飛行機

This H-King version of the classic F4U Corsair warbird is manufactured in a superbly finished EPO foam in an authentic navy color scheme with the decals pre-applied. The Corsair is a very stable flyer in its own right, for most pilots, the gyro is not necessary. However, for beginners and low hours pilots, a 6 axis ORX flight stabilization system is supplied which makes it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6-axis digital gyro for ultra-fast control response, it can be switched from beginner to expert mode as your experience grows.

H-King Avro Lancaster V3 "Dumbo" Replacement Fuselage w/Decals & Tailwheel.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Main Wings w/Decals.

Please note: No motors, ESC's or servos are included, these are the foam parts only.

H-King Avro Lancaster V3 "Dumbo" Replacement Horizontal Stabilizer w/Elevators.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Vertical Stabilizers.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

H-King Avro Lancaster V3 "Dumbo" Replacement Nose Dome (Bomb Aimers Dome) and Gun Turret Set.

Note: These replacement parts are predominantly for the Lancaster V3 due to the color scheme, however, they will also fit versions 1 and 2.

These optional servoless electric retracts have been designed for the H-King Avro Lancaster and include scale looking wheels, they are suitable for versions 1, 2, and 3.

The subject of this kit is the German liaison aircraft built during WW11, the Fieseler Fi 156 Storch. The Storch (German for "Stork") is famous for its STOL (Short Take-Off and Landing) abilities and it had an incredibly low stall speed of only 31mph. It was mainly used during WW11 for reconnaissance, spotting for the army and forward operations, and medical evacuation. Its design incorporated hinged slats along the entire length of the wings leading edge and a hinged and slotted set of control surfaces ran along each trailing edge, this was split equally to form outboard ailerons and inboard flaps. Virtually nothing about the Storch is streamlined with bits sticking out everywhere including the side windows,  this with its long undercarriage hanging down gives it a unique long-legged bird look which is why it was given the name of "Storch".

A replacement pre-painted fuselage for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement upper and lower pre-painted main wing set with ailerons, horns, and cabane strut fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted horizontal stabilizer with elevator, carbon joining spar, and bracing wire fixings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted battery hatch with canopy for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale spinner with backplate for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pre-painted motor cowl with a detailed dummy engine for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement set of inter-plane, and cabane struts for the Durafly Gloster Gladiator Mk1 Biplane Fighter (6 pieces).

A replacement main landing gear set with fairings for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement pair of scale main landing wheels with hubs and fixing screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement tail wheel assembly with wheel for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement 3719-770KV brushless motor with prop adapter and X-Mount for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement prop adapter for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement accessory pack that includes pushrods, pushrod keepers, and screws for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement scale detailing pack that includes dummy exhausts, machine guns, and air intake for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement decal set for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A replacement rigging set that includes stranded flying wire and crimps for the Durafly Gloster Gladiator Mk1 Biplane Fighter.

A set of 4 replacement propeller blades for the H-King 800mm Hawker Tempest.

A replacement 3 blade propeller assembly with hub and screws for the H-King 750mm Chance Vought F4U Corsair.

A replacement spinner assembly with insert for the H-King 750mm Chance Vought F4U Corsair.

ホビーキングP-51「ギャロッピングゴースト」は、ホビーキングの新しいミニシリーズ「リノエーシズ」の最初のもので、エアレースで印象的な服を着た第二次世界大戦の戦闘機です。付属のストック3108-1070KVブラシレスモーターを備えたP-51「ギャロッピングゴースト」は、推奨される2200mah 4S LiPoを使用すると、100mphに近い速度で箱から出してすぐに非常に速いモデルを提供します。ただし、経験豊富な手で時速100マイル以上の速度をお探しの場合は、オプションのドロップインフィット3108-1170KV「Pro」ブラシレスモーターがあります。これにより、見栄えの良いReno Aceは、同じプロペラ、ESC、および4Sバッテリーで、発射時に余分な回転トルクを処理できるものに対して、本当に弾道的なパフォーマンスを発揮します。

ホビーキングリノエーシズP-51「ギャロッピングゴースト」の交換用ウィングセット。 エルロンサーボカバー、プッシュロッド、および工場で適用されたデカールが含まれています

ホビーキングリノエーシズP-51「ギャロッピングゴースト」の交換用胴体セットには、工場で適用されたデカールが含まれています。 トップデッキ、キャノピー、カウルはこの胴体セットには付属していませんのでご注意ください。

A replacement horizontal stabilizer with elevator for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement cowl with factory-applied decals and mounting screws for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement spinner with backplate for the H-King Reno Aces P-51 "Galloping Ghost".

A replacement wing set with servo covers, and pushrods for the H-King Reno Aces Grumman F6F Hellcat "Little Nugget".