パワーシステム

A replacement 3720-900KV brushless motor with prop shaft for the H-King MX2 Extreme 30E.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.

Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.

The Plush-32 Brushless ESC programming card is designed to make life easy. No more listening to the beeps, and guessing when to move your throttle to make changes to your ESC settings. This programming card changes settings with the press of a button, and easy-to-read LED’s let you know exactly how your ESC has been programmed. This programming card is a must for your Plush-32 series brushless ESC.

Now with the updated Rev1.1.0 firmware, this program card offers a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available for the 150A ESC). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this delay can be set from between 1 and 10mins using this program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use this programming card to program earlier versions of the Plush 32 series but only ESC's with the Rev1.1.0 firmware will show the revised functions.

ホビーキングスイスJ-3パイパーカブ用のプロペラアダプター付きの交換用3648-700KVブラシレスモーター。

注意：これらのパーツは、ホビーキング1400mm J-3カブの以前のバージョンに適合します。もちろん、色は、該当する場合は異なります。

A replacement 3108-1070KV brushless motor for the H-King Reno Aces P-51 "Galloping Ghost", this is the standard motor that is supplied with the PNF model.

The FTr10 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a double-antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr10 is a small, lightweight 2.4GHz receiver that will accept a wide input voltage of between 3.5~18V, has an incredible range in interference-free open areas of up to 10km, and its unique design includes i-BUS, S-BUS, PPM, PWM, and UART data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18 radio system. With all these features it is the perfect choice for drone flying, drone racing, FPV, and other long-range applications.

The FTM302 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, a bidirectional transmission system in a compact design with support for multiple signal inputs. Supports external power and is compatible with standard JR-type module bays.

The FTM302 offers a long range of up to 3.5km + on the EU default setting of 20dBm (changeable through the management system), low latency, less than 10ms, and allows for online updates and managing the module via the FLYSKY Remote Control Assistant. Power to the module can either be internal, or an external power source of 5~28V can be connected via the built-in XT30 connector. The module also has a built-in fan which automatically turns on if the temperature reaches 45°C to ensure the system remains safe, this can happen when the module is being used with higher voltages.

The FTr4 adopts FLYSKY's third-generation automatic frequency hopping digital system, AFHDS 3. It uses a single antenna, bidirectional transmission system to save space and supports standard PPM, S-Bus, and i-Bus signals.

The FTr4 is a small, lightweight 2.4GHz receiver that will accept an input voltage of between 3.5~8.4V, has a range in interference-free open areas of up to 500m, and its unique design includes i-BUS, S-BUS, PPM, and PWM data ports. It has the ability to update firmware online and is compatible with the FLYSKY Paladin PL18, and NB4 radio systems. With all these features it is the perfect choice for drone flying, gliding, and small fixed-wing aircraft.

ホビーキングリノエーシズP-51「ギャロッピングゴースト」のスピードとパワーをさらに高めたいですか？ 次に、このオプションのハイパワーPro 3108-1160KVブラシレスにアップグレードして、無制限の垂直性能を備えた弾道ミサイルに変えます。 付属のプロペラやESCを変更する必要はありません。どちらもこのアップグレードで問題ありません。

A strong, flexible, transparent fuel tank that is suitable for most types of RC models. The fuel tank includes a machined metal cap with fuel feed, a flexible fuel feed pipe with clunk weight, and 2 factory-installed machined metal 90° hose attachment nipples. One of these is for filling the tank, and the other is used for pressure or venting. Each fuel tank comes with a Turnigy sticker that includes the capacity of the tank, this can be attached to the tank in a convenient position to remind you of its size. The fuel tank is suitable for use with both gas and nitro fuels.

An optional CNC, anodized metal folding handle that will fit most of the RADIOMASTER multi-protocol series of transmitters.

Complement your RADIOMASTER TX16S transmitter with these very smart and comfortable leather side grips. These grips are made of brown leather,  other colors are available.

A replacement crankshaft set for the Turnigy TP10 10cc gas engine. This set includes the crankshaft, conrod, prop-driver woodruff key, and prop nut.

A replacement crankcase set for the Turnigy TP10 10cc gas engine, this set includes the crankcase, gasket, and 2 x screws.

A replacement prop driver set for the Turnigy TP10 10cc gas engine. This set includes the prop driver with inset magnet, prop washer, and woodruff key.

A replacement crankcase for the Turnigy TP26 26cc gas engine.

A replacement 3025-1000kV brushless motor for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

A replacement ORX 3-Axis gyro for the Durafly Prime Tundra PT1200 STOL Trainer-Sports Model.

Features:
• Gyro stability for roll, pitch, and yaw
• Small and lightweight
• Easy set-up
• 3 modes: Gyro off/Gyro on/Trainer mode

Gyro off means no stabilization from the gyro at all. Gyro on gives some gyro stability and full control surface deflection. Trainer mode gives a lot more gyro stability, and also limits the amount of control deflection, will also self-right the model to a normal flying attitude.

この信頼性の高い軽量スイッチモードUBECは、小さなFETトランジスタを使用して、入力電力を1秒間に約150,000回切り替え、非常に安定した滑らかなDC電圧を生成します。 6V〜25V（2S〜6S）の入力電力を処理でき、ジャンパーを介して出力を選択して、5V / 6A、5.5V / 6A、または6V / 6Aの定電流を供給することができます。

A replacement 2627-1000KV brushless motor with X mount and screws for both versions of the Avios C-130 V2, also suitable for the version 1 of the C-130.

Accurately drill your propellers for your TP 35cc gas engine with this easy-to-use drilling jig. The jig is CNC machined from aluminum stock and is supplied with a clamping screw to hold the propeller secure whilst drilling.

LCDインターフェースを備えたこのユーザーフレンドリーな多機能プログラムボックスにより、HobbyWingブラシレスESCのプログラミングが非常に迅速かつ簡単になります。プログラミングでは、2つの方法で使用できます。まず、LCDインターフェイスを使用してESCを設定するために単独で使用できます。次に、USBアダプターとして使用してESCをPCにリンクし、PCを介したプログラミングを可能にし、ESCファームウェアを更新することができます。また、LiPo、Li-Ion、およびLi-Feバッテリーパックの電圧を測定するための電圧計として使用できる別の機能もあります。パックを接続すると、完全なパック電圧と個々のセルが表示され、2〜8Sのバッテリーパックに適しています。

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-16 Fighting Falcon 550mm.

A replacement 4S 50mm 12 blade ducted fan unit with brushless motor for the H-King F-18 Super Hornet 588mm.

A replacement 2836-2200Kv brushless motor with prop adapter for the Durafly Me-163B V2 "White 10".

Please note: This replacement part is also suitable for earlier versions of the Durafly Me-163.