飛行機

Durafly™エクスカリバー- V-テールセット

Durafly™エクスカリバー-スロープ高騰ノーズコーン

Durafly™エクスカリバー-カウル

Durafly™エクスカリバー-トップテールプレート

Durafly™エクスカリバー-プロペラシャフト/アダプタ

Durafly™エクスカリバー-デカールセット

セイウチは非常に安定したチラシであり、飛ぶのはとても楽しいですが、セイウチと同じように素晴らしく、その日の日没時に楽しみは終わりました。さて、あなたはナイトセイウチで空を照らしているので、もうありません。

ナイトセイウチのためのスペアパーツ - メインウィング

ナイトセイウチのためのスペアパーツ - 胴体

ナイトセイウチのためのスペアパーツ - 水平スタビライザー

HobbyKing®™セイウチ-スペアパーツ-垂直フィンとラダー

HobbyKing®™セイウチ-スペアパーツ-水平スタビライザー

HobbyKing®™セイウチ-スペアパーツ-ウイングスパー

仕様：
長さ：300ミリメートル
直径：5.5ミリメートル（真ん中の7.8ミリメートル）

HobbyKing®™セイウチ-スペアパーツ-メインウィングステッカーセット/ワット

実物大のASW28は、最新の繊維強化複合材で作られた15メートルのスパンを備えたスタンダードクラスのグライダーです。 ASW28のメーカーはアレグザーンダー・シュライカー・GmbH＆Coです。「W」は、これが影響力のある多作のドイツ人デザイナー、ガーハード・ウェーベルによって設計されたことを示しています。 2000年に連続生産を開始。

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 1600 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Take to the skies with this durable glider with optional FPV camera mounting. The Ranger 2000 is easy to assemble and features a large wingspan for stability in the air. The airfoil wings are fitted with two spars to strengthen the wings in high wind situations. Use the wing clips to click and plug the wings into the fuselage. After flying, simply squeeze the clips to release the wings and easily store the plane in your car.

Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling.

Looking for the perfect RC trainer plane? How about a smooth RC glider or an inexpensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The HobbyKing Bixler 2 does all that and more! This electric RC plane has undergone some major improvements including (but not limited to) bigger air inlets for better motor cooling of the uprated motor for even better performance. 

Improving on the popular Bixler 2, this latest kit is the perfect trainer plane or inexpensive FPV platform. Attach your flight camera into the nose or canopy of the plane to enjoy First Person View while flying. The Bixler 3 kit requires a motor, ESCs, a radio system and battery. 

ビクスラー2を改良したこの最新モデルは、完璧なRC練習機、完璧なRCグライダー、そして完璧な初心者FPV飛行機です。飛行機の機首またはキャノピーにフライトカメラを取り付けて、飛行中に一人称視点を楽しんでください。 ビクスラー3 PNFプレーンは、無線システムとバッテリーを必要とするプラグアンドフライモデルです。

If you're looking for a fast, fun, aerobatic sports model that can be flown just about anywhere, the H-King Super Kinetic is what you're after! From high-speed aerobatics including pylon style "bank and yank" flying to off-power gliding, the H-King Super Kinetic handles it all with ease. It's a truly versatile model that is a blast to fly.

Made of tough EPO, the Phoenix V2 glider fuselage has been blow moulded with pylon formers to make it near indestructible. The Phoenix was made to last a lifetime with its smooth, rigid, yet remains light enough for the glider to perform. Assembly can be completed in under 15 minutes so you'll be flying in no time.

ビクスラー1.1は、初心者から中級パイロットまで、実績のある電気ラジコン飛行機です。安定性、耐久性、手頃な価格でよく知られているビクスラー1.1は、市場で最高の初心者向けラジコン飛行機の1つです。また、安価なFPVプラットフォームとしても優れた選択肢であり、週末の怠惰な午後に最適です。

The Phoenix 2400 is the largest glider in the Phoenix range. It comes with an almost indestructible ABS plastic hull and strong EPO foam wings and tail section. With its smooth, stiff hull, the Phoenix is ​​durable for a lifetime and yet light enough for the glider to work without any problems. An additional canopy with camera mount is included. Once you have your camera installed, you can either enjoy FPV flying or just take pictures of your flights.

A replacement fuselage with canopy for the Volantex Ranger 1600, and Ranger 2000 electric gliders.

The Ranger 2000 is easy to assemble and features a large wingspan which provides stability, and also allows the model to fly at slow speeds. The EPO wings are fitted with two spars for strength and each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Ranger 2400 is a large electric powered pusher glider that has been specifically designed for FPV flying.  The enormous fuselage has plenty of room for large capacity or twin battery packs, radio and stabilizer components, FPV equipment, and molded into the front just below the nose is a purpose-made provision for an FPV camera. Also included is the usual Volantex camera mount that can take the place of the black canopy if you wish. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 robust metal spars join the wings to the fuselage. Also, each of the large ailerons is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using the popular Volantex fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix V2 2000 is a quick and easy to assemble electric powered glider with flaps and large ailerons for a precise, aerobatic performance. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

The Phoenix 2400 is an extended wing version of the popular Phoenix 1600mm and 2000mm range of electric powered gliders. Assembly is quick and easy with no glue required, the vertical fin and horizontal stabilizer are simply screwed to the rear of the fuselage. The EPO wings are fitted with a carbon spar for strength and 2 metal spars join the wings to the fuselage. Also, each aileron is reinforced with carbon to eliminate any chance of distortion or twisting. The wings are attached to the fuselage using fast connect clips, after flying, simply squeeze the clips to release the wings.

A replacement canopy for the Volantex Ranger 1600, Ranger 2000, and Phoenix V2 electric aircraft.

A replacement horizontal stabilizer with elevator, and vertical stabilizer with rudder for the Volantex ASW 28, suitable for versions V2 and V3. 

A replacement wing set for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement fin, rudder, and horizontal stabilizer for the Volantex Ranger 2000, and Phoenix V2 electric aircraft.

A replacement wing set for the Volantex Ranger 2400, and Phoenix 2400 electric aircraft.