バッテリー/充電器

4mm Solder Type Banana/Charge Plug (2 pairs).

XT60 Male to 2 x DC Jack Plug Connectors 220mm (2pcs)

Specs:
Connector 1: XT60 Male
Connector 2: 2 x DC Jack Plug
Length: 220mm
Weight: 16.7g each
Quantity: 2pcs

These are good quality balance lead extensions with a 5S JST-XH male connector on one end and a female on the other.

SKYRC IMAX B6は、LiIon、LiPo、LiFe（A123）、NiCd、NiMH、およびPbバッテリーの充電、バランス調整、および放電が可能な、常に人気のある高度な充電器でしたが、V2ではさらに優れています。これは、すべての最高の充電器と同じようにマイクロプロセッサで制御され、Li-XXバッテリーの個々のセルに加えてさらに多くのバランスを取ります。 B6 V2はDCのみの入力充電器であり、バッテリーまたはAC主電源のいずれかから供給できる11〜18VのDC入力が必要です。

XT30U Silicone Charge Lead with 4mm Banana Plugs.

XT60 Male w/12AWG 100mm Silicone Wire (5pcs).

The SKYRC BD250 is a powerful discharging unit that allows the user to discharge a battery pack at up to 35 amps or 250 watts, it also measures and compares their performance. The BD250 has the ability to discharge, test, and analyze virtually any type and size of battery, regardless of chemistry and the number of cells up to a voltage of 35V.

An excellent, low resistance, flexible silicone charge lead with standard 4mm banana plugs on one end and a set of XT150/AS150 on the other. The Amass XT150/AS150 is a 7mm anti-spark connector rated at up to 150amps, and the 4mm banana plugs suits most chargers on the market today.

Specs:
Battery Connector: XT150/AS150 (7mm)
Charger Connection: 4mm Banana Plug
Wire Diameter: 14AWG
Wire: Tinned copper
Wire Insulation: Silicone rubber
Length: 300mm
Weight: 37.3g

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TRA connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC5 connectors for the main charging leads, an XT60 lead to plug into the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with TR connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

Designed in-house by HobbyKing, this Turnigy parallel charge board can charge up to 6 LiPo or LiHV packs of the same capacity and cell count at the same time. The board is supplied with EC3 connectors for the main charging leads, a pair of 4mm banana plugs to connect to the charger, and 2~6S JST-XH connectors for the balancing leads. The board is fused for protection and a 6S JST-XH adaptor lead is also supplied to connect the board to your charger balancing input.

This compact adapter is perfect to convert an HXT3.5mm equipped battery to an XT60, or an XT60 charge lead to HXT3.5mm.

Specs:
Connector 1: HXT3.5mm
Connector 2: XT60 female
Weight: 15g (each)
Quantity: 2pcs

A compact battery adapter to convert a T-Connector battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC5 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an EC3 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT60 battery lead to a TR output, compatible with similar types of connectors.

A compact battery adapter to convert an XT90 battery lead to a TR output, compatible with similar types of connectors.

ToolkitRC M7AC は、充電、放電、サイクリング、信号テスト/信号源 (PWM/PPM/SBUS)、マルチメーター、消費者向けスマート ドローン バッテリー充電、カスタマイズ可能な多言語音声アラート、などなど。 M7AC は軽量、コンパクトで、電源を内蔵しているため、100 ～ 240V の AC 主電源で動作します。また、飛行場、競馬場、ボート湖での充電に最適な 7 ～ 28V DC 電源で動作する機能もあります。

ToolkitRC M4 Pocket は超コンパクトな手のひらサイズのバランス充電器で、小さいサイズにもかかわらず、最大 80W で 1~4S のバッテリー パックを充電できます。シンプルで直感的に使用でき、読みやすい広角の IPS 1.54 インチ x 240 x 240 ピクセルのフルカラー LCD 画面と、シンプルな単一のプログラミング ボタンを備えています。

ToolkitRC MC8 高度な多機能バッテリー チェッカーは、機能が満載で、大きなカラー画面でバッテリーの状態を一目で確認できます。 1セルから8セルまでのバッテリーパックの状態確認、ワンタッチバッテリーバランス機能、PWM、PPM、SBUSの出力信号の読み取りが可能なレシーバーチェッカーとしての多機能チェッカーです。 PWM 出力はサーボ テスターとしても使用でき、MC8 は USB-C 20W 出力ポートを介してモバイル デバイスを高速充電することもできます。

ToolkitRC M6DAC は、充電、同期充電、放電、サイクリング、消費者向けスマート ドローン バッテリー充電などの機能を統合し、多言語のユーザー インターフェイスを備えた、汎用性の高いデュアル バッテリー充電器です。 M6DAC には 200W の電源が内蔵されており、100 ～ 240V の AC 主電源から電力を供給できます。また、飛行場、競馬場、ボート湖での充電に最適な 7 ～ 28V DC 電源で動作する機能もあります。

ToolkitRC M4AC は、LiPo、LiFe、および Li-ion バッテリー用の使いやすく、実用的で、簡単なバランス充電器です。 AC 主電源 (100~240V) のみの充電器で、1~4S バッテリーパックを最大 2.5A、最大 30W で充電できます。

ToolkitRC SC100 アダプター ケーブルは、最大 100W の USB-C 電源から XT60 入力コネクタを備えた低ワット バッテリー充電器またはその他のデバイスに電力を供給するために使用されます。

仕様:
タイプ: ToolkitRC SC100 XT60~USB-C プロトコル ケーブル
入力: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
出力電圧：最大5～20V
出力電流: 最大 5A
出力コネクタ: XT60
長さ: 50cm
重量：35g

Turnigy has moved into the next decade of the 21st century with the T240 touchscreen charger. It can charge Lipo/Lilo/LiFe/LiHV/NiMH/NiCd and lead acid batteries. It also has battery management, security settings, and operation data memory, and can charge two different battery chemistries simultaneously. Programming is very straightforward by using the 3.2-inch color LCD touchscreen display.

Tired of being stuck with the basic USB charger for your TRX4M batteries? Well, we've got just the solution! This handy little charge lead converts your TRX4M battery plug to a JST and 2S balance plug for use with standard, hobby-grade battery chargers. Now you can not only charge with ease but also properly store your batteries by utilizing your charger's storage mode.

Tired of being stuck with the basic USB charger for your TRX4M batteries? Well, we've got just the solution! This handy little charge lead converts your TRX4M battery plug to an XT60 and 2S balance plug for use with standard, hobby-grade battery chargers. Now you can not only charge with ease but also properly store your batteries by utilizing your charger's storage mode. 

The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M6DAC is a versatile dual battery charger that integrates functions such as charging, synchronous charging, discharging, cycling, smart consumer-grade drone battery charging and has a multilingual user interface. The M6DAC has a built-in 200W power supply that allows it to be powered from a 100~240V AC mains power source. It also can operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC Q4AC is a 4-channel (Quad) smart charger that will independently charge/discharge 4 batteries at the same time. The Q4AC has a built-in 100W power supply that allows it to be powered from a 100~240V AC mains power source. It also has the ability to operate on a 10~18V DC power supply which is perfect for charging at the flying field, race track, or boating lake.

The ToolkitRC M7AC is a versatile, multifunction tool that integrates functions such as charging, discharging, cycling, signal test/signal source (PWM/PPM/SBUS), multimeter, smart consumer-grade drone battery charging, customizable multi-language voice alerts, and so much more. The M7AC is lightweight and compact, and it has a built-in power supply so that it can operate from a 100~240V AC mains power source. It also has the ability to operate on a 7~28V DC power supply which is perfect for charging at the flying field, race track, or boating lake.