Avions

Cette version H-King du classique F4U Corsair warbird est fabriquée dans une mousse EPO superbement finie dans une palette de couleurs marine authentique avec les décalcomanies pré-appliquées. Le Corsair est un flyer très stable à part entière, pour la plupart des pilotes, le gyro n'est pas nécessaire. Cependant, pour les pilotes débutants et à faible horaire, un système de stabilisation de vol ORX 6 axes est fourni, ce qui facilite encore davantage le vol. Le système de stabilisation utilise un MCU 32 bits et un gyroscope numérique à 6 axes pour une réponse de contrôle ultra-rapide, il peut être basculé du mode débutant au mode expert à mesure que votre expérience se développe.

H-King Avro Lancaster V3 "Dumbo" Replacement Fuselage w/Decals & Tailwheel.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

H-King Avro Lancaster V3 "Dumbo" Replacement Horizontal Stabilizer w/Elevators.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Vertical Stabilizers.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Nose Dome (Bomb Aimers Dome) and Gun Turret Set.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

Ces rétracteurs électriques sans servo en option ont été conçus pour le H-King Avro Lancaster et comprennent des roues à aspect échelle. Ils sont compatibles avec les versions 1, 2 et 3.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

A replacement pre-painted fuselage for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement upper and lower pre-painted main wing set with ailerons, horns, and cabane strut fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted horizontal stabilizer with elevator, carbon joining spar, and bracing wire fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted battery hatch with canopy for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale spinner with backplate for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted motor cowl with a detailed dummy engine for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement set of inter-plane, and cabane struts for the Durafly Gloster Gladiator Mk1 Biplane Fighter (6 pieces).

A replacement main landing gear set with fairings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pair of scale main landing wheels with hubs and fixing screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement tail wheel assembly with wheel for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement prop adapter for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement accessory pack that includes pushrods, pushrod keepers, and screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale detailing pack that includes dummy exhausts, machine guns, and air intake for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement decal set for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement rigging set that includes stranded flying wire and crimps for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A set of 4 replacement propeller blades for the H-King 800mm Hawker Tempest.

A replacement 3 blade propeller assembly with hub and screws for the H-King 750mm Chance Vought F4U Corsair.

A replacement spinner assembly with insert for the H-King 750mm Chance Vought F4U Corsair.

Le H-King P-51 "Galloping Ghost" est le premier d'une nouvelle mini-série de H-King, les "Reno Aces", des combattants de la Seconde Guerre mondiale habillés pour impressionner lors des courses aériennes. Le P-51 "Galloping Ghost" avec le moteur sans balais 3108-1070KV inclus offre un modèle très rapide dès la sortie de la boîte avec des vitesses approchant les 100mph lors de l'utilisation du LiPo 2200 mah 4S recommandé. Cependant, si vous êtes une personne expérimentée et que vous recherchez des vitesses de plus de 100mph, il existe le moteur sans balais "Pro" 3108-1170KV "Pro" en option. Cela donnera à votre superbe Reno Ace une performance vraiment balistique sur le même accessoire, ESC et batterie 4S pour ceux qui peuvent gérer le couple de rotation supplémentaire au lancement.

Un jeu d'ailes de remplacement pour le H-King Reno Aces P-51 "Galloping Ghost". Comprend les couvercles de servo d'ailerons, les tiges de poussée et les décalcomanies appliquées en usine

Un jeu de fuselage de remplacement pour le H-King Reno Aces P-51 "Galloping Ghost", comprend des décalcomanies appliquées en usine. Veuillez noter que le pont supérieur, la verrière et le capot ne sont pas fournis avec cet ensemble de fuselage.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

Un couvercle de trappe de remplacement avec un auvent doré pour le H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".