送受信機/サーボ

Torque Rate: 10KG
Speed: .16sec/60deg
Input: 5~7v
Type: Digital
Gearing: Metal
Spline Count: 25
Weight: 55g
Size: 40.7 x 19.7 x 42.9mm

Turnigy TGY-811 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

Turnigy TGY-813 is designed for Gliders and Composite EDFs -  low profile performance, better precision movement and low electric impedance. This low profile servo is also a great choice for retract gear as well as thin wing control surfaces.

The BMS-622DMG digital servo is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. Being digital, the quoted torque is not only when the servo is moving, but also the holding power when the servo arm is stationary and under load. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a silver anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-622DMG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-662MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.2kg and an excellent speed of 0.17 sec when using a 6V power source. The gear train has metal gears, a dual ball-raced output shaft, and also a red anodized metal heatsink to keep the components cool when operating under extreme conditions, this prolongs the life of the servo. The BMS-662MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-632MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 14.6kg and an excellent speed of 0.15 sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-632MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-622MG is perfect for planes, helicopters, boats, vehicles (GP & EP), and robotics. The servo has an impressive output torque of 10.6kg and an excellent speed of 0.13sec when using a 6V power source. The gear train has metal gears and a dual ball-raced output shaft. The BMS-622MG is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The BMS-380MAX is perfect for sailplanes, electric-powered gliders, small electric cars, and also as a wing servo as it is only 13mm wide. The servo has an impressive output torque of 4.7kg and an excellent speed of 0.14sec when using a 6V power source. The gear train has helical metal gears, and the ball-raced output shaft has a 25-tooth spline identical to Futaba specs. The BMS-380MAX is supplied with the universal "S" type connector, same as JR, etc, and a complete servo accessory pack with arms and mounting hardware.

The GS2010MG is a fast (0.10sec), high torque (23.5kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3009MG is a fast (0.09sec), high torque (38kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a fast (0.05sec), high torque (39kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a quick (0.11sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GC3507MG is a very fast (0.07sec), high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a very fast (0.09sec), high torque (45kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a very fast (0.06sec), brushless, high torque (35kg), metal-geared standard-size servo with an amazing rotation of 270°. This makes it very suitable for a variety of applications including robotics, or as a sail winch for a model yacht. The servo is supplied with a mounting kit and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No:  GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 270°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GD2508MG is a fast (0.08sec), high torque (25kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.  The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD2508MG
Torque@6V: 18kg
Torque@8.4V: 25kg
Speed@5V: 0.13sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3511MG is a fast (0.11sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3511MG
Torque@6V: 28kg
Torque@8.4V: 35kg
Speed@6V: 0.20sec/60°
Speed@8.4V: 0.11sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GD3507MG is a fast (0.07sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GD3507MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.07sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GC4509MG is a fast (0.09sec), very high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GC4509MG
Torque@6V: 35kg
Torque@8.4V: 45kg
Speed@6V: 0.13sec/60°
Speed@8.4V: 0.09sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

The GB3506MG is a fast (0.06sec), high torque (35kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GB3506MG
Torque@6V: 30kg
Torque@8.4V: 35kg
Speed@6V: 0.09sec/60°
Speed@8.4V: 0.06sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 75g

The GB4508MG is a fast (0.08sec), very high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn. The entire servo case is CNC machined from solid 6061 aluminum, which is extremely strong and acts as a very good heatsink for the motor and amplifier.

Specs:
Model No: GB4508MG
Torque@6V: 34kg
Torque@8.4V: 45kg
Speed@6V: 0.12sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Brushless 
Amplifier: Digital
Dimensions: 40x20x40mm
Weight: 78g

A powerful high torque (23.5kg), metal-geared standard size servo with CNC machined center case and a rotation of 180°,  supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2010MG
Torque@5V: 21kg
Torque@6.8V: 23.5kg
Speed@5V: 0.12sec/60°
Speed@6.8V: 0.10sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The G3009MG is a very powerful high torque (38kg), metal-geared standard size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: G3009MG
Torque@5V: 28.5kg
Torque@6.8V: 38kg
Speed@5V: 0.11sec/60°
Speed@6.8V: 0.09sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Iron core
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS2505MG is a very very fast (0.05sec), powerful high torque (39kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS2505MG
Torque@5V: 26kg
Torque@8.4V: 39kg
Speed@5V: 0.10sec/60°
Speed@8.4V: 0.05sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

The GS3508MG is a fast (0.08sec), extremely powerful high torque (45kg), metal-geared standard-size servo with a rotation of 180°, supplied with a mounting kit, and a selection of plastic servo horns, plus one metal servo horn.

Specs:
Model No: GS3508MG
Torque@5V: 31kg
Torque@8.4V: 45kg
Speed@5V: 0.14sec/60°
Speed@8.4V: 0.08sec/60°
Rotation: 180°
Gear Train: Metal
Bearings: Twin BB
Motor: Coreless
Amplifier: Digital
Dimensions: 40x20x40.5mm
Weight: 60g

Power HD servos are reknown for build quality and reliability, the TR-4 micro digital waterproof servo is no exception. This servo is perfect for smaller models such as crawlers, buggies, boats and even water/float planes where waterproofing is necessary. The case is sealed with rubber gaskets and O rings and the gear train is metal except for one sacrificial plastic gear. This helps stop permanent damage being done to the servo in the case of a really hard knock. The servo is supplied with 2 x single arm output horns and an M3 servo horn screw.

コロナDS538HVデジタルメタルギアサーボ8キロ/ 0.12sec / 58グラム

モデル：DS538HV
動作電圧：6.0V / 7.4V
動作電流：300ミリアンペア/ 400ミリアンペア
動作速度：0.13sec.60º/0.12sec.60º
ストールトルク：7kg.cm / 8kg.cm
サイズ：20X40X38.5mm
重量：58グラム
デッドバンド：≤3uSec
オペレーティング旅行：40°/片側パルス走行400us
ポテンショメータ：5スライダー/間接駆動
ボールベアリング：MR106
ギア： メタル
コネクタワイヤ：300ミリメートル
動作温度範囲：-20℃+ 60℃

コロナDS558HVデジタルメタルギアサーボ14キロ/ 58グラム/ 0.18秒

モデル：DS558MG
動作電圧：6.0V / 7.4V
動作電流：300ミリアンペア/ 400ミリアンペア
動作速度：0.20sec.60º/0.18sec.60º
ストールトルク：12kg.cm / 14kg.cm
サイズ：20X40X38.5mm
重量：58グラム
デッドバンド：≤3uSec
オペレーティング旅行：40°/片側パルス走行400us
ポテンショメータ：5スライダー/ダイレクトドライブ
ボールベアリング：MR106
ギア： メタル
コネクタワイヤ：300ミリメートル
動作温度範囲：-20℃+ 60℃