Avions

Présentation de notre PPE 3D MX2. Doté d'un design fantastique et la mise en page, tout cela sur EPP 3D'er satisfera les pilotes 3D les plus avides!

Il est fuselage est torsionnelle très rigide et léger avec beaucoup d'espace sous la longue trappe supérieure pour votre radio et système d'alimentation. L'aile est une affaire d'une seule pièce avec la construction du PPE, une aile symétrique très précis avec 2 espars supplémentaires afin de limiter la flexion et torsion. Les surfaces de contrôle sont autre chose - l'ascenseur, le gouvernail et les ailerons disposent d'une construction à 3 couches (Epp-Depron-PPE) permettant des surfaces rigides et NO flex à l'extrême jette! Enclenchez rouleaux Snap »et la réponse de commande est instantanée.

La lumière - mais rigide - cellule ajoute à un grand volant 3D 'mousseuse. Cascades, busards, des tours plats, des cercles de roulement ce modèle a la précision d'exécuter ceux-ci et d'autres mouvements que vous pouvez penser!

Assemblée de la cellule dans un processus rapide de 10-15 minutes à l'aide d'un petit support CA. Les dispositions de radio et de système d'alimentation sont très simples, la longue trappe supérieure d'un accès facile.

Ceci est un excellent modèle pour le vol du parc général et 3D hardcore. Vous aurez du mal à briser ce modèle, il prendra des coups durs et juste garder rebondir à chaque fois!


Caractéristiques:
• matériau EPP robuste, léger et résistant à l'écrasement
• PPE / Depron surfaces de contrôle composite Stiff
• Un design révolutionnaire ajoute à l'intégrité structurelle et la rigidité de la cellule
• Léger fournit la charge alaire optimale
• La performance exceptionnelle de voltige et de maniabilité 3D.
• Une conception simple permet un accès facile de l'équipement et l'installation
• La palette de couleurs se démarquer très bien pour l'orientation


Spécifications:
Envergure: 955 mm
Longueur: 945mm
Wing Zone: 15.2dm2
Poids: 550g (sans batterie)




A besoin:
système radio 4 canaux
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 hélice
4 x servos 9g

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

Le Bixler 1.1 est une plate-forme éprouvée pour les débutants jusqu'aux pilotes intermédiaires. Bien connu pour sa stabilité, le Bixler est également un excellent choix pour une plate-forme FPV peu coûteuse et parfait pour les dimanches après-midi paresseux. Le Bixler est fait de mousse EPO ultra-résistante.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.