船

最初的 Aquaholic 以其令人瞠目的性能和美观的外观而令人眼前一亮，随后推出的 V2 版本配备了更强大的无刷系统，并重新设计了上层建筑。现在，我们又迎来了 V3，它采用了新的亮橙色配色方案，偏移方向舵带来了更好的转弯性能，重新定位的动力系统实现了更好的重量分配，透明塑料回收鳍通过螺栓固定在方向舵顶部，可在船只意外翻转时提供转向控制。

A pair of hatch-sealing rubber gaskets that will fit either the Aquaholic V2 or the V3 brushless racing boat.

A replacement aluminum alloy rudder unit and rudder support set for the Aquaholic V3 brushless racing boat.

A replacement aluminum alloy rudder support set for the Aquaholic V3 brushless racing boat.

A pair of rubber bellows for waterproofing the pushrod exits that will fit either the Aquaholic V2 or the V3 brushless racing boat.

A replacement coupler for connecting the motor to the 4mm flexi-shaft that will fit either the Aquaholic V2 or the V3 brushless racing boat.

A replacement 4mm flexi-shaft set for the Aquaholic V3 brushless racing boat.

A replacement drive shaft support set that will fit either the Aquaholic V2 or the V3 brushless racing boat.

A replacement rudder pushrod for the Aquaholic V3 brushless racing boat.

A replacement P1.4x37mm 3-blade polished metal propeller that will fit either the Aquaholic V2 or the V3 brushless racing boat.

A replacement short 5mm flexi-shaft for the 2024 version of the HydroPro Inception. Please see the attached pictures for the version that this suits.

セイルウィンチサーボ13キロ/ 0.7sec（360deg）/ 55グラム

スペック。
重量：55グラム
外形寸法：40.5 X 20.2 X 38ミリメートル
速度：0.9sec / 360deg（4.8V） - 0.7sec / 360deg（6.0V）
トルク：11kg.cm（4.8V） - 13kg.com（6.0V）
動作電圧：4.8 - 6.0V
歯車列： メタル

この小型軽量4chの各スイッチは、モデルのすべての種類にauxillaryの機能のために非常に便利です。 auxillaryに単一のリードを差し込みは、その後、電子スイッチのチャンネル1は一旦auxillaryスイッチアクティブ、サイクルとなり、チャネル1が消灯し、チャンネル2は、もう一度と2が行くサイクルスイッチ、オンになるにあなたのラジオを切り​​替える機能を切り替えますそれはラジオのスイッチを切った後、1を毎回流すようにデフォルト設定されますバックユニットをオンにすると1チャネルに戻ってくるまでアウトとチャネル3は、というようにしています。このユニットは、点灯と消灯や他の低電流スイッチングアプリケーションに最適です。

ご注意：このスイッチを正常に動作させるには、あなたが+に関連するチャネルの旅行を設定する必要があります- 100％。

仕様：
入力電圧：4.8〜7.4V
出力電圧：4.8〜7.4V
最大電流：2アンペア
長さ：40ミリメートル
幅：20ミリメートル
身長：12ミリメートル
重量：7グラム
入力ケーブル：21センチメートル（JR型プラグ）

The Turnigy TGY-WP23 is one of the latest standard size servos that has an aluminum center case which acts as a heatsink and gears made of titanium and steel. This servo has a digital amplifier which helps it achieve an incredible 23kg of holding power and is no slouch in the speed department either with a speed of 0.12sec.

The 9iMOD BLS-HV20KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV20KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 20kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV30KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.075sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV30KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 30kg, and a speed of 0.06sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV40KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck servo at an affordable price. The aluminum center case offers strength and heat dissipation, and the servo is also completely waterproof. This dual ball-raced servo is powerful and fast, on a 7.4V power supply it will give you a torque of 40kg, and a speed of 0.085sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than RC cars including robotics, etc.

The 9iMOD BLS-HV50KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV50KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 50kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV60KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you a torque of 60kg, and a speed of 0.11sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV70KG-180 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you an amazing torque of 70kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD BLS-HV70KG-270 digital high torque, high voltage brushless metal geared servo is a quality and reliable car/truck/robotic servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it does require a separate power supply of between 10~15V, and on a 14V supply, it will give you an amazing torque of 70kg, and a speed of 0.09sec/60°. Unlike most other servos with a travel of around 160°, this servo can travel up to a whopping 270° which makes it even more versatile for loads of uses other than cars including robotics, etc.

The 9iMOD DS35MG digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 35kg, and a speed of 0.25sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DS35MG digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The full aluminum case offers strength and heat dissipation, and the servo is also waterproof to IP67 standards. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 35kg, and a speed of 0.25sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 270° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DSC55MG-180 digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The servo is waterproof to IP67 standards, and it also includes an aluminum center for heat dissipation, a high-precision magnetic encoder sensor, and a coreless motor. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 55kg, and a speed of 0.09sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 180° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

The 9iMOD DSC55MG-270 digital high torque metal geared servo is a quality and reliable car/truck servo at an affordable price. The servo is waterproof to IP67 standards, and it also includes an aluminum center for heat dissipation, a high-precision magnetic encoder sensor, and a coreless motor. This dual ball-raced servo is very powerful and fast, it will give you an amazing torque of 55kg, and a speed of 0.09sec/60° when using a 7.4V power supply. Unlike most other servos with a travel of around 160°, this servo can travel up to an amazing 270° which makes it even more versatile for loads of uses other than cars including boats, robotics, etc.

H-キングマリンスコットフリー、執拗なV1＆V2、Aquaholicレーシングボートの交換アルミラダーアセンブリ。

H-キングマリンスコット無料＆リレントレスV2レーシングボート交換P1.4のx 37ミリメートル3ブレードメタルプロペラ。

H-キングマリンスコット・フリーレーシングボートの交換フレキシシャフトセット。

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Hatch Sealing Rubber Gasket (2pcs).

HydroPro Inception Brushless RTR Deep Vee Racing Boat Replacement Drive Shaft Support Set.