Eagle capable of performing differential maneuvers including flat spins, inverted flat spins, and other challenging aerobatic maneuvers.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

After the incredible success of the Tundra V1 and V2, Durafly has decided to produce yet another version with even more improvements to bring the Tundra series bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your flying even more fun than it was before (if that is at all possible!). Other changes and improvements include daylight bright LEDs (so bright they are suitable for true dawn-to-dusk flying), a reinforced nylon prop that is more efficient, and better balanced, a return to the classic EPO foam wheels which are lighter, and stronger, pre-installed pushrods, and hex-head bolts and screws throughout. The V3 is available in the classic Tundra green and white scheme, or a red and silver color scheme Durafly has called the "Inspire". The reason is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol experimental airplane.

Le H-King Viper 64 est abordable, très stable et possède des qualités de pilotage prévisibles, ce qui en fait le choix idéal pour votre première aventure dans le pilotage de jets EDF. Il a un look époustouflant et les performances de sa configuration 6S lui donnent une vitesse fantastique et la capacité d'effectuer de grandes manœuvres de type jet, ce qui en fait également le jet sportif parfait pour les pilotes RC plus expérimentés. Le H-King Viper 64 est basé sur un petit avion à réaction biplace de construction artisanale conçu par la Viper Aircraft Corporation aux États-Unis à la fin des années 1990.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

Après le succès de l'EFX Racer, il a été décidé de produire une version mini, comme on dit, toutes les bonnes choses viennent dans de petits paquets, donc le MFX Racer est né. Le MFX a été conçu selon les mêmes normes que ses grands frères et offre toujours la vitesse, la force, l'agilité et la stabilité que vous êtes en droit d'attendre d'un modèle Durafly. De plus, vous bénéficiez de la simplicité d'assemblage et de la qualité que seul un modèle EPO de Durafly peut offrir.

Avec un minimum de pièces et de temps d'assemblage, le MFX Racer se clipse et se visse simplement en moins de temps qu'il n'en faut pour charger une batterie. Le MFX Racer sur sa configuration 4S est rapide, mais il reste exceptionnellement stable et donne au pilote la sensation d'être bloqué. Cependant, contrairement à la plupart des machines de vitesse, il a aussi une très bonne maniabilité à basse vitesse. Avec ses 4 canaux de contrôle, le MFX Racer est également très acrobatique, avec de grands loopings, des rouleaux rapides, des bords de couteau, des snaps et des vrilles, le MFX Racer peut tout faire et plus encore, sa seule limite est vous, le pilote ! La MFX dispose de 2 options de bouts d'ailes (les deux sont fournis dans la boîte), une option standard de 815mm, ou une option d'aile clipsée de 715mm. L'aile standard donne un meilleur taux de montée, tandis que l'aile coupée augmente considérablement le taux de roulis.