パワーシステム

The ER6GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 6 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER6G features a dual-antenna with telemetry power of up to 50mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8G receiver has been specially designed for glider pilots who require a compact and slim receiver. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8G features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The ER8GV receiver has been specially designed for glider pilots who require a compact and slim receiver with a built-in high-precision air pressure vario. It can drive up to 8 servos and has built-in receiver voltage telemetry and flight battery telemetry with the ability to automatically detect which voltage input to use. The ER8GV features a dual-antenna with telemetry power of up to 100mw and works quite happily with a 1S Lipo receiver battery.

The RADIOMASTER Pocket is a small, lightweight radio that packs a big punch and is full of features. It is available in two versions, ExpressLRS and CC2500 (see "Specs" for details), and both versions come with the cutting-edge EdgeTX firmware preinstalled. Also, both versions are available in either an FCC version or a European LBT version, once again, please check the "Specs" below for the supported protocol. For easy transport and storage, the lightweight Pocket transmitter is equipped with removable stick ends and a foldable antenna. It is also compatible with the popular 18650 batteries, these provide a long battery life for hours and hours of fun.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

The RadioMaster Ranger is the pinnacle of ExpressLRS module design, it is not only built to last but looks great as well. It has a rugged CNC machined aluminum case that aids the high-efficiency cooling system as a heat sink. Other features are a state-of-the-art high-contrast OLED display, a directional menu key, and two assignable shortcut keys, this makes the Ranger easily adjustable while flying. The Ranger ELRS module is up to any task and provides all the necessary power and functionality.

Want to experience the efficiency, long range, and low latency of the ELRS protocol without purchasing a new radio? Then RADIOMASTER has you covered!

The Ranger Nano 2.4GHz ELRS module represents the cutting edge in ELRS technology, and it's compatible with the RADIOMASTER Zorro series and more. It features F-1000Hz refresh rates, a high-efficiency cooling system, WiFi, and Bluetooth connectivity, and a T antenna. Enjoy all that ELRS has to offer with a RADIOMASTER Ranger Nano TX module.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

The RADIOMASTER MT12 is a pioneering open-source surface radio, and the first surface radio officially supported by the EdgeTX and ExpressLRS multi-module project. The MT12 is available as either an ELRS or 4-in-1 multi-module version (see specs) and boasts 10 physical inputs, and the capability to handle either 16 or 32 channels (4-in-1 version only). The ELRS (ExpressLRS) version is designed to provide a reliable long-range, ultra-fast response, super low latency, and high refresh rates. ELRS is a revolutionary open-source protocol taking the R/C industry by storm. Each version is also available in either an FCC version or a European LBT version, please check the specifications below for the supported protocol.

A replacement 5020-550KV brushless motor for the H-King Yak-11 Steadfast Single-Seat Racer.

A replacement brushless motor hardware set for the H-King Yak-11 Steadfast Single-Seat Racer that includes a, X-mount, prop-adapter, and other hardware.

This optional EDF nacelle unit will convert your XFLY Swift 2100 into an EDF-powered sport glider. The unit includes the XFLY Galaxy 64mm 12-blade fan, and the powerful XFLY 2840-3200KV brushless motor to give your Swift on a 4S battery an incredible performance. Installation is very straightforward, once installed you will only need to remove the prop and fit the supplied nose cone.

Specs:
Type: XFLY Swift 2100 Sport Glider Optional EDF Unit
Fan: 64mm 12-blade
Motor: 2840-3200KV brushless
Thrust: 1250g
Recommended Battery: 14.8V (4S) 2200~3300mAh LiPo (not supplied)

31ミリメートル合金プロップナット/スピナースイート6ミリメートルスレッド（アルマイトシルバー）

身長：30ミリメートル
幅：31ミリメートル
ねじサイズ：10ミリメートル
ねじ深さ：25ミリメートル

31ミリメートル合金プロップナット/スピナースイート10ミリメートルスレッド（アルマイトシルバー）

身長：30ミリメートル
幅：31ミリメートル
ねじサイズ：10ミリメートル
ねじ深さ：25ミリメートル

31ミリメートル合金プロップナット/スピナースイート8ミリメートルスレッド（アルマイトブラック）

身長：30ミリメートル
幅：31ミリメートル
ねじサイズ：10ミリメートル
ねじ深さ：25ミリメートル

プロップナット/スピナー22ミリメートル合金10x1.0

プロップナット/スピナー22ミリメートル合金M10x1.25

プロップナット/スピナー22ミリメートル合金M5x0.8アルマイトブラック

プロップナット/スピナー22ミリメートル合金M7x1.00アルマイトブラック

プロップナット/スピナー22ミリメートル合金の3/8 "-24アルマイトブラック

プロップナット/スピナー22ミリメートル合金M5x0.8アルマイトレッド

プロップナット/スピナー22ミリメートル合金M8x1.00アルマイトレッド

22ミリメートル合金プロップナット/スピナースイート10ミリメートルスレッド（アルマイトレッド）

身長：20ミリメートル
幅：22ミリメートル
ねじサイズ：10ミリメートル
ねじ深さ：20ミリメートル

直径18mmモーターマウント - Inrunnerモーター用クランプスタイル

スペック。
直径：18ミリメートル（130サイズInrunnerに適合）
長さ：31ミリメートル
重量：8グラム

WalkeraのF210レーシングクワッド- DEVO-RX713レシーバー

型番：F210-Z-25

Durafly™エクスカリバー-アエロスター3542-800KVブラシレスアウトランナーモーター

アエロスター3542 800Kvモーターは、実際の大国であり、Duraflyエクスカリバーのためのパンチを提供します。

あなたはパワードグライダーや暖かいライナーのための素晴らしいパフォーマンスを探しているなら、このモーターは素晴らしい選択肢です。

仕様：
サイズ：3542
KV：800KV
シャフト径：5.0ミリメートル
ボルト穴：25ミリメートルと19ミリメートル
ボルトねじ：M3
重さ：174グラム
モータープラグ：3.5ミリメートルブレットコネクタ