割引セール

A replacement carbon wing spar for the H-King F-18 Hornet 588mm.

An upgraded nosewheel landing gear retract set for the Avios KingTwin Sport/Scale Turboprop. This upgraded assembly has been manufactured with a different composition for the plastic parts which is harder. Also, the pushrod linkage has been made of thicker, stronger steel for more durability.

The Aerostar RVS G2 next-generation range of HV Opto brushless speed controllers moves these amazing ESCs up a notch from the ground-breaking original Aerostar RVS HV ESCs. New generation MOSFETs with the aid of the highly efficient cooling fan and finned, aluminum heatsink, ensure that the ESC stays within operating temperatures at all times, and can also safely handle the peak current draw specified. They process much faster due to the high-performance 32bit M4 microprocessor running at 170MHz, and have improved functionality and programmable features. Our RVS (reverse function system) is now instantaneous, with no need for the motor to stop turning, this makes it perfect for EDF braking (reverse thrust), and waterplanes for taxiing, etc. If you don't require the reverse function, simply do not connect the second lead to your receiver, it will then operate as a standard ESC.

ToolkitRC SC100 アダプター ケーブルは、最大 100W の USB-C 電源から XT60 入力コネクタを備えた低ワット バッテリー充電器またはその他のデバイスに電力を供給するために使用されます。

仕様:
タイプ: ToolkitRC SC100 XT60~USB-C プロトコル ケーブル
入力: USB-C 5.0~20V@PD2.0/PD3.0/QC2.0
出力電圧：最大5～20V
出力電流: 最大 5A
出力コネクタ: XT60
長さ: 50cm
重量：35g

A replacement 10x8 3-blade propeller for the Durafly Auto-G2 V2 Gyrocopter.

Please note: This replacement part is a suitable replacement for previous versions of the Auto-G2.

A replacement aluminum alloy rudder support set for the Aquaholic V3 brushless racing boat.

A replacement coupler for connecting the motor to the 4mm flexi-shaft that will fit either the Aquaholic V2 or the V3 brushless racing boat.

A replacement pair of wing interplane struts for the Durafly Carbon Arcus F3A aerobatic biplane.

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP2 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the RP2 V2 are improved solder pads and a super lightweight built-in ceramic antenna.

The RP3 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The ExpressLRS development team designed the Nano receivers, which feature the ESP8285 MCU and SX1280 RF chips. This offers Lora and FLRC 2.4GHz RF links for incredible range and low latency. WiFi is built-in to easily upgrade the firmware and configure the receiver using your PC or mobile phone.

The receiver features a Skyworks SE2431L providing an LNA for improved receiver performance, a PA providing up to 100mW of telemetry performance, and antenna switching for antenna diversity.. The RP3 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

A replacement short 5mm flexi-shaft for the 2024 version of the HydroPro Inception. Please see the attached pictures for the version that this suits.

A replacement fuselage with wiring for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement pair of wings with flaps and ailerons for the grey XFLY Alpha Jet.

A replacement pair of wings with flaps and ailerons for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the grey XFLY Alpha Jet.

A replacement pair of horizontal stabilizers for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the grey XFLY Alpha Jet.

A replacement vertical stabilizer with rudder for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement gun pod for the grey XFLY Alpha Jet.

A replacement gun pod for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement set of wheels for the XFLY Alpha Jet (3pcs).

A replacement wing spar for the XFLY Alpha Jet.

A replacement screw set for the XFLY Alpha Jet (12pcs).

A replacement set of control horns for the grey XFLY Alpha Jet (5pcs).

A replacement set of control horns for the blue "Patrouille de France" XFLY Alpha Jet (5pcs).

A replacement front oleo strut with wheel for the XFLY Alpha Jet.

A replacement oleo strut with wheel and left side gear door for the grey XFLY Alpha Jet.

A replacement oleo strut with wheel and left side gear door for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement oleo strut with wheel and right side gear door for the grey XFLY Alpha Jet.

A replacement oleo strut with wheel and right side gear door for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement retract unit with oleo strut, wheel and left side gear door for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement retract unit with oleo strut, wheel and right side gear door for the blue "Patrouille de France" XFLY Alpha Jet.

A replacement horizontal stabilizer rotating actuating shaft for the XFLY Alpha Jet.

A replacement multi-connector system for the XFLY Alpha Jet (2pcs).