Avions

Le Bixler 1.1 est une plate-forme éprouvée pour les débutants jusqu'aux pilotes intermédiaires. Bien connu pour sa stabilité, le Bixler est également un excellent choix pour une plate-forme FPV peu coûteuse et parfait pour les dimanches après-midi paresseux. Le Bixler est fait de mousse EPO ultra-résistante.

This great-looking EDF sports jet is the one you have all been waiting for, and it has one of the lowest all-up weights in its class, it is a good 500g lighter than comparable models that are available on the market today. It is a sport scale design and is based on the iconic BAE Hawk trainer as used by military air forces all over the world. This easy-to-assemble model has been termed as an almost ready-to-fly-plus, it is completely built out of the box, the wings, all-flying horizontal stabilizers, and vertical stabilizer just bolt-on, and pre-installed are a set of all-metal electronic retracts with doors, sequencer control box, and lightweight wheels, 11 high-torque, metal-geared digital servos, and a set of pre-installed, day-bright LED lights. The Sports Hawk comes pre-painted in a Formula One-inspired paint scheme and includes a set of HobbyKing brand decals that you can apply if you wish. The pre-painted Sport Hawk color scheme lends itself nicely to having other sponsorship decals being applied, or you could even repaint it in a custom color scheme, the choice is yours. A nice touch is the removable base to the cockpit area which makes it very easy to add a pilot and more cockpit detail if you wish.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

Le Wargo Signature Edge 540T 3D est un autre avion incroyable de la série inspirée par le célèbre pilote 3D Michael Wargo. L'Edge 540T a été spécialement conçu pour le vol 3D très précis et l'entraînement acrobatique. Michael Wargo, notre pilote d'équipe et expert 3D, voulait un avion en mousse plus rigide et plus léger que les autres mousses. Ceci a été réalisé grâce à la combinaison d'un cadre en balsa rigide et léger recouvert d'une mousse EPP légère et résistante aux chocs.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Aion laser cut balsa kit is an easy-build electric sports glider that includes ailerons and flaps. The Aion is aimed at the modeler who wants to experience real model-making but wants something that is reasonably straightforward to build. This is achieved with the use of accurate laser-cut parts and the simple box-type fuselage which produce a strong, accurate, lightweight structure. The Aion is relatively easy to build, however, we do recommend that some experience in building a wood model airplane has been gained previously. Most of the components are constructed over the detailed, high-quality printed 1:1 building plan. This outstanding kit is supplied with a powerful 2216-920KV brushless motor, a 30A brushless ESC, an 11" folding prop with metal spinner, 6 x 9g servos, and an iron-on covering film pack

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

Kit FlyCat EDF
Ce petit kit prend environ 4 heures pour construire et satisfera les jocky des gaz en chacun de nous!
Le flycat est livré avec 56mm EDF et vous aurez besoin d' un ESC 25A & 4800kv Inrunner.
Ce plan est extrêmement rapide, (plus de 100 mph!), Mais encore stable au vol lent.

Spec.
Envergure: 640mm
Longueur: 800mm
Poids: 290g
BESC: 25A (non inclus)
Moteur: 4800kv 20-30 taille Inrunner (non inclus)
Lipoly: 1300mAh 11.1V 20C (non inclus)
 

Notre rapport de vol.
Kit correspond bien ensemble, léger ponçage des bords avant et arrière requis pour enlever la mousse supplémentaire. Nous avons choisi de ne pas renforcer l'aile avec un tube CF, qui na pas se révéler être un problème, même à pleine vitesse G tourne.
Nous avons choisi de monter le BESC étant la zone de la batterie, au cas où la batterie nécessaire pour être déplacé vers l' avant pour ajuster CofG, mais ce ne était pas nécessaire.
EDF a été monté sur le bâton de montage. Montage de bâton a été raccourcie, avec le morceau supplémentaire utilisé pour soulever le FED hors du bâton pour effacer le FED linceul. 2 boulons lieu l'unité de ventilateur à la baguette, un avant et un après les pales du ventilateur.
Premier vol.
Nous avons gardé CofG 9.5cm du sommet des vents bord d' attaque. Le flycat a été lancé à la main à 3/4 gaz, accellerating rapidement. A notre grande surprise ne parage était nécessaire.
Le flycat est un kit extrêmement rapide à voler, et a exigé beaucoup d'ascenseur dans les virages. Nous vous suggérons de mettre l'ascenseur maximale jette. Il a besoin d' énormes quantités d'ascenseur dans les virages!
Dans l' ensemble un excellent plan qui flys en douceur, même les jours de vent.
Nous suggérons un bon pack lipo, comme ce petit hotty va mâcher à travers un 1500mAh en seulement 5 minutes. Nous avons utilisé le pack 3S1P ZIPPY-R 1800mAh 22C pour environ 8 vols minute. Par rapport à la meute ZIPPY-Q qui nous a court à environ 7 minutes.

Présentation de notre PPE 3D MX2. Doté d'un design fantastique et la mise en page, tout cela sur EPP 3D'er satisfera les pilotes 3D les plus avides!

Il est fuselage est torsionnelle très rigide et léger avec beaucoup d'espace sous la longue trappe supérieure pour votre radio et système d'alimentation. L'aile est une affaire d'une seule pièce avec la construction du PPE, une aile symétrique très précis avec 2 espars supplémentaires afin de limiter la flexion et torsion. Les surfaces de contrôle sont autre chose - l'ascenseur, le gouvernail et les ailerons disposent d'une construction à 3 couches (Epp-Depron-PPE) permettant des surfaces rigides et NO flex à l'extrême jette! Enclenchez rouleaux Snap »et la réponse de commande est instantanée.

La lumière - mais rigide - cellule ajoute à un grand volant 3D 'mousseuse. Cascades, busards, des tours plats, des cercles de roulement ce modèle a la précision d'exécuter ceux-ci et d'autres mouvements que vous pouvez penser!

Assemblée de la cellule dans un processus rapide de 10-15 minutes à l'aide d'un petit support CA. Les dispositions de radio et de système d'alimentation sont très simples, la longue trappe supérieure d'un accès facile.

Ceci est un excellent modèle pour le vol du parc général et 3D hardcore. Vous aurez du mal à briser ce modèle, il prendra des coups durs et juste garder rebondir à chaque fois!


Caractéristiques:
• matériau EPP robuste, léger et résistant à l'écrasement
• PPE / Depron surfaces de contrôle composite Stiff
• Un design révolutionnaire ajoute à l'intégrité structurelle et la rigidité de la cellule
• Léger fournit la charge alaire optimale
• La performance exceptionnelle de voltige et de maniabilité 3D.
• Une conception simple permet un accès facile de l'équipement et l'installation
• La palette de couleurs se démarquer très bien pour l'orientation


Spécifications:
Envergure: 955 mm
Longueur: 945mm
Wing Zone: 15.2dm2
Poids: 550g (sans batterie)




A besoin:
système radio 4 canaux
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 hélice
4 x servos 9g

Le H-King Crusader 30E est basé sur la conception classique du bâton. Cet avion RC électrique peut être piloté par des débutants et des experts. Il est construit à partir de plis légers et de balsa qui sont peints avec une palette de couleurs à contraste élevé. Le Crusader se démarquera au sol et dans les airs dans votre club de loisirs local.