Modèles volants

Un jeu de fuselage de remplacement pour le H-King Reno Aces P-51 "Galloping Ghost", comprend des décalcomanies appliquées en usine. Veuillez noter que le pont supérieur, la verrière et le capot ne sont pas fournis avec cet ensemble de fuselage.

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

Un couvercle de trappe de remplacement avec un auvent doré pour le H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".

Un moteur brushless 3108-1070KV de remplacement pour le H-King Reno Aces P-51 "Galloping Ghost". Il s'agit du moteur standard fourni avec le modèle PNF.

A replacement 8x6 propeller for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement set of nacelle protection skid plates for the series of H-King Avro Lancasters, these will fit versions 1, 2, and 3.

Cette version du Yak-11 est basée sur une taille réelle qui vole actuellement en Allemagne, la palette de couleurs honore les unités françaises qui ont volé pour les Russes pendant la Seconde Guerre mondiale. Comme mentionné ci-dessus, étant la version warbird, il est fourni avec un groupe motopropulseur qui a été développé pour plus de couple. En utilisant un pack LiPo 6S, le moteur sans balai 5052-410KV avec l'ESC 95A fourni et l'hélice 17x10 donneront toujours au Yak-11 une vitesse impressionnante allant jusqu'à 100mph, mais les performances verticales doivent être vues pour être crues. Les manœuvres de warbird à grande échelle sont un rêve à piloter avec la quantité de couple et de puissance disponible, et les manœuvres de roulement sont très axiales. Impressionnez les spectateurs avec des défilés aériens lents en forme d'échelle avec les volets et les roues baissées, ou des courses rapides et à faible mitraillage et en tirant dans un demi-huit cubain ou une manœuvre similaire. Le Yak-11 dans cette palette de couleurs commémoratives est fantastique sous tous les angles lorsqu'il vole ou lorsqu'il est assis au sol.

Vous voulez encore plus de vitesse et de puissance pour votre H-King Reno Aces P-51 "Galloping Ghost" ? Ensuite, passez à ce sans balais Pro 3108-1160KV haute puissance en option et transformez-le en un missile balistique avec des performances verticales illimitées. Il n'est pas nécessaire de changer l'hélice fournie ou l'ESC, les deux sont parfaits avec cette mise à niveau.

Cette version H-King de ce très impressionnant F-16 Fighting Falcon est fabriquée en mousse EPO et est magnifiquement finie dans une palette de couleurs authentique de l'USAF avec les décalcomanies pré-appliquées en usine. Le H-King F-16 a des caractéristiques de vol exceptionnelles en soi, il vole comme s'il était sur des rails, mais le gyroscope ORX 6 axes préinstallé porte cela à un autre niveau. Les pilotes de tous niveaux d'expérience bénéficieront de l'utilisation du réglage intermédiaire du gyroscope, cela améliore vraiment la stabilité et adoucit le vol, en particulier dans des conditions venteuses. Pour les débutants et les pilotes à faible horaire, le système de stabilisation de vol rend le vol encore plus facile. Il utilise un MCU 32 bits pour une réponse de contrôle ultra-rapide et dispose de 3 réglages, gyroscope désactivé, gyroscope activé et mode d'entraînement. En mode entraînement, le gyroscope offre une stabilité totale et limite également la quantité de roulis et de tangage pouvant être utilisée. En mode gyroscope, cela donne une stabilité légèrement moins assistée et ne limite pas le roulis ou le tangage qui peut être utilisé, parfait pour les acrobaties aériennes fluides de style jet. En mode gyro off, c'est exactement ça, pas de gyro du tout.

A replacement pre-painted fuselage for the Durafly Me-163B V2 "White 10" with tailwheel and factory-applied decals.

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted canopy/battery hatch for the Durafly Me-163B V2 "White 10" with pilot, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pair of pre-painted wing panels for the Durafly Me-163B V2 "White 10" with elevons, and factory-applied decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted vertical stabilizer for the Durafly Me-163B V2 "White 10" with rudder, and decals.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted cowl for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement pre-painted take-off dolly with wheels for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement spinner for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163, the color scheme will of course be different.

A replacement set of decals for the Durafly Me-163B V2 "White 10".

Please note:  This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement aerial, and pitot head tube for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement accessory set for the Durafly Me-163B V2 "White 10". Includes, hex-wrench, pushrods, snap links, control horns, and control horn mounting screws.

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

This beautiful model of a North American T-28 Trojan USAF Military Trainer with brushed 1020 motor, and 3D/6G gyro stabilization system not only looks great, but it flies great as well. The built-in switchable 6-axis gyro flight stabilization system makes it perfect for both beginners and experts alike. It is tough too, it's constructed from durable, crash-resistant EPP foam which is light, extremely strong, and ready to take all the knocks and bangs associated with learning to fly.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

The XFLY Sukhoi Su-27 Flanker 750mm EDF jet is an easy-to-fly, great-looking, and versatile scale EDF model that will appeal to a wide variety of pilots, including those with limited experience in flying EDF jets. The 4S-compatible power system includes twin 12-bladed 50mm fan units that deliver an abundance of power for excellent thrust, loads of speed, and an incredible turbine-like sound. The full-size Sukhoi Su-27 Flanker is a long-range air defense jet fighter that was designed as a direct competitor to the McDonnell Douglas F-14. The swept-back wing configuration gives the Su-27 excellent slow-speed handling and short-field capabilities, but it also allows for high maneuverability at speed. These design attributes carry over extremely well to the XFLY model of the Sukhoi Su-27.

This fantastic-looking XFly 80mm EDF jet is a detailed scale model of a US Airforce T-7A Red Hawk advanced trainer. It is packed full of scale details including molded-in panel lines, simulated antenna, pitot tube, a crystal clear canopy with cockpit detail, missiles, drop tanks, and much more. Scale features include servoless retracts with CNC machined scale, sprung oleos and sequenced gear doors, functional LED nav and landing lights, full-flying horizontal stabs, and operational flaps.

The Dancing Wings Hobby Fokker Eindecker III is a scale model of the famous World War 1 monoplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, a dummy engine, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

The Dancing Wings Hobby S.E.5A is a detailed scale model of the famous World War 1 biplane fighter. The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, authentic structure. A lot of scale detail is supplied including, scale exhausts, scale wheels, and a dummy machine gun, plus a full accessory kit is also supplied which includes all the necessary hardware including scale rigging to complete the kit.

A replacement canopy/battery hatch for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement pair of wings for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement set of tailbooms for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement horizontal stabilizer with elevator for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

A replacement fuselage with nosewheel fairing for the Durafly D.H.100 Vampire V3 RAF Camo edition.

Please note: This replacement part will also fit earlier versions of the Durafly D.H.100 Vampire.

The Volantex RC 4-channel P-51D Mustang is the perfect ready-to-fly small warbird that comes complete with a transmitter, receiver, integrated ESC, and built-in Xpilot stabilization system. This gyro system offers super stable flying and self-leveling which makes it perfect for early, and relatively inexperienced pilots. The gyro is switchable from the transmitter, 3 modes can be selected. The first is beginners mode which gives maximum stabilization and reduces the amount of control the pilot has, the second is intermediate, which reduces the stabilization and gives the pilot slightly more control. The final mode is no gyro stabilization and the pilot has full control authority. It also features a "One-Key" aerobatic system which makes performing aerobatics like loops and rolls a breeze, and a "One-Key" return system.