パワーシステム

Volantex Ranger 1600 and Phoenix 1600 Replacement 2212-1400KV Brushless Motor.

A pair of replacement Aerostar 40A ESCs with wiring and connectors for the AVIOS KingTwin 1700.

A replacement Aerostar 3748-820KV brushless motor with mount and connectors for the AVIOS KingTwin 1700.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement 3720-900KV brushless motor with prop shaft for the H-King MX2 Extreme 30E.

ホビーキングスイスJ-3パイパーカブ用のプロペラアダプター付きの交換用3648-700KVブラシレスモーター。

注意：これらのパーツは、ホビーキング1400mm J-3カブの以前のバージョンに適合します。もちろん、色は、該当する場合は異なります。

A replacement 3108-1070KV brushless motor for the H-King Reno Aces P-51 "Galloping Ghost", this is the standard motor that is supplied with the PNF model.

ホビーキングリノエーシズP-51「ギャロッピングゴースト」のスピードとパワーをさらに高めたいですか？ 次に、このオプションのハイパワーPro 3108-1160KVブラシレスにアップグレードして、無制限の垂直性能を備えた弾道ミサイルに変えます。 付属のプロペラやESCを変更する必要はありません。どちらもこのアップグレードで問題ありません。

A replacement 3025-1000kV brushless motor for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-16 Fighting Falcon 550mm.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-18 Super Hornet 588mm.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.

The OrangeRx R615X offers true DSMX compatibility and utilizes a dual antenna system to provide true signal reception diversity. Due to the previously used IC becoming obsolete, this latest R615X receiver has been redesigned, and now offers improved range and performance. Features that have been retained are the programmable failsafe on binding, ultra-fast brown-out recovery, and wide voltage input range. As we can maintain the same low price as before, this makes the latest R615X still unbeatable value for money.

This optional magnetic release servo for the Durafly Me-163b V2 allows you to determine when to release the take-off dolly, rather than rely on gravity. It is particularly beneficial if you operate your Me-163b off of a bumpy strip where the model may prematurely jump off of the dolly. It is simple and straightforward to install, and the servo lead is normally plugged into the assigned retract socket of your receiver. The unit is supplied with a magnet which needs to be glued into the top of the take-off dolly.

Please note:  This option part is also suitable for earlier versions of the Durafly Me-163.

A replacement 2212-2200KV brushless motor with motor mount, and prop adapter for the Durafly MFX Racer.

A replacement Aerostar G2 30A ESC for the Durafly MFX Racer.

A replacement 3719-770KV brushless motor with X-mount for the Durafly Carbon Arcus F3A aerobatic biplane.

A replacement 5020-550KV brushless motor for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement brushless motor hardware set for the H-King Yak-11 Steadfast Single-Seat Racer that includes a, X-mount, prop-adapter, and other hardware.

This optional EDF nacelle unit will convert your XFLY Swift 2100 into an EDF-powered sport glider. The unit includes the XFLY Galaxy 64mm 12-blade fan, and the powerful XFLY 2840-3200KV brushless motor to give your Swift on a 4S battery an incredible performance. Installation is very straightforward, once installed you will only need to remove the prop and fit the supplied nose cone.

Specs:
Type: XFLY Swift 2100 Sport Glider Optional EDF Unit
Fan: 64mm 12-blade
Motor: 2840-3200KV brushless
Thrust: 1250g
Recommended Battery: 14.8V (4S) 2200~3300mAh LiPo (not supplied)

A replacement 64mm 12-blade EDF unit for the H-King Viper 64 EDF Jet complete with a 2840-2300KV brushless motor.

Replacement 50A ESC w/LED light bar JST connector for the H-King Paramotor V2, this ESC is also suitable for the V1 version.

A replacement 12-bladed fan unit with 1413-5000KV brushless motor for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

The XFLY 1413-5000KV brushless motor combines high-grade materials and precision engineering to produce a high-performance unit. It is designed to be used with the XFLY 40mm EDF unit, but it is also suitable for other applications and is supplied with an adaptor suitable for the XFLY 40mm fan unit.

Suitable as a replacement part for the following XFLY models.

XFLY F-22 Raptor
XFLY Eagle Twin

Recommended Accessories:
800~2600mAh 4S LiPo battery
15~20A Brushless ESC

A replacement pair of 20A brushless ESC with XT60 and other connectors for the XFLY F-22 Raptor Twin 40mm EDF Jet 702mm.

A replacement standard rotation 9g metal geared servo with 100mm servo lead for XFLY models.

A replacement standard rotation 9g metal geared servo with 200mm servo lead for XFLY models.

A replacement reverse rotation 9g metal geared servo with 200mm servo lead for XFLY models.

A replacement 70mm fan unit with 2860-2100KV inrunner brushless motor for the 1042mm H-King FLYCAT V2 70mm 12-Blade EDF Jet.

A replacement 2860-2100KV brushless inrunner motor for the 1042mm H-King FLYCAT V2 70mm 12-Blade EDF Jet.

A replacement Aerostar 80A RVS G2 ESC with connectors for the 1042mm H-King FLYCAT V2 70mm 12-Blade EDF Jet.

A replacement 13g metal-geared servo for the Avios Kobuz Sports-Scale Aerobatic Glider. Used for the ailerons, rudder, and elevator controls.