Modèles volants

Présentation de notre PPE 3D MX2. Doté d'un design fantastique et la mise en page, tout cela sur EPP 3D'er satisfera les pilotes 3D les plus avides!

Il est fuselage est torsionnelle très rigide et léger avec beaucoup d'espace sous la longue trappe supérieure pour votre radio et système d'alimentation. L'aile est une affaire d'une seule pièce avec la construction du PPE, une aile symétrique très précis avec 2 espars supplémentaires afin de limiter la flexion et torsion. Les surfaces de contrôle sont autre chose - l'ascenseur, le gouvernail et les ailerons disposent d'une construction à 3 couches (Epp-Depron-PPE) permettant des surfaces rigides et NO flex à l'extrême jette! Enclenchez rouleaux Snap »et la réponse de commande est instantanée.

La lumière - mais rigide - cellule ajoute à un grand volant 3D 'mousseuse. Cascades, busards, des tours plats, des cercles de roulement ce modèle a la précision d'exécuter ceux-ci et d'autres mouvements que vous pouvez penser!

Assemblée de la cellule dans un processus rapide de 10-15 minutes à l'aide d'un petit support CA. Les dispositions de radio et de système d'alimentation sont très simples, la longue trappe supérieure d'un accès facile.

Ceci est un excellent modèle pour le vol du parc général et 3D hardcore. Vous aurez du mal à briser ce modèle, il prendra des coups durs et juste garder rebondir à chaque fois!


Caractéristiques:
• matériau EPP robuste, léger et résistant à l'écrasement
• PPE / Depron surfaces de contrôle composite Stiff
• Un design révolutionnaire ajoute à l'intégrité structurelle et la rigidité de la cellule
• Léger fournit la charge alaire optimale
• La performance exceptionnelle de voltige et de maniabilité 3D.
• Une conception simple permet un accès facile de l'équipement et l'installation
• La palette de couleurs se démarquer très bien pour l'orientation


Spécifications:
Envergure: 955 mm
Longueur: 945mm
Wing Zone: 15.2dm2
Poids: 550g (sans batterie)




A besoin:
système radio 4 canaux
2217 950-1100KV Brushless outrunner
30Amp ESC
3S 11.1V 1100-1300MAH Li-Po
10x4.7 / 11x4.7 hélice
4 x servos 9g

Le Durafly SlowPoke est un modèle en mousse EPO au design classique. En plus de la conception de vol facile du SlowPoke, Durafly a ajouté des roues plus grandes pour faciliter encore plus le décollage et l'atterrissage sur une grande variété de terrains. Un excellent avion pour votre premier taildragger à aile basse ou pour le pilote expérimenté exigeant qui veut un avion beau et facile à voler.

Ce superbe petit bolide peut retracer sa lignée jusqu'au très populaire Rare Bear que nous avons vendu il y a quelques années. C'était un parkflyer très rapide basé sur les Reno Racers qui était incroyablement amusant à piloter, était très résistant et il est devenu un favori très rapidement.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

The ZOHD Altus FPV airplane offers cutting-edge technology for those enthusiasts seeking unmatched performance and versatility. The Altus combines state-of-the-art technology with a practical design and offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail are detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Drift is a super easy, hand-launch slow-fly pusher glider that has been designed specifically for FPV flying. It is extremely stable in flight, but the controls remain very responsive and accurate. Being a pusher prop design gets the prop well away from the ground, and the hands when launching, it also allows the camera an uncluttered viewing angle.

The Drift is very easy to assemble, no glue is required, and the wing and tail boom remain detachable, making for easy transportation. The Drift has a large battery bay for extended flight times, plus a nose camera bay compatible with most FPV, and AIO cameras available today. It also has a dedicated equipment bay for the flight controller, and  GPS unit, etc. The strong EPP foam airframe also benefits from a tough, specially designed H-girder spar for the wing, built-in CF inside the fuselage for enhanced strength, and CF pushrods throughout for precision control.

The ZOHD Talon GT Rebel FPV airplane offers a revolutionary design for those enthusiasts seeking unmatched performance and versatility. The Talon GT Rebel combines state-of-the-art technology with the best of old-school practices which offers an unparalleled flying experience. This portable design is very easy to assemble, no glue is required, and the wings and tail remain detachable making it very easy to transport, even in a backpack for when trekking to those out-of-the-way places.

The ZOHD Dart XL FPV flying wing airplane offers incredible lifting power, excellent handling, and portability, making it the ideal choice for long-range FPV flying. This "Enhanced Version" features a newly designed motor mount, a GPS bay with cover, built-in carbon fiber for strength, a new optimized airfoil, and a strengthened battery bay. The Dart XL incorporates Vortex generators and reversed wingtips for improved handling, lift efficiency, and yaw stability. It also has a computer-designed airflow pod that maximizes the cooling to all the onboard equipment to minimize overheating electronics and reduce the risk of failure. The vertical fins are detachable, making it much easier to transport to those out-of-the-way places for the best FPV experiences.

The Durafly Carbon Arcus is a sleek and beautiful F3A biplane designed to perform smooth, F3A-style pattern aerobatics and is the perfect choice for honing your aerobatic skills. It features a durable, lightweight EPO airframe with carbon reinforcement, aluminum landing gear, carbon interplane struts, and an advanced 4S motor and prop combination that offers a high power-to-weight ratio for unending verticals and incredible performance.

Flying the Arcus F3A is a dream, the long tail moment, the low wing loading, and the abundance of power give you a stable and predictable airplane. Take-offs require very little rudder input, rolls are crisp and axial, and loops can be as large as you wish. The large propeller provides ample braking action in the downlines to avoid overspeeding, and if you enjoy flying knife-edge, then the Arcus II performs this with ease. No roll or pitch coupling here, just apply a touch of rudder, control the throttle to hold your line, and the Arcus will knife edge until the cows come home. Finally, when the time comes, throttle back, and the Carbon Arcus settles into a nice sink rate for a perfect 3-point landing every time.

The Durafly™ Ugly Stick V2 not only looks as good as the original but flies just as well too, perfectly capturing those excellent flight qualities of which the Ugly Stick was renown. Being the well mannered RC sports model it is, the Ugly Stick is suitable for both novice and experienced flyers alike. At the lower end of the speed range, it exhibits no bad stall tendencies and can be flown comfortably at half throttle if desired. However, when you wish to experience its true flying capabilities, open the throttle wide and the Ugly Stick will oblige, performing a full range of sport aerobatic maneuvers with the ease that made the original so popular. Due to the low current draw of the Ugly Stick V2 power system, you can also enjoy longer than average flying times with mixed power use.

The XFLY Partenavia P68 is a small, semi-scale twin-engined model that is perfect for flying in small areas such as local parks, sports fields, etc. It has been designed to be extremely easy to fly and assemble, which makes it perfect as an entry-level choice for the novice pilot. The design is based on the full-size Partenavia P68 which is a 6-seater, twin-engined high-wing monoplane that is generally used for light transport and training.

Lorsque Durafly a sorti l'Auto-G original, il a mis la barre haute en étant le premier autogire Plug-N-Fly sur le marché, cette barre a été placée encore plus haut avec l'Auto-G2 V2. Fidèle à la tradition Durafly, l'Auto-G2 est simple et rapide à assembler, il vole extrêmement bien et a un look incroyable en vol. Les améliorations de la V2 comprennent l'ajout d'une plaque de tête durable en nylon renforcé de fibres de 2mm, des biellettes renforcées de fibres, un mât principal entièrement encastré, un train d'atterrissage plus large et plus solide avec de grandes roues légères en mousse de type bush, et un moteur à capot, ainsi qu'une électronique interne plus petite offrant plus d'espace pour la batterie de vol.