バッテリー/充電器

ToolkitRC M6DAC は、充電、同期充電、放電、サイクリング、消費者向けスマート ドローン バッテリー充電などの機能を統合し、多言語のユーザー インターフェイスを備えた、汎用性の高いデュアル バッテリー充電器です。 M6DAC には 200W の電源が内蔵されており、100 ～ 240V の AC 主電源から電力を供給できます。また、飛行場、競馬場、ボート湖での充電に最適な 7 ～ 28V DC 電源で動作する機能もあります。

ToolkitRC M7 は、充電、放電、サイクリング、抵抗測定、信号テスト/信号源 (PWM/PPM/SBUS)、マルチメーター、スマート コンシューマー グレードのドローン バッテリー充電などの機能を統合した、汎用性の高い多機能ツールです。 . M7 は軽量でコンパクトで、7 ～ 28 V の DC 電源で動作するため、飛行場、競馬場、ボート遊びの湖での充電に最適です。

ToolkitRC M4AC は、LiPo、LiFe、および Li-ion バッテリー用の使いやすく、実用的で、簡単なバランス充電器です。 AC 主電源 (100~240V) のみの充電器で、1~4S バッテリーパックを最大 2.5A、最大 30W で充電できます。

ToolkitRC M6D は、充電、同期充電、放電、サイクリング、消費者向けのスマート ドローン バッテリー充電などの機能を統合した汎用性の高いデュアル バッテリー充電器であり、多言語ユーザー インターフェイスも備えています。 M6D は DC ユニットのみであるため、7 ～ 28 V DC の入力電圧が必要です。これにより、飛行場、競馬場、ボート湖での充電に最適です。ワークショップで使用する場合は、正しい DC 電圧と 30A の電流を供給できる主電源に接続できます。

ToolkitRC M8S は、充電、放電、抵抗測定、信号テスト/サーボ用信号源、受信機テスト、PWM/PPM/SBUS、ESC 電力計、消費者向けスマート ドローン バッテリー充電などの機能を統合した多機能多機能ツールです。などなど。 M8S は DC ユニットのみであるため、7 ～ 30 V DC の入力電圧が必要です。これにより、飛行場、競馬場、ボート湖での充電に最適です。ワークショップで使用する場合は、正しい DC 電圧と 18A の電流を供給できる主電源に接続できます。

ToolkitRC SC100 アダプター ケーブルは、最大 100W の USB-C 電源から XT60 入力コネクタを備えた低ワット バッテリー充電器またはその他のデバイスに電力を供給するために使用されます。

仕様:
タイプ: ToolkitRC SC100 XT60~USB-C プロトコル ケーブル
入力: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
出力電圧：最大5～20V
出力電流: 最大 5A
出力コネクタ: XT60
長さ: 50cm
重量：35g

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The ToolkitRC Q6AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q6AC has a built-in 400W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~30V DC external power source of up to 1000W (input connection XT90) which is perfect for extreme fast charging at the flying field, race track, or boating lake. Another feature of the Q6AC is a built-in wireless charging system, so say goodbye to tangled wires. This system supports devices with the ability to wireless charge such as mobile phones, etc at up to a charge rate of 15W.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP7 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 9~32V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP7 can charge two batteries of different chemistry, and different voltages at the same time as it is two chargers in one unit. The LCD screen is split into two to show the information for each battery pack whilst being set up or charged/discharged. Both charging outputs can charge from 0.1~10A and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery pack whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

The Ultra Power UP9 range of chargers uses the latest state-of-the-art technology, is very simple and intuitive to use, and is loaded with lots of features. Their ability to operate from either AC mains or a DC power source of 11~18V means they are extremely versatile, as they can be used at home or when out on the field to charge your batteries.

The UP9 can charge four batteries of the same type and voltage at the same time making it perfect if you use lots of the same batteries to power your models. The large easy-to-read LCD screen shows the information for the battery packs whilst they are being set up, then shows real-time data when the packs are being charged. The charging outputs can simultaneously charge from 0.1~5A up to a max of 50W per port and can charge either 1~6S lithium-type cells (including LiHV), 1~16S NiMH/NiCd, or 1~12S Pb cells.

For several years we have been selling the very popular Bat-Safe charging box, it has been so successful that we can now offer a smaller, more compact version. These double-walled, insulated boxes have been designed by engineers who know how dangerous a LiPo battery fire inside a home can be. The guys at Bat-Safe are RC enthusiasts and came up with a safe and awesome solution to store, transport, and most importantly charge your Lipo batteries. With a double steel wall, fiberglass, and steel wool filter to capture the smoke and soot, they combine to control the intense heat and arrest the flames if ever you are unlucky enough to have a problem whilst charging.

The ToolkitRC M8D is a powerful, versatile, touch-screen unit that integrates functions such as charging, discharging, and balance management for a range of battery types. The M8D is also a dual charger, so it can charge 2 batteries at a time, and these can be different voltages and chemistries. The M8D is a DC unit only, so requires an input voltage of 10~49V DC, this makes it perfect for charging at the flying field, race track, or boating lake. For use in the workshop, it can also be connected to a suitable mains power supply.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), and can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

The ToolkitRC M450 is a simple-to-use, no-nonsense, straightforward balance charger for LiPo, LiFe, and Li-ion batteries. It is an AC mains-powered charger only (100~240V), can charge 2~4S battery packs at up to 5A, and a maximum of 50W.

Setting the type of battery, and the charge current is a simple affair using a single button (short press, and long press actions), and the intuitive, easy-to-read, wide angle, backlit, IPS 1.54" 240x240 pixel LCD screen. The 32-bit ARM processor provides high-precision charging management and gives a balance charge accuracy of <0.005V. Ports include an XT60 charging port, a 2~4S JST-XH balance port, and the standard AC input port.

ToolkitRC U3 Compact 2~3S USB Type C 25W 2A balance charger is an ultra-compact palm-size balance charger, that plugs into your favorite USB mains power supply. No fancy programming with this baby, just plug it into your USB adapter, connect your 2~3S LiPo battery balance lead, switch it on, and instantly it will start a balanced charge. The charge rate is set at 2A and the LED light will glow red when charging, then change to green when the charge is complete.

Features:
• A compact, fixed-rate charger for 2~3S LiPo batteries
• Utilizes any popular USB Type-C power adapter
• The perfect companion for charging items while traveling
• Simple LED light system denotes charging and standby

バッテリーベルクロストラップ（2個/袋）

サイズ：W13mm X L300mm

ボードの使用上のための小型・軽量であるLipoly低電圧アラームを使用するのは簡単、個々の細胞上に低電圧を検出するためのバランスのリードへのプラグ。大音量アラームが鳴り、任意の個々のセルは、以下3.3V以上に低下した場合、LEDが緑色から赤色に変わります。

スペック。
Lipoly範囲：2秒〜4秒
サイズ：38x25x11mm
重量：7グラム
電圧精度：0.03V
低電圧アラームしきい値：3.3V（セルあたり）

EC3男性 - タミヤ女性

JSTは、バッテリーを装備充電するためのXT-60充電リードを変換するために、このアダプタを使用します。

正確なバランサー、放電器と電池モニター。ホビーキングバッテリーメディックは、そのバッテリパックの精度のチェックとバランスを希望するお客様のために高品質のデバイスです。
ユニットは、測定放電とLipolyが6Sまでのパックバランスをとることができます。

スペック。
サイズ：93.5×60×17ミリメートル
バッテリータイプ： リチウムポリマー（2〜6セル）
セル電圧範囲：2.0V〜3.9V
放電：3.0V〜4.2V
200〜450ミリアンペア ：現在のブリード

これは、工場で校正オリジナルのユニットです。

ホビーキング難燃性リポバッテリーバッグ (170x45x50mm) (1個).

このバッグは、超強力な難燃性のグラスファイバー織布で作られており、非常に高い温度にもそれなりの期間耐えることができます。バッグは非常に強力な難燃性の糸で縫い合わされ、フラップは面ファスナーテープで固定されています。

LiPo充電用バッグとしてはもちろん、万が一の際にバッテリーをモデルに装着した状態で包み込むのにも最適です。

HobbyKing®™防炎LiPolyバッテリーバッグ（フラット）（230x140mm）（1個）

これらの袋は、超強力な難燃性ガラス繊維織物で作られており、合理的な期間のための非常に高い温度に立ちます。バッグは非常に強い難燃性糸で縫合されており、フラップは、フックおよびループテープで適所に固定されます。

LiPoly充電バッグとして最適です。

仕様：
材質： 難燃性ガラス繊維織布
長さ：230ミリメートル
幅：140ミリメートル
身長： フラット
重量：49.5グラム

Turnigy®防炎LiPolyバッテリーバッグ（ジッパー付き）（200x155x95mm）（1個）

これらの袋は、超強力な難燃性ガラス繊維織物で作られており、合理的な期間のための非常に高い温度に立ちます。バッグは非常に強い難燃性糸で縫合し、ジッパー式の蓋を持っています。

仕様：

材質： 難燃性ガラス繊維織布
長さ：200ミリメートル
幅：155ミリメートル
身長：95ミリメートル
重さ：140グラム

Turnigy®防炎LiPolyバッテリーバッグ（120x53x42mm）（1個）

これらの袋は、超強力な難燃性ガラス繊維織物で作られており、合理的な期間のための非常に高い温度に立ちます。バッグは非常に強い難燃性糸で縫合されており、フラップは、フックおよびループテープで適所に固定されます。

袋を充電LiPolyとして理想的な、しかし厄介なが今まで発生した場合、それはあなたのモデルにインストールされている場合、お使いのバッテリーを包むためのすばらしいです。

仕様：
材質： 難燃性ガラス繊維織布
長さ：120ミリメートル
幅：53ミリメートル
身長：42ミリメートル
重量：41.5グラム

LiPoly batteries are a fantastic power source for all of our RC needs, but do need to be treated with respect due to their phenomenal energy density.

The golden rule when charging LiPoly packs is never to leave them unattended, but you can improve on this by using one of these fire retardant charging bags so that, should a mishap occur any conflagration will be contained within the bag and cannot impinge on surrounding surfaces.

These bags are made of super strong fire retardant fiberglass woven fabric and will stand very high temperatures for a reasonable period of time. The bags are stitched together with an extremely strong fire retardant thread and the flap is secured in place with hook and loop tape.

Features:
• Tough, fire retardant construction
• Large size for bigger packs
• Hook and Loop top fastenong
• Easy to store when not in use

Specs:
Material: Fire retardant fiberglass woven fabric
Length: 330mm
Width: 250mm
Weight: 135g