Modèles volants

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

We have all had to start learning to fly an RC model at some point, and a stable, high-wing trainer that is very forgiving is what is required. The Dancing Wings Hobby Vogee-16 Trainer is the perfect choice for the rookie pilot. It has a large, flat-bottomed wing with dihedral which enables it to fly very slowly, and it has the stability to sort itself out if you get in a muddle. The Vogee's flying characteristics are very benign, beginners tend to over-control, and the Vogee is very gentle in its handling, especially if you install one of the readily available 3-axis gyros that are available on the market these days. It also has a tricycle landing gear with a steerable nosewheel which really helps with the take-offs and landings. This version of the Vogee is supplied with a powerful 2817-900KV brushless motor, a 60A brushless ESC, an 11" prop, 2 x 37g servos, and 2 x 17g 

The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style. 

The Dancing Wings Hobby Cute Girl laser cut balsa kit captures the type of vintage model airplane that was used in the early days of RC with radio assist. It has that classic retro look, lots of wing dihedral, band on wings, a large cabin, classic shapes to the wings and empennage, and tail dragger landing gear, all the features required for a retro classic look.

The controls are just basic 3 channels, rudder, elevator, and motor control, this keeps things nice and simple. We recommend that you power the Cute Girl with a brushless motor set-up. However, a nitro or a diesel engine can be used for that even more authentic vintage look and classic soundtrack.

The Dancing Wings Hobby Savage Bobber is a small, lightweight foam model that is quick and simple to build. The full-size Savage Bobber was devised by the Zlin Aviation Company. The Bobber as in the motorcycle world means that it is a stripped-down, customized version of an original. The Savage Bobber is a stripped-down, customized version of its older brother the Savage Classic. It is lighter, more maneuverable, and has a slightly narrower fuselage, and the absence of covering to the rear of the fuselage greatly improves the crosswind handling.

The model is reasonably straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction, tough plastic for the open framework rear fuselage, and lightweight balsa for the internal structure. Carbon strips are also included to reinforce and improve the stiffness of the structure. It builds up quickly into a good-looking, fun-to-fly lightweight (only 98g) sports plane that is perfect for indoor or park flying. This ARF kit is supplied with a powerful 1108-4000KV brushless motor, 5A brushless ESC, 5" propeller, and 4 x 2g servos.

The Dancing Wings Hobby Shining is a large lightweight profile-style foam kit that is quick and simple to build. It has been designed to be the perfect introduction to 3D flying and will perform extreme 3D maneuvers such as waterfalls, harriers, knife-edge loops, rolling circles, and much more.

The model is very straightforward to assemble, it is manufactured in pre-painted high-quality EPP foam sheet for the majority of the construction so the parts count is quite low, and carbon strips are supplied for strengthening. It builds up quickly into a good-looking, fun-to-fly lightweight extreme sport 3D plane that is perfect for park flying and on playing fields. This ARF model is supplied with a powerful 2216-950KV brushless motor, 30A brushless ESC, 10" propeller, and 4 x 9g servos.

Durafly Auto-G Gyrocopter 821mm - Remplacement de la batterie Hatch

Pioneer 1020mm - Remplacement stabilisateur horizontal

La Belle Dame 1180mm - Hélice Nuts

Dolphin Jet EPO 1010mm - Remplacement Vertical & Horizontal Tail

Phantom FPV aile volante 1550mm - Couverture de remplacement du moteur

Présentation de notre PPE 3D MX2. Doté d'un design fantastique et la mise en page, tout cela sur EPP 3D'er satisfera les pilotes 3D les plus avides!

Il est fuselage est torsionnelle très rigide et léger avec beaucoup d'espace sous la longue trappe supérieure pour votre radio et système d'alimentation. L'aile est une affaire d'une seule pièce avec la construction du PPE, une aile symétrique très précis avec 2 espars supplémentaires afin de limiter la flexion et torsion. Les surfaces de contrôle sont autre chose - l'ascenseur, le gouvernail et les ailerons disposent d'une construction à 3 couches (Epp-Depron-PPE) permettant des surfaces rigides et NO flex à l'extrême jette! Enclenchez rouleaux Snap »et la réponse de commande est instantanée.

La lumière - mais rigide - cellule ajoute à un grand volant 3D 'mousseuse. Cascades, busards, des tours plats, des cercles de roulement ce modèle a la précision d'exécuter ceux-ci et d'autres mouvements que vous pouvez penser!

Assemblée de la cellule dans un processus rapide de 10-15 minutes à l'aide d'un petit support CA. Les dispositions de radio et de système d'alimentation sont très simples, la longue trappe supérieure d'un accès facile.

Ceci est un excellent modèle pour le vol du parc général et 3D hardcore. Vous aurez du mal à briser ce modèle, il prendra des coups durs et juste garder rebondir à chaque fois!


Caractéristiques:
• matériau EPP robuste, léger et résistant à l'écrasement
• PPE / Depron surfaces de contrôle composite Stiff
• Un design révolutionnaire ajoute à l'intégrité structurelle et la rigidité de la cellule
• Léger fournit la charge alaire optimale
• La performance exceptionnelle de voltige et de maniabilité 3D.
• Une conception simple permet un accès facile de l'équipement et l'installation
• La palette de couleurs se démarquer très bien pour l'orientation


Spécifications:
Envergure: 955 mm
Longueur: 945mm
Wing Zone: 15.2dm2
Poids: 550g (sans batterie)




A besoin:
système radio 4 canaux
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 hélice
4 x servos 9g

HobbyKing Bixler 2 EPO 1500mm - Remplacement Pushrod Set

HobbyKing Bixler 2 EPO 1500mm - Remplacement Flap Charnières (6pcs / sac)

Fonctionne pour les deux modèles Bixler 2 et Bix3.

HobbyKing Bixler 2 EPO 1500mm - Remplacement Aileron Hinges (10pcs / bag)

Super Kinetic - Remplacement Motor Mount

Super Kinetic - Remplacement Canopy

Super Kinetic - Remplacement de contrôle Wire - acier (avec ballon Link)

Super Kinetic - Stickers de remplacement (2pcs / set)

Durafly ™ SkyMule 1500mm - Bottom Servo Hatch

HobbyKing® Bix3 Entraîneur 1550mm - Remplacement de roue Pant Set

HobbyKing® Bix3 Entraîneur 1550mm - Remplacement Landing Gear

HobbyKing® Bix3 Entraîneur 1550mm - Remplacement Tail Wheel

HobbyKing® Bix3 formateur 1550mm - Contrôle de remplacement Ensemble de tringle

HobbyKing® Bix3 formateur 1550mm - Remplacement Prop Adapter

HobbyKing ™ Wingnetic 805mm - Remplacement Fuselage

HobbyKing ™ Bix3 formateur 1550mm - Remplacement Wing Spar

HobbyKing ™ Bix3 formateur 1550mm - Boulons d'aile de remplacement

2 Pieces Inclus

HobbyKing ™ Super-G Autogyro - Boulons Lame Grip

Comprend 3 pièces

HobbyKing Salle Cherokee Planeur 1700mm - Fuselage Set

EPO Fuselage avec des décalques, plastique. barres de commande

Durafly ™ EFX Racer - Fuselage remplacement (jaune)

Durafly ™ EFX Racer - Remplacement de la batterie Hatch (Rouge)

Durafly ™ EFX Racer - Remplacement de la batterie Hatch (Jaune)

Durafly ™ EFX Racer - Remplacement stabilisateur horizontal